Suppercontinuum Generation in InP Nano Inner Cladding Fibers

The InP nano inner cladding fiber is fabricated by the method of modified chemical vapor deposition. The thickness of the InP nano thin film is about 16 nm. A 20 dB supercontinuum over 100nm in the telecommunication band is generated by infecting 1550nm, 120fs, 50MHz repetition rate optical pulse into this kind of fiber. Moreover, the results indicate that the width of the supercontinuum spectra can be influenced by the fiber length and pump power. The longer fiber at higher pump power can produce broader supercontinuum spectrum.     

溶胶-凝胶法制备氟化物薄膜光波导

以乙酰丙酮盐为原料,用溶胶——凝胶法（Ｓｏｌ－Ｇｅｌ）制备掺铒的锆钡镧铝（ＺＢＬＡ）氟化物薄膜光波导．第一步为制备包含锆钡镧铝及铒的溶胶;第二步为在基底上用旋转镀膜的方法镀膜及氟化．用这种方法得到的薄膜用扫描电镜测量了其组分和表面膜的形态．同时也测得膜的厚度和折射率．     

PLS-原子吸收光谱法同时测定稀土氧化物中的Eu和Cu

用偏最小二乘法（ＰＬＳ）校正了火焰原子吸收分析中Ｅｕ３２４．７５３ｎｍ对Ｃｕ３２４．７５４ｎｍ吸收线重叠干扰,用铜空心阴极灯同时测定了合成样及稀土氧化物中的Ｅｕ和Ｃｕ。     

in-situ ESR AND RAMAN SPECTROSCOPIC STUDIES ON ELECTROPOLYMERIZATION OF PYRROLE

The in-situ transient ESR measurements reveal that the oxidized structure (PP++) of polypyrrole (PP) films has an electrocatalytic activity to the oxidation of pyrrole during the electropolymerization process. Surface-enhanced resonance Raman scattering (SERRS) effect was used to probe the structure of PP films in very early stages of the polymerization on gold electrodes. It is of special interest that the electropolymerization can take place at much less positive potentials (about 300 mV) under the irradiation of light. This photocatalytic effect may be applied to the pattern deposition of polymers.     

Octa-membered Water Ring Chain Based on Sulfonic Group in Ni(Ⅱ) Complex with 2-[(E)-(2-Oxidophenyl)methyleneamino]Ethanesulfonato and 2,2''-Bipyridinyl

The title compound, [Ni(tssb)(2,2-bipy)2]·5(H2O) 1 (tssbH2 =2-[(E)-(2-oxido-phenyl)methyleneamino]ethanesulfonato, 2,2-bipy = 2,2'-bipyridinyl), belongs to orthorhombic,space group Pbcn with a = 20.3983(18), b = 17.6929(15), c = 17.0897(15) nm, V = 6167.8(9) nm3,Mr= 688.38, Z = 8, Dc = 1.481 g·cm-3, F(000) = 2880, μ = 0.758 mm-1 and S =1.099. Each NiⅡ atom is six-coordinated by one N and one O atoms from one tssb2- anion and four N atoms from two 2,2-bipy ligands to give a distorted octahedral geometry. Noticeably, there exists a rare octa-membered water ring which presents a 1D chain by sulfonic group.     

A novel secondary metabolite of Chinese ted alga Laurencia karlae

A novel skeleton compound benkarlaol (1) was isolated from the red alga Laurencia karlae Zhang et Xia, collected from the Nansha Islands in the South China Sea. Its structure and relative stereochemistry were determined by spectroscopic data, especially extensive 1D and 2D NMR experiments.     

应用离子色谱离线螯合及ICP-MS测定海水中多种痕量元素

简要介绍如何构建和运用离子色谱离线螯合系统结合ICP-MS方法分析海水中的痕量元素.     

N503萃淋树脂吸萃铟的研究

考察了Ｎ_（５０３）萃淋树脂在盐酸、氢溴酸、硫酸－溴化钠体系中对铟的吸萃性能，研究了Ｎ_（５０３）萃淋树脂在氢溴酸体系中吸萃铟的动力学和机理，发现Ｎ_（５０３）萃淋树脂吸萃铟的反应按假一级反应进行，并符合Ｆｒｅｕｎｄｌｉｃｈ等温吸附式。吸附平衡和红外光谱研究发现Ｎ_（５０３）萃淋树脂吸附铟的反应按下式进行：     

Mn改性Ni/K/MoS2合成低碳醇催化剂反应性能研究

以不同的添加方式在Ni/K/MoS2催化剂中加入Mn助剂，考察其合成醇反应性能。结果表明，Mn/Ni/K/MoS2催化剂具有较好的合成低碳混合醇反应性能。共沉淀法以醋酸锰为前驱体加入0.6%的Mn助剂后，C2+含量，醇时空产率及选择性均明显提高;分步沉淀法使Mn的加入量增加到0.6%，醇时空产率明显增加。以浸渍法按化学计量加入Mn助剂考察其含量对催化剂合成醇性能的影响，当Mn/Mo（原子比）为1∶时，反应条件为315 ℃, 9.5 MPa, 6 000 h－1，醇时空产率和醇选择性分别达到最高值0.338?g/mL·h和69.6%。300 h的稳定性测试结果表明，共沉淀法改性的催化剂具有良好的稳定性。     

光催化材料NiO-TiO2/SiO2的结构与性能研究

采用表面改性法制备了负载型NiO-TiO2/SiO2复合半导体材料,用X射线衍射、比表面测定、透射电镜、红外光谱、拉曼光谱、紫外-可见漫反射等技术,研究了光催化材料的物相结构、微粒尺寸、光响应性能及其能带结构.结果表明:复合半导体材料具有较高的比表面积,NiO和TiO2在材料表面产生相互修饰作用,NiO的加入促进了TiO2在载体表面的分散程度,两者复合后部分地形成了Ni-O-Ti键联.复合后的NiO-TiO2/SiO2增强了对紫外光的吸收性能,而且NiO与TiO2间的n-p复合效应改变了原来TiO2单一的能带结构,有效的抑制了光生电子和空穴的复合,从而明显提高材料的光催化性能.