水/硅胶吸附体系的热化学研究

我们用精密自动绝热量热计测定了几种不同吸附水含量的水/硅胶吸附体系在200～320 K温度范围内的热容. 结果表明, 当吸附水含量使表面复盖度(θ)大于1时, 在相应的C_p～T曲线上会出现吸附水的相变峰. 这说明吸附在硅胶表面上的水分子已经形成了聚集态; 而当θ<1时, 由于尚未形成聚集态水, 故没有相变过程出现, 其C_p～T曲线呈光滑状. 这些现象与H_2O/γ-Al_2O_3吸附体系是一致的. 又由于硅胶表面对水分子的吸附力较γ-Al_2O_3的要小, 故在同样的吸附量的C_p～T曲线上, 水/硅胶的峰要比H_2O/γ-Al_2O_3的尖锐, 且蜂温增高的速度要快. 这些都表明, 吸附在硅胶表面上的二维表相水会随吸附量的增加而以较快的趋势接近于体相水. 此外, 由不同含水量的C_p～T曲线外推, 求出了不含吸附水的硅胶在200～300 K范围内的热容.     

Elution of Cationic Species with/without Ion Pair Reagents from Polar Stationary Phases via SFC

Traditionally, the application of supercritical fluid chromatography has been limited to compounds of relatively low polarity. Thus, we report here that one secondary amine and two quaternary amine salts were successfully eluted from a Deltabond Cyano-bonded silica column with the addition of sodium alkylsulfonate to the methanol-modified, carbon dioxide-based mobile phase. A possible ion-pairing interaction between the positively charged analytes and the anionic part of the sulfonate additive has been proposed. In another set of experiments, the three amine salts readily eluted from both Ethyl-pyridine-bonded silica and Amino-bonded silica phases without the need of additive although the peak shapes were less than desirable. The addition of sulfonate salt to the mobile phase again sharpened the peaks. In the presence of a mixture of methanol and CO₂, we suggest that these stationary phases are positively charged. We describe here also for the first time the employment of a strong silica-based anion exchange (SAX) column for supercritical fluid separation of cationic species. Two elution mechanisms were proposed for the three amine salts depending upon whether the ionic additive was incorporated into the mobile phase. Separation as the ion-pair was proposed with an ionic additive in the mobile phase; whereas separation of the intact amine salt from the positively charged basic stationary phases was suggested to be operational without the ionic additive.     

Solvent effects on infrared spectra of methyl 4-hydroxybenzoate in pure organic solvents and in ethanol/CCl4 binary solvents

Infrared spectroscopy studies of methyl 4-hydroxybenzoate (MHB) in 17 different organic solvents and in ethanol/CCl4 binary solvent were undertaken to investigate the solvent-solute interactions. The frequencies of carbonyl stretching vibration nu(C=O) of MHB in single solvents were correlated with the solvent acceptor number (AN) and the linear solvation energy relationships (LSER). The assignments of the two bands of nu(C=O) of MHB in alcohols and the single one of that in non-alcoholic solvents were discussed. The shifts of nu(C=O) of MHB in ethanol/CCl4 binary solvents showed that several kinds of solute-solvent hydrogen bonding interactions coexisted in the mixture solvents, with a change in the mole fraction of ethanol in the binary solvents.     

P(St-co-MAA)乳液体系对CaCO3结晶的调控

大量研究表明, 有机/无机界面上的相互作用[1]是控制无机结晶的晶型、形貌、粒径等特征的决定因素. 本文利用乳液聚合方法合成了在诱导无机矿化后依然保持较为刚性界面的、能与无机离子作用的微球, 并在乳液中进行碳酸钙结晶实验, 用XRD, FTIR和SEM等手段对结晶进行了表征.     

离聚体水基微乳液化的研究——聚苯乙烯离聚体微乳化过程相反转的表征

以乙酰磺酸为磺化剂制备磺化度为３～１５ｍｏｌ％的磺化聚苯乙烯（ＳＰＳ）并中和成盐．在一定的温度和搅拌速率下，加水将ＳＰＳ乳化成水包油的稳定水基微乳液．用乳化过程中体系电导率和粘度的变化表征了乳化相反转过程．研究了溶剂的极性和离子含量对聚苯乙烯离聚体溶液可乳化性和乳化过程及乳液稳定性的影响．     

Synthesis and Crystal Structure of Two One—dimensional Chain Copper Complexes [Cu（TTA）2（4,4‘’—azpy）] and [Cu（TTA）2（3,3‘’—azpy）

Two copper complexes [Cu(TTA)₂(4,4′‐azpy)] (1) and [Cu‐(TTA)₂(3,3′‐azpy)] (2) (HTTA = 1,1,1‐trifluoro‐3‐(2‐thenoyl)‐acetone, 4,4′‐azpy = 4,4′‐azobispyridine, 3,3′‐azpy = 3,3′‐azobispyridine) were synthesized and characterized. The crystal structures were determined by X‐ray diffraction analysis. The crystal 1 belongs to triclinic with space group P1 , a = 0.8515(2) nm, b = 0.9259(2) nm, c = 0.9468(2) nm, a = 66.126(9)°, β = 79.667(9)°, γ = 90.13(1)°, Z = 1, V = 0.6692(2) nm³, D_c = 3.425 g/cm³, γ = 2.113 mm^?1, F(000) = 694, R₁ = 0.0594, wR₂ = 0.1499. The crystal 2 belongs to monoclinic with space group P2₁/c, a = 1.0661(2) nm, b = 1.4296(3) ran, c = 1.0041(3) nm, β = 114.50(3)°, V = 1.3926(5) nm³, Z = 2, D_c = 1.646 g/ cm³, μ = 1.015 mm^?1, F(000) = 694, R₁, = 0.0535, wR₂ = 0.1113. In the crystals of complexes 1 and 2, the copper atoms have distorted octahedral symmetry. The two compounds possess very similar one‐dimensional linear chains linked through the rodlike 4,4′‐azpy ligands or 3,3′‐azpy ligands.     

