2020 Roadmap on two-dimensional nanomaterials for environmental catalysis

This roadmap demonstrates a series of two-dimensional nanomaterials, such as graphene, black phosphorus, oxides, layered double hydroxides, chalcogenides, bismuth-based layered compounds, MXenes, metal organic frameworks, covalent organic frameworks, and others, for environmental catalysis.     

铟锡氧化物(ITO)纳米颗粒的制备及表征

以金属In和SnCl₄·5H₂O为主要原料，加入保护剂PVP，利用化学共沉淀法合成了球形的铟锡氧化物(ITO)纳米颗粒。分别对PVP的用量、溶液的pH值、热处理温度等因素对ITO纳米颗粒粒径的影响进行了分析。并且借助透射电镜(TEM)、X射线衍射(XRD)对所合成的ITO纳米颗粒进行了表征。XRD分析说明本文合成了金刚砂型结构的铟锡氧化物纳米颗粒，并且其晶型结构随着热处理温度的升高而转变为铁锰矿型。     

取代苯体系的二阶非线性光学性质:动力学李代数方法

提出了一种动力学李代数方法来研究取代苯体系的非线性光学性质. 对于给定的PPP模型(Pariser-Parr-Pople)哈密顿量, 生成了一个动力学李代数. 依据这些代数元构造出演化算子作为群参数的函数, 通过求解一组非线性微分方程能够得到这些群参数. 再按照统计力学中的密度算子公式给出取代苯分子体系偶极矩的统计平均值. 于是导出二阶极化率的表达式. 与其他量子力学计算结果比较, 表明这种动力学李代数方法在预言有机共轭分子的非线性光学性质上同样有用.     

Preparation and NMR studies of cobalt-containing diphosphine ligand chelated W, Ru, Au and Pd complexes: Suzuki cross-coupling reactions and carbonylation catalyzed by the Pd complex

Treatment of a cobalt-containing diphosphine ligand, [[mu-P,P-PPh2CH2PPh2]Co2(CO)4[mu-PPh2C[triple bond]CPPh2]] 1 with metal complexes W(CO)6, Ru3(CO)12, AuCl(tht)(tht = tetrahydrothiophene) and (COD)PdCl2(COD = 1,5-cycloctadiene) gave 1-chelated metal complexes [(1)W(CO)4], [(mu-1)Ru3(CO)10] 4, [(1)(AuCl)2] 5 and [(1)PdCl2] 6, respectively. All these compounds were characterized by spectroscopic means whereas 3, 4 and 6 were also studied by X-ray diffraction. These compounds display chelating and bridging modes of metal-phosphine complexation. Variable-temperature 1H and 31P NMR experiments were carried out for 3-6 and revealed that the fluxional behavior of each individual bridging dppm fragment was affected greatly by the bite angle of 1 in each metal complex. Suzuki cross-coupling reactions were satisfactorily catalyzed by under mild conditions. The reactions of aryl halides or iodothiophenes with chloroform and alkali in biphasic solution utilizing a catalytic amount of result into the formation of benzoic and thiophenic acids, respectively.     

Ag／Al2O3选择性催化丙烯还原氮氧化物表面反应机理的原位红外光谱研究

 在富氧条件下Ag／Al2O3对以丙烯为还原剂选择性催化还原NOx的反应有很高的催化活性．本实验成功地利用原位红外光谱分析手段,在真实的催化反应条件下,探讨了丙烯选择性还原NOx的反应机理,证实了催化剂表面反应中间体Al－NCO和Ag－NCO虽在真空中稳定,但在实际反应条件下极为活泼．催化剂表面上R－ONO和R－NO2分解成NCO是整个反应的速度控制步骤．这一结论与在真空系统条件下对其反应机理的研究结果一致,证明了在这一反应体系中两种研究方法的相关性．同时本实验还从反应机理上探讨了催化剂的水蒸气中毒现象．水蒸气的存在阻碍了催化剂表面R－ONO和R－NO2的生成,并进一步阻碍了反应的速度控 制步骤,即R－ONO和R－NO2向Al－NCO和Ag－NCO的转化,但这是一种完全可逆的暂时中毒现象．结合相应的催化剂活性评价结果对表面反应机理进行了讨论．     

低能离子散射谱分析中的荷电效应及中和作用

用低能离子散射谱（ISS）对比分析了与样品托有良好电接触的和与样品托绝比的金属银片，观察到荷电效应对ISS分析有严重影响。实验还表明在ISS分析时使用低能电子中和枪可以有效地消除荷电效应，还发现电子中和枪的使用对于惰性气体离子的中和作用无明显影响。     

倒数示波计时电位滴定新技术

倒数交流示波极谱具有抑制充电电流、突出电解电流的优点,利用(dE/dt)~(-1)-E曲线上去极剂峰的突然消失或出现指示滴定终点的方法称作倒数示波计时电位滴定法.由运算放大器组装的模拟电子线路可以对(dE/dt)~(-1)-E曲线进行反馈、反对数及微分处理,从而获得各种类型的倒数示波计时电位曲线(图1),以进一步提高滴定的灵敏度。     

相反转技术制备环氧树脂水基体系——相反转过程的流变行为研究

对高乳化剂浓度下的相反转发展过程的流变行为进行了应力扫描、动态频率扫描实验表征．结果表明，乳化剂浓度较高时，体系发生完全相反转；体系在相反转点前为Ｗ／Ｏ结构，其粘度几乎不随剪切应力的改变而改变，表现为牛顿流体行为；体系在相反转点后为Ｏ／Ｗ结构，具有很高的粘弹性，并且在较高剪切应力下表现为典型的假塑性．这是由于高分子水基微粒间通过其表面覆盖的表面活性剂与水形成氢键而产生了一种静态结构，此结构在较高剪切应力作用下破坏而导致假塑性．     

优化几何构型对高级别从头算能量的影响

对《ＣＲＣ物理与化学手册》（第７７版）中第三周期以前的无机双原子分子,当其理论优化构型的相对误差大于２％时,分别在实验构型和最大偏差的理论构型下,计算了ＱＣＩＳＤ（Ｔ）／６－３１１＋Ｇ（３ｄｆ,２ｐ）能量并作了比较。结果表明,大多数能量的差别在４．２ｋＪ．ｍｏｌ＾－１以内。由此说明,目前一般采用的构型优化理论方法,多数情况下不至于明显影响单点高级别从头算的计算精度。同时还发现,Ｇ２（ＱＣＩ）的高级     

纳米核壳式铜-锡双金属粉的制备及性能研究

A kind of novel core-shell Cu-Sn bimetallic