Synthesis and Crystal Structure of 7α-[（R）-1-Hy droxyl-1-methyl-3-（ thien-2-yl）-propyl]-6,14-endoethanotetrahydrothebaine

1 INTRODUCTION Opioid analogues still remain important drugs for the relief of severe pain and morphine is still the drug of choice in such situations. For many years, the search for new centrally acting opioid deriva- tives with pain-relieving properties and without un- desired side effects, such as addiction, obstipation, etc., has been the goal of a large number of scien- tists[1-3]. Consequently, a wide variety of modifyca- tions of the well-known alkaloids morphine, codeine and thebai…     

Determination of Ultratrace Amounts of Copper(Ⅱ) in Water Samples by Electrothermal Atomic Absorption Spectrometry After Cloud Point Extraction

A novel approach was developed for the determination of ultratrace amounts of copper in water samples by using electrothermal atomic absorption spectrometry (ETAAS) after cloud point extraction (CPE). 1-( 2-Pyridylazo)-2-naphthol was used as the chelating reagent and Triton X-114 as the micellar-forming surfactant. CPE was conducted in a pH 8.0 medium at 40 ℃ for 10 min. After the separation of the phases by centrifugation, the surfactant-rich phase was diluted with 1 mL of a methanol solution of 0. 1 mol/L HNO3. Then 20 μL of the diluted surfactant-rich phase was injected into the graphite furnace for atomization in the absence of any matrix modifier. Various experimental conditions that affect the extraction and atomization processes were optimized. A detection limit of 5 ng/L was obtained after preconcentration. The linear dynamic range of the copper mass concentration was found to be 0-2.0ng/mL, and the relative standard deviation was found to be less than 3.1% for a sample containing 1.0 ng/mL Cu(Ⅱ). This developed method was successfully applied to the determination of ultratrace amounts of Cu in drinking water, tap water, and seawater samples.     

Simultaneous Reduction of Nitro Group and S-S Bond in Nitrodisulfides by Samarium Diiodide: A New Approach to Benzothiazolines

Asapowerfulandversatileone-electrontransferreductant,Sml,hasbeenappliedwidelyinorganicsynthesis'.OurpreviousworksonthereductionofnitrocompoundsandreductivecleavageofS-S,Se-Se,Te-TebondswithSml,'ledustoinvestigatethesimultaneousreductionofnitrogroupandS-SbondbySml,.Benzothiazolinesderivativesareimportantreagentsandusefulintermediatesinorganicsynthesisandpharmaceuticalchemistry.Forinstance,theycanbeusedasadditionagentsforphotographicemulsions",effectiveacaricides",antituberculousagents",lubr…     

固固反应合成三碘化锑、三碘化铋与硫脲配合物

通过三碘化锑和三碘化铋与硫脲间的室温固固反应合成了三碘化锑、三碘化铋的硫脲配合物 ,其组成为 :M[CS( NH2 ) 2 ]3 I3 ( M=Sb,Bi)。两种配合物的晶体结构均属于单斜晶系 ,锑配合物 Sb[CS( NH2 ) 2 ]3 I3 的晶胞参数为 :a=1 .4 772 nm,b=1 .6 5 82 nm,c=2 .0 6 74 nm,β=90 .81°,铋配合物 Bi[CS( NH2 ) 2 ]3 I3 的晶胞参数为 :a=1 .4 0 1 0 nm,b=2 .0 1 6 8nm,c=2 .0 397nm,β=90 .84°。远红外光谱表明硫脲中的 N原子而非硫原子参与了配位     

铂电极上异黄樟油和胡椒醛电氧化的SERS研究

采用循环伏安(CV)法和原位表面增强拉曼光谱(SERS)技术, 研究了非水体系中反应物异黄樟油和目标产物胡椒醛在粗糙铂电极上的电氧化行为, 发现胡椒醛在电位≥1.50 V时将进一步氧化, 而且从分子水平证实, 在胡椒醛的氧化电位(≥1.50 V) 下, 波长为632.8 nm的激光对胡椒醛的氧化有助催化作用. 由异黄樟油直接电氧化合成胡椒醛的电位(E)应控制在1.20 V相似文献   

