Syntheses and Vasodilatory Activities of New Pyrazolo [ 4,3-d ] pyrimidin-7-ones

IntroductionAdenosine 3′,5′-cyclic monophosphate (cAMP)and guanosine 3′,5′-cyclic monophosphate(cGMP) areubiquitous second messengers that mediate biologicalresponses to a variety of extracellular cues, includinghormones, neurotransmitters, chemokines…     

New BCN Fibres for Strong Ultraviolet and Visible Light Luminescence

Novel B3CN3 fibres with a special structure have been synthesized by a pyrolysis process. High-resolution TEM analysis shows that the as-prepared B3CN3 fibres can be described as a nanofibre-interweaved network. Strong photoluminescence at 370 nm and 700 nm from the as-prepared B3 CN3 fibres are observed at room temperature, which suggests that B3 CN3 is a promising ultraviolet- and visible-light-emitting material.     

Effects of Post-Thermal Treatment on Quality of SiC Grown by PVT Method

We report the effects of post-thermal treatment on the quality of 2-inch 6H-SiC wafer cut from a crystal boule grown by physical vapour transportation method. The full widths at half maximum of x-ray diffraction rocking curves measured on sites across the 2-inch wafer become narrower, indicating the quality improvement after a three-step post-thermal treatment. It is found that the most common defects such as micropipes and inclusions can be significantly reduced after the treatment. Our results show that the post-thermal treatment is an effective route to improve the quality of SiC single crystals.     

Modulation Frequency Multiplexed Tunable Diode Laser Spectroscopy System for Simultaneous CO, CO2 Measurements

A modulation frequency multiplexed dual diode-laser system is developed for simultaneous detection of the two most common fire gas products CO and CO2. Simultaneous detection is achieved by modulating each laser at different frequencies, demodulating the signal by a pair of lock-in amplifiers for each gas. Laser beams are combined and detected by one detector after passing through an identical optical path. The experimental results show little performance degradation associated with modulation frequency multiplexing, and no cross-talk between the two multiplexed detection channels is measured.     

垂直上升管内液体横掠流动传热特性研究

本文对单相水和单相油横掠流动时的平均换热特性进行了实验研究,对试验的结果进行了分析和讨论,并对实验数据进行关联,得到了垂直上升管内单相水和单相油横掠流动时的换热准则关系式。结果表明,狭窄空间条件下的液体横掠柱体时的流动换热对液相Re数的依赖,较大空间条件下的流动换热相比明显减小,并对单相水和单相油横掠流动时的换热性能进行了比较。     

�˻����/ͭ�ȵȾ�ѹ��ɢ���ӽ����Ӱ��

As the ITER first wall Be/CuCrZr hot isostatic pressing (HIP) bonding intermediate transition layer, Ti/Cu layer can form a multi-layer intermediate metal phase, and defects such as cracks occur between the Ti/Cu metal phases. CuCrZr was used instead of Be, and a number of CuCrZr/Ti/Cu/CuCrZr joints were fabricated by the same HIP process as Be/CuCrZr to analyze the Ti/Cu joints. The effects of stress relief annealing on joint strength and defect distribution of the joints unannealed, annealed at 400°C and 500°C respectively were studied. The results show that three layers of Ti/Cu diffusion layers are formed on both sides of the intermediate titanium layer, namely Cu₄Ti, CuTi and CuTi₂. The thickness of Cu₄Ti on the pure copper side is thicker than that on the CuCrZr side, so that the crack is almost entirely distributed at the junction of Cu₄Ti and CuTi on the pure copper side where brittle fracture is easy to occur in the tensile samples. As the annealing temperature increases, the generation and propagation of cracks decreases.     

圆形振动膜ZnO压电微传声器的研制

本文介绍了一种新型圆形振动膜ZnO压电微传声器的制备，并对传声器制备的工艺过程进行了较为详细的描述。圆形振动膜的压电传卢器与以前方形振动膜结构设计相比，较大幅度提高了传声器的灵敏度和成品率，灵敏度达到-70dB（相对于1V／Pa），成品率达到80％。     

采用Authorware 5制作现代光学实验多媒体课件

我们采用目前最流行的多媒体制作软件Authorware 5开发工具，把现代光学实验原理，公式推导，实验内容，步骤等字材料，以及用CCD采集的干涉图像，优美的背景音乐及解说词等多种数学信息，制作成多媒体课件，可直接用于远程教育，有较大的实用价值。     

举办《应用数学学校》和参加数学应用数学建模竞赛的实践和思考

通过开展应用数学教学活动和开办《应用数学学校》的多年实践 ,我校学生结合实际学习和应用数学知识的意识和能力不断提高 ,在上海市数学知识应用竞赛和美国大学生数学建模竞赛中连续取得好成绩 ,为了争取把这项工作做得更好 ,我们作了进一步思考和打算     

几种新的回归诊断图示模型及其医学应用

本文在变量选择问题的基础上，提出了一种新的图示模型──减变残差图。并给出它的两种推广形式：均值平移异常值检验图和部分影响诊断图。通过它们不但可以容易地考察一个变量在模型中的作用和检验异常值，而且可以诊断样本点对模型和变量的影响大小。