Strong Morphological Effect of Mn3O4 Nanocrystallites on the Catalytic Activity of Mn3O4 and Au/Mn3O4 in Benzene Combustion

Gold nanoparticles (3–4 nm) were deposited on Mn₃O₄ nanocrystallites with three distinct morphologies (cubic, hexagonal, and octahedral). The resulting structures were characterized, and their activities for benzene combustion were evaluated. The dominant exposed facets for the three kinds of Mn₃O₄ polyhedrons show the activity order: (103)≈(200)>(101). A similar activity order was derived for the interfaces between the Au and the Mn₃O₄ facet: Au/(200)≈Au/(103)>Au/(101). The metal–support interactions between the Au nanoclusters and specific facets of the Mn₃O₄ polyhedrons lead to a unique interfacial synergism in which the electronic modification of the Au nanoparticles and the morphology of the Mn₃O₄ substrate have a joint effect that is responsible for a significant enhancement in the catalytic activity of the Au/Mn₃O₄ system.     

Activation of Hydrogen Peroxide by Ionic Liquids: Mechanistic Studies and Application in the Epoxidation of Olefins

Imidazolium‐based ionic liquids that contain perrhenate anions are very efficient reaction media for the epoxidation of olefins with H₂O₂ as an oxidant, thus affording cyclooctene in almost quantitative yields. The mechanism of this reaction does not follow the usual pathway through peroxo complexes, as is the case with long‐known molecular transition‐metal catalysts. By using in situ Raman, FTIR, and NMR spectroscopy and DFT calculations, we have shown that the formation of hydrogen bonds between the oxidant and perrhenate activates the oxidant, thereby leading to the transfer of an oxygen atom onto the olefin demonstrating the special features of an ionic liquid as a reaction environment. The influence of the imidazolium cation and the oxidant (aqueous H₂O₂, urea hydrogen peroxide, and tert‐butyl hydrogen peroxide) on the efficiency of the epoxidation of cis‐cyclooctene were examined. Other olefinic substrates were also used in this study and they exhibited good yields of the corresponding epoxides. This report shows the potential of using simple complexes or salts for the activation of hydrogen peroxide, owing to the interactions between the solvent medium and the active complex.     

Preparation and characterization of oxidized regenerated cellulose film for hemostasis and the effect of blood on its surface

Hemostatic effects of oxidized regenerated cellulose (ORC) are well-known but its mechanism has never been demonstrated clearly. Since thrombus formation is a kind of surface phenomenon, we changed the morphology of cellulose to form a kind of membrane with ionic liquid as solution, and also we prepared ORC films with nitrogen dioxide(NO₂)/carbon tetrachloride(CCl₄) oxidation system reacting for 16, 40, 64 and 88 h, respectively. FTIR and NMR spectra showed that NO₂/CCl₄ oxidation system had a high selectivity on hydroxyl group at C6 of regenerated cellulose. With the oxidation time prolonging, the carboxyl content was enhanced and the DP was reduced. The XPS results suggested that a new carboxyl bond was formed due to the increasing of oxygen content. From contact angle analysis, the wettability of blood on the ORC film surface was better than that of the regenerated cellulose film, which was beneficial for the blood to spread. SEM photographs showed that the ORC film oxidized for 40 h could adsorb and activate more platelets and erythrocytes. Hemostatic evaluation and enzyme-linked immunosorbent assay indicated that the ORC film had a dramatic hemostatic performance, and the products of platelets release reaction, activated platelets glycoprotein and activated clotting enzymes were increased simultaneously. Moreover, the possible mechanism of the hemostasis for ORC film was discussed.     

扑热息痛在Nafion-石墨烯-纳米金复合膜修饰电极上的电化学行为

利用Nafion,石墨烯(GS)和纳米金(AuNs)的N,N-二甲基甲酰胺(DMF)分散液制备了一种新型纳米复合膜修饰碳糊电极(CPE),建立了一种测定扑热息痛(PCT)的新方法。采用扫描电镜(SCE)对修饰电极进行了表征;利用循环伏安法(CV)研究了PCT在修饰电极上的电化学行为。利用微分脉冲溶出伏安法(DPSV)优化了测定PCT的试验条件。结果表明:PCT在Nafion/GS/AuNs修饰电极上于0.43V处出现了一灵敏的氧化峰(Epa),其电极过程受扩散控制。同时利用氧化峰可以进行微量PCT的检测,其峰电流(ip)与PCT浓度(c)在0.5～10μmol/L和10～900μmol/L范围内均呈良好的线性关系,相关系数分别为0.9968和0.9973,检出限(S/N=3)为0.1μmol/L。复合膜修饰电极稳定性较好,可用于实际药品中扑热息痛的含量的快速检测。     