新型Zhuo酚酮类糖苷化合物的合成

根据Zhuo酮的结构特点，对Zhuo酚酮类化合物与半乳糖的Kenigs-Knorr反应进 行了研究。探索出一种具有较高立体选择性的合成方法，从而制得四种具有β－构 型的单一端基异构体的Zhuo酚酮半乳糖苷新化合物。生成的新化合物不但保持了原 有的生理活性，而且降低了毒性、提高了药效，为人工合成Zhuo酚酮类增添新化合 物的同时，也扩展了此类化合物的应用领域。应用元素分析、核磁共振、红外光谱 表征了它们的结构。     

Si中30度部分位错弯结运动特性的分子模拟

首先使用分子动力学方法(MD)得出了左弯结(LK)和右弯结(RK)在不同温度和剪应力作用下的速度特性和运动过程.然后利用基于紧束缚势(TB)的nudged elastic band(NEB)方法计算LK和RK的迁移势垒.由计算结果得出,单个LK或RK的势垒很高,运动速度相对较慢;LK中的多弯结对结构和由RK分解产生的右弯结-重构缺陷(RC)能够加速位错运动;其中,RC能促进30°部分位错更快地迁移.     

Theoretical Studies on the Isomerization of Peroxynitrite to Nitrate Mediated by Peroxynitrous Acid

The conversion of peroxynitrite （ONOO-） to nitrate （NO3-） mediated by peroxynitrous acid （ONOOH） has been investigated at the CCSD/6-311G（d）//B3LYP/6-31 1＋G（d,p） level. Two kinds of pathways for the title reaction were found. The results show that the energy barrier of isomerization through pathway 1 is around 25 kcal/mol in the gas phase. This value is significantly lower than that of isomerization without any catalysts. Thus, it indicates that ONOOH definitely makes the conversion from ONOO- to NO3- feasible. Although pathway 2 does not decrease the energy barrier of this isomerization, peroxynitric acid （O2NOOH） was obtained; moreover, this is a new pathway for this formation. In view of the results that peroxynitrate anion can decompose into nitrite and dioxygen, we conclude that our results are consistent with the experimental observation that nitrate, nitrite, and dioxygen are the main final products of the decay of peroxynitrite around pH 7.     

基于深度学习的ELM实时识别研究

基于深度学习的方法,在HL-2A装置上开发出了一套边缘局域模(ELM)实时识别算法。算法使用5200次放电数据(约24.19万数据切片)进行学习,得到一个深度为22层的卷积神经网络。为衡量算法的识别能力,识别了HL-2A装置自2009年实现稳定ELMyH模放电以来所有历史数据(约26000次放电数据),共识别出1665次H模放电,其中误识别35次,误报率为2.10%。在实际的1634次H模放电中,漏识别4次,漏识别率为0.24%。该误报率和漏报率可以满足ELM实时识别的精度要求。识别算法在实时控制环境下,对单个时间点的平均计算时间为0.46ms,可以满足实时控制的计算速度要求。     

粘弹性地基上含孔隙的石墨烯增强功能梯度板的振动

为分析粘弹性地基上含孔隙的石墨烯增强功能梯度板的自由和强迫振动特性,基于三参数粘弹性地基模型及复合材料薄板理论,建立了粘弹性地基上含孔隙石墨烯增强功能梯度板的运动方程,用伽辽金法求解其固有频率和动力响应,并通过数值算例分析了粘弹性地基参数、孔隙率、孔隙类型及石墨烯纳米片分布模式、含量等因素对自由振动和动力响应的影响.结果表明,固有频率随着孔隙率的增大非单调变化,孔隙率对固有频率的影响随着地基参数、孔隙类型的不同而不同.另外,在三种孔隙类型中,上下表面层含有最少孔隙数量的板的动挠度最小,且其动挠度随着孔隙率的增大而微弱提高.