Potential-energy surface for the electronic ground state of NH3 up to 20,000 cm-1 above equilibrium

Ab initio coupled cluster calculations with single and double substitutions and a perturbative treatment of connected triple excitations [CCSD(T)] with the augmented correlation-consistent polarized valence triple-zeta aug-cc-pVTZ basis at 51 816 geometries provide a six-dimensional potential-energy surface for the electronic ground state of NH3. At 3814 selected geometries, CBS+ energies are obtained by extrapolating the CCSD(T) results for the aug-cc-pVXZ(X=T,Q,5) basis sets to the complete basis set (CBS) limit and adding corrections for core-valence correlation and relativistic effects. CBS** ab initio energies are generated at 51,816 geometries by an empirical extrapolation of the CCSD(T)/aug-cc-pVTZ results to the CBS+ limit. They cover the energy region up to 20,000 cm-1 above equilibrium. Parametrized analytical functions are fitted through the ab initio points. For these analytical surfaces, vibrational term values and transition moments are calculated by means of a variational program employing a kinetic-energy operator expressed in the Eckart-Sayvetz frame. Comparisons against experiment are used to assess the quality of the generated potential-energy surfaces. A "spectroscopic" potential-energy surface of NH3 is determined by a slight empirical adjustment of the ab initio potential to the experimental vibrational term values. Variational calculations on this refined surface yield rms deviations from experiment of 0.8 cm-1 for 24 inversion splittings and 0.4 (3.0) cm-1 for 34 (51) vibrational term values up to 6100 (10,300) cm-1.     

Fast protein analysis enabled by high-temperature hydrolysis

While the bottom-up protein analysis serves as a mainstream method for biological studies, its efficiency is limited by the time-consuming process for enzymatic digestion or hydrolysis as well as the post-digestion treatment prior to mass spectrometry analysis. In this work, we developed an enzyme-free microreaction system for fast and selective hydrolysis of proteins, and a direct analysis of the protein digests was achieved by nanoESI (electrospray ionization) mass spectrometry. Using the microreactor, proteins in aqueous solution could be selectively hydrolyzed at the aspartyl sites within 2 min at high temperatures (∼150 °C). Being free of salts, the protein digest solution could be directly analyzed using a mass spectrometer with nanoESI without further purification or post-digestion treatment. This method has been validated for the analysis of a variety of proteins with molecular weights ranging from 8.5 to 67 kDa. With introduction of a reducing agent into the protein solutions, fast cleavage of disulfide bonds was also achieved along with high-temperature hydrolysis, allowing for fast analysis of large proteins such as bovine serum albumin. The high-temperature microreaction system was also used with a miniature mass spectrometer for the determination of highly specific peptides from Mycobacterium tuberculosis antigens, showing its potential for point-of-care analysis of protein biomarkers.

A high-temperature microreaction system is developed for fast and selective hydrolysis of proteins, enabling direct analysis of protein biomarkers by mass spectrometry.     

Effect of PEG on the crystallization of PPDO/PEG blends

A new biodegradable polymer system, poly(p-dioxanone) (PPDO)/poly(ethylene glycol) (PEG) blend was prepared by a solvent casting method using chloroform as a co-solvent. The PPDO/PEG blends have different weight ratios of 95/5, 90/10, 80/20 and 70/30. Crystallization of homopolymers and blends were investigated by differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD). When 5% of PEG was blended, the crystallization exothermal peaks (T_c) of PPDO increased sharply and the crystallization exothermal peaks (T_c) of PEG decreased slightly compared with the homopolymers. The crystallization rates of both components increased, and caused greater relative crystallization degree (X_t%). But when the content of PEG was more than 5%, the crystalline behaviors of blends had no more significant changes accordingly. The melting points of each sample varied little over the entire composition range in this study. The nonisothermal crystallization of PPDO homopolymer and blend (PPDO/PEG = 70/30) were also studied by DSC. The crystallization began at a higher temperature when the cooling rates were slower. The nonisothermal crystallization kinetics of blends was analyzed by Ozawa equation. The results showed that the Ozawa equation failed to describe the whole crystallization of the blend, but Mo equation could depict the nonisothermal crystallization perfectly.     

钐(II)类卡宾CH3SmCH2I与乙烯环丙烷化反应及溶剂化效应的理论研究

用密度泛函B3LYP方法研究了过渡金属钐类卡宾与乙烯的环丙烷化反应的机理. 对钐类卡宾试剂CH₃SmCH₂I和CH₂CH₂反应的反应物、中间体、过渡态和产物构型的全部结构几何参数进行了优化, 并计算了THF溶液的溶剂化效应, 用内禀反应坐标(IRC)计算和频率分析方法, 对过渡态进行了验证. 结果表明: CH₃SmCH₂I与CH₂CH₂环丙烷化反应按亚甲基转移机理(通道A)和卡宾金属化机理(通道B)都可以进行, 与锂类卡宾的反应机理相同, 通道A比通道B反应的势垒降低了14.65 kJ/mol. 溶剂化效应使通道B比通道A的反应势垒大幅度提高, 更有利于反应沿通道A进行, 而不利于通道B.