Separability Criteria for Quantum Mixed States in Terms of Trace Norm

A new necessary conditions for separability of mixed states in bipartite and multipartite quantum systems of arbitrary dimensions are presented. This method requires only a few local measurements. If a quantum state in a bipartite （or multipartite） system of arbitrary dimension is separable, we show that the trace norm of a constructive matrix is less than or equal to 1.     

Compact Single-Stage Femtosecond Multipass Ti：Sapphire Amplifier at 1 kHz with High Beam Quality

A compact femtosecond Ti：sapphire amplifier system is reported using single-stage multipass configuration with high beam quality. A high dispersion glass stretcher and a pair of double prisms for compression are introduced based on broadband femtosecond seed pulses. The non-grating-based pulse stretcher and compressor are advantageous to increase high beam quality and to reduce the high-order dispersion. A Gaussian filter is used to reduce the gain narrowing effect in amplification. The compact femtosecond Ti：sapphire nine-pass amplifier delivers pulses with a duration of 26 fs and an energy of 800μJ at 7mJ pumping pulses energy at I kHz. The 1-kHz femtosecond amplifier with high beam quality and high stability is very suitable for ultrafast physics research applications, such as attosecond science, ultra-precision micromachining, and THz wave generation.     

轴对称流场干涉条纹折射率的模拟计算

提出一种获取流场干涉条纹折射率分布的新方法。该方法首先采用不等间隔的环带分割轴对称流场,使折射率变化大的地方获得的数据点密,然后通过对Abel变换进行离散数值计算来获取流场的折射率分布。通过模拟轴对称流场的实时全息干涉条纹证明了该方法不仅简单易行,而且所获取的折射率分布精度高。     

有机溶剂热生长技术制备纳米CdS及其与聚苯胺复合膜的光学性能

以溶剂热生长技术(solvothermal technique)制备了半导体CdS的纳米微粒,并采用XRD、TEM、ED对其结构进行表征。在ITO导电玻璃上,采用电化学方法合成聚苯胺薄膜,以提拉的方法将CdS的纳米颗粒涂布其上,自组装得纳米CdS／PANI膜,并以荧光光谱(PL)及非线性Z-扫描法研究其光学特性。实验结果显示：经CdS修饰后,CdS／PANI膜的荧光发射峰强度增强,位置较单一PANI膜移至420nm处,同时经修饰后的复合物膜的非线性光学特性也有显著的提高。     

等离子体辅助甲烷聚合物制备及分析

在氢气和甲烷环境下,利用辉光等离子体放电制备了聚合物。该聚合物的外观特征为白色、略发黄、柔软、丝状,易碎为粉末状。聚合物中含有–CH3,–CH2,C–O,–C=C–,–OH等官能团且不存在单质形态的碳。有机溶剂溶解分析发现,常温下该聚合物在各种有机溶剂中的溶解性极小、小于0.1mg.ml^-1,几乎不溶于甲苯中,在不同有机溶剂中的溶解度大小依次为,S丙酮>S三氯甲烷>S乙醇>S环己醇>S甲苯。低温等离子体的离化率越高、中性气体被极化时的极化半径越大、环境温度越低以及介电常数越小,聚合物的生成能力越强。     

Nd:YAG激光器光栅式扫描预处理的计算模拟与优化分析

 采用计算模拟的方法,研究了光栅式扫描预处理的扫描方式以及脉冲能量波动、定位误差对预处理效率的影响。研究发现,脉冲能量波动及其定位误差使预处理效率降低,同时其影响与扫描方式之间存在相互调制作用,因此可以通过选择合适的扫描方式以及扫描间隔来优化预处理流程,提高预处理效率。此外发现,光斑呈等边三角形排列时的预处理效率优于正方形。     

M+AsF6-(M=Li,Na,K,Rb和Cs)离子对的结构和振动光谱

利用abinitio计算方法研究了AsF6-阴离子和M AsF6-(M =Li ,Na ,K ,Rb 和Cs )直接接触离子对的结构和光谱行为。结果表明,具有C3V结构三齿相互作用的M AsF6-最稳定,二齿配位的结构只有在特定条件下才可能稳定存在。当形成离子对后,阳离子与AsF6-的相互作用将改变AsF6-的结构,这其中Li 的影响最大。另外,AsF6-光谱的变化可用来指认溶液中离子的缔合和离子对的种类。     

Generalized Uncertainty Principle and Thermodynamic Quantities of SAdS5 Black Hole

Recently, there has been much attention devoted to resolving the quantum corrections to the Bekenstein- Hawking black hole entropy. The different correction leading terms are obtained by the different methods. In this paper, we calculate the correction to SAdS5 black hole thermodynamic quantity due to the generalized uncertainty principle. Furthermore we derive that the black hole entropy obeys Bekenstein Hawking area theorem. The entropy has infinite correction terms. And every term is finite and calculable. The corrected Cardy-Vedinde formula is derived. In our calculation, Bekenstein Hawking area theorem still holds after considering the generalized uncertainty principle. We have not introduced any hypothesis. The calculation is simple. Physics meaning is clear. We note that our results are quite general. It is not only valid for four-dimensional spacetime but also for higher-dimensional SAdS spacetime.     

克林霉素磷酸酯的波谱学研究

克林霉素磷酸酯是临床上广泛使用的一种抗菌类药物. 本文对克林霉素磷酸酯进行了¹H、¹³C、³¹P NMR检测,通过DEPT、¹H-¹H COSY、¹³C-¹H HSQC、¹³C-¹H HMBC等2D NMR技术对该化合物的¹H、¹³C谱的信号进行了全归属,并结合量子化学计算和NOESY谱证实了化合物的立体结构. 另外,对克林霉素磷酸酯的飞行时间质谱(TOF-MS)的裂解途径进行了分析.     

Numerical Simulation of Random Close Packing with Tetrahedra

The densest packing of tetrahedra is still an unsolved problem. Numerical simulations of random close packing of tetrahedra are carried out with a sphere assembly model and improved relaxation algorithm. The packing density and average contact number obtained for random close packing of regular tetrahedra is 0.6817 and 7.21 respectively, while the values of spheres are 0.6435 and 5.95. The simulation demonstrates that tetrahedra can be randomly packed denser than spheres. Random close packings of tetrahedra with a range of height are simulated as well. We find that the regular tetrahedron might be the optimal shape which gives the highest packing density of tetrahedra.