EAST���Ӳ�ϵͳ������ģʽ����

A three-channel far-infrared (FIR) HCN laser interferometer has been developed to measure the line averaged electron density on EAST tokamak. Detectors with the properties of high sensitivity, high signal-to-noise ratio, small volume and stability are needed in interferometer device. The application of new Schottky barrier diode (SBD) detector has made the density signal and the signal-to-noise ratio greatly improved. The disturbance caused by the lower hybrid wave can be eliminated by using double copper foil shield and narrow band pass filter. The improved detectors have worked well during the long pulse discharge and H mode discharge.     

The Effect of OMMT on the Morphology and Mechanical Properties of PVC/ABS Blends

Poly(vinyl chloride) (PVC)/acrylonitrile-butadiene-styrene (ABS) blends containing organically modified montmorillonite (OMMT) were prepared using a twin-screw extruder followed by injection molding. The OMMT dispersion was evaluated by X-ray diffraction and transmission electron microscopy. The clay was preferentially situated in the PVC phase and across the interfaces of PVC/ABS. The effect of the addition of OMMT on the morphology and mechanical properties was also evaluated. Scanning electron microscopy revealed a large reduction in domain size when OMMT was used. The mechanical properties were studied through tensile and impact tests. The yield stress increased when an appropriate amount of OMMT was used without impairing the impact strength.     

Reactive Compatibilization of Poly(Butylene Terephthalate)/Acrylonitrile-Styrene-Acrylate Blends by Epoxy Resin: Morphology and Mechanical Properties

The effect on the notched Izod impact strength of poly(butylene terephthalate) (PBT) by blending it with acrylonitrile-styrene-acrylate (ASA) was examined. Epoxy resin (ER) was demonstrated to be an efficient compatibilizer for the partially compatible blends of PBT/ASA. It requires only a very small amount of ER to improve the toughness of the PBT/ASA blends drastically. Furthermore, there exists an optimum proportion of ER added to achieve maximum notched Izod impact strength. Transmission electron microscopy (TEM) observation suggests that the ER in the PBT/ASA/ER blends suppressing the tendency of coalescence of ASA, leading to better dispersion of the ASA particles. Field emission scanning electron microscopy (FESEM) shows that ER enhances the phase dispersion and the interfacial adhesion between the PBT and ASA phases, it improves the compatibility between PBT and ASA. The compositions in the interphase was continuous, which results in multiphase composites with a graded interphase. It is suggested that enhanced interphase adhesion was necessary to obtain improved dispersion, fine phase morphology, and better toughness.     

Influence of Mixing Technique on Microstructure and Impact Properties of Isotactic Polypropylene/ Poly(Cis-Butadiene) Rubber Blends

Isotactic polypropylene/poly(cis-butadiene) rubber (iPP/PcBR vol%: 80/20) blends were prepared by melt mixing with various mixing rotation speeds. The effect of mixing technique on microstructure and impact property of blends was studied. Phase structure of the blends was analyzed by scanning electron microscopy (SEM). All of the blends had a heterogeneous morphology. The spherical particles attributed to the PcBR-rich phase were uniformly dispersed in the continuous iPP matrix. With increase of the mixing rotation speed, the dispersed phase particle's diameter distribution became broader and the average diameter of the separated particles increased. The spherulitic morphology of the blends was observed by small angle light scattering (SALS). Higher mixing rotation speed led to a more imperfect spherulitic morphology and smaller spherulites. Crystalline structure of the blends was measured by wide angle X-ray diffraction (WAXD) and small angle X-ray scattering (SAXS). The introduction of 20 vol% PcBR induced the formation of iPPβ crystals. Higher rotation speed led to a decrease in microcrystal dimensions. However, the addition of PcBR and the increase of mixing rotation speed did not affect the interplanar distance. The long period values were the same within experimental error as PcBR was added or the mixing rotation speed quickened. The normalized relative degree of crystallinity of the blends slightly increased under lower rotation speeds (30 and 45 rpm) and decreased under higher rotation speeds. The notched Izod impact strength of the blends was enhanced as a result of the increase of mixing rotation speed.     

The effect of thermal reactor neutron irradiation on semi-insulating GaN

Semi-insulating Gallium nitride was irradiated by fast and thermal neutrons with fluences from 10¹⁴ to 10¹⁶ n/cm². Depth-resolved cathodoluminescence spectroscopy was used to determine defects changes before and after irradiation. The results revealed two kinds of defects affected near-band emission recombination from two opposite directions. One was attributed to irradiation-induced N vacancies that contribute to near-band emission recombination. Another was attributed to irradiation-induced deep level defects that contribute to sub-band gap recombination and thus decrease the near-band emission recombination.     

Microplasma Technology and Its Applications in Analytical Chemistry

Abstract

This review article describes some existing microplasma sources and their applications in analytical chemistry. These microplasmas mainly include direct current glow discharge (DC), microhollow-cathode discharge (MHCD) or microstructure electrode (MSE), dielectric barrier discharge (DBD), capacitively coupled microplasmas (CCμPs), miniature inductively coupled plasmas (mICPs), and microwave-induced plasmas (MIPs). The historical development and recent advances in these microplasma techniques are presented. Fundamental properties of the microplasmas, the unique features of the reduced size and volume, as well as the advantageous device structures for chemical analysis are discussed in detail, with the emphasis toward detection of gaseous samples. The analytical figures of merit obtained using these microplasmas as molecular/elemental-selective detectors for emission spectrometry and as ionization sources for mass spectrometry are also given in this review article.     

电磁迴旋不稳定性的准线性理论

在有弱相对论性电子时,在电子迴旋频率Ω_e附近存在快x模的不稳定性。从这一事实出发,我们用准线性理论分析了具有粒子数倒转的分布函数引起的不稳定性最后达到饱和的物理机制。进行了一些近似的计算,求出了电磁迴旋不稳定性的饱和时间和饱和能量及垂直、平行分布函数随时间的演化过程。发现用此理论算出的饱和能级与观察到的AKR结果是一致的。 关键词：     

空间过滤简正波的模拟实验研究

在侧壁无消声的波浪槽（70×2×0.6m³）内,利用9根有水平指向性的长圆管换能器作阵元,实现了前四号简正波的空间过滤,定性地研究了简正波过滤阵抑制近场点源干扰的理论概念,并对起伏波浪表面对各号简正波振幅起伏的影响作了初步观察。     

从声全息图直接确定物体的位置

声全息术是用声波制作全息图,而用光波重建物像。在光学重建中,如果预先知道物体方位,则经过计算可确定像平面的位置而观察到像^[1]。     

Bergman空间A~p（ψ）中函数之零点

设Ｄ是Ｃ中的单位圆盘及为［０，１）上的正规函数。对于０＜Ｐ＜∞，这样的函数用于定义一个带权为￣ｐ（｜ｚ｜）／（１－｜ｚ｜￣２）的Ｂｅｒｇｍａｎ空间Ａ￣ｐ．本文刻画了Ａ￣ｐ中函数之零点集的结构．作为应用，又给出了Ａ￣ｐ中函数序列插值的条件。