双酚A在壳聚糖石墨烯复合膜电化学传感器上的电化学行为及测定

采用hummers法制备了石墨烯,以碳糊电极为基底电极采用滴涂法制备了壳聚糖石墨烯复合膜电化学传感器(CTS/GR/CPE),并利用循环伏安法和线性扫描溶出伏安法研究了双酚A在电化学传感器上的电化学行为。在pH 7.4的磷酸盐缓冲液中,于-0.1V富集180s后,该电化学传感器对双酚A具有良好的电催化作用,于0.564V处有一灵敏的氧化峰,线性范围为1.00×10-6～7.00×10-5mol/L和7.00×10-5～1.00×10-3mol/L,检出限(S/N=3)为1.00×10-7mol/L。方法用于塑料制品中溶出双酚A的测定,回收率为96.4%～100.5%。     

基于适体竞争机理的溶菌酶电化学传感器

制备了基于溶菌酶适体竞争机理的信号减弱型电化学传感器,在玻碳电极上修饰羧基化的多壁碳纳米管,将带有氨基的互补适体DNA连接到多壁碳纳米管上。由于道诺霉素崁入电极上的互补DNA,而产生电化学信号,当有目标物时,适体与结合力更高的溶菌酶结合,原本的互补链解链,导致插入双链的道诺霉素脱落,电化学信号减弱。以微分脉冲伏安法测定溶菌酶,响应的范围为1～500 nmol/L,相关系数0.999,检测下限为0.5 nmol/L(S/N=3)。     

含绿色荧光蛋白发色团双自由基分子的非线性光学性质

采用密度泛函理论(DFT)方法研究了系列含绿色荧光蛋白发色团双自由基分子光学异构体的几何结构、极化率(αs)和第一超极化率(βtot).结果表明,引入电子给受体取代基使分子的极化率增大,而对第一超极化率有不同影响.对于光照前的反式结构,引入电子受体βtot值增加,且βtot值随取代基吸电子能力的增强而增大;引入电子给体βtot值降低,且βtot值随取代基给电子能力的增强而减小.当分子变成相应的顺式结构时,其βtot值变化趋势与反式结构的结果正好相反.光异构化前后分子的βtot值变化不同,引入电子受体使顺式结构的βtot值比反式结构的小,其中―NO2使顺式结构的βtot值减小为反式结构的1/6;引入电子给体使反式结构的βtot值比顺式结构的小,其中―NH2使反式结构的βtot值减小为顺式结构的1/6.从而,光异构化起到调节非线性光学(NLO)响应的作用.     

活性炭基软包装超级电容器用有机电解液

使用了一种新型的有机电解液(三乙基甲基四氟硼酸铵/(丙烯碳酸酯+乙腈): MeEt₃NBF₄/(AN+PC))和两种传统有机电解液(四乙基四氟硼酸铵/丙烯碳酸酯(Et₄NBF₄/AN)和四乙基四氟硼酸/乙腈(Et₄NBF₄/PC)), 制作成活性炭(AC)基软包装超级电容器. 在不同电压窗口下对新型有机电解液的循环伏安和电化学阻抗谱进行了表征, 并在0-3 V的电压窗口下, 通过循环伏安、电化学阻抗谱、恒流充放电、漏电流、自放电、循环寿命和库仑效率, 对以上三种电解液进行了综合的比较. 结果表明, 新型有机电解液综合了AN和PC各自的优点, 性能优异.     

正癸烷与二甲苯在超临界压力下的热裂解

采用连续流动装置对正癸烷和二甲苯在超临界压力下的热裂解对比研究. 用气相色谱和色质联用仪对其气相产物和液相产物进行分析, 计算气相产物产率和裂解转化率, 并运用计算化学方法获得正癸烷和二甲苯不同化学键的键能, 从实验和理论上分析其裂解反应的难易程度和裂解规律. 实验结果表明, 在4 MPa和650、700、750 ℃条件下, 正癸烷比二甲苯更容易裂解, 正癸烷裂解产物以C₁-C₃小分子的烃类和氢气为主, 而二甲苯裂解产物主要为乙苯、甲苯和其它芳香类化合物; 键能计算结果表明, 正癸烷碳链骨架的C－C键能和C－H键能均较小, 裂解反应的诱发步骤应该是C－C键断裂, 而二甲苯苯环上C－C和C－H键能均较大, 裂解诱发步骤应该是侧链甲基脱氢反应. 因此正癸烷裂解反应以C－C键断裂和脱氢反应为主, 二甲苯裂解主要发生侧链甲基C－C键断裂和脱氢反应, 而芳环则比较稳定, 理论计算键能分析与裂解实验结果一致.     

AgGa(S1-xSex)2固溶体的电子结构和光学性质

采用基于赝势平面波基组的密度泛函理论方法, 对一系列具有黄铜矿结构的AgGa(S_1-xSe_x)₂固溶体的构型、电子结构、线性和二阶非线性光学性质进行了系统研究. 结果表明, 各固溶体具有类似的能带结构, 体系带隙随x值增加而逐渐减小. 当所引入的Hartree-Fock交换项贡献为22.56%时, 对应的杂化PBE泛函得到的带隙值与实验结果相近. 固溶体的各种光学性质, 包括折射率、双折射率、反射率、吸收系数和二阶倍频系数等均随着组成的改变呈现出有规律的变化趋势, 变化范围介于AgGaS₂和AgGaSe₂二者之间. 因此, 利用固溶体光学性质的变化规律, 可从中寻找出具有特定光学性能的晶体材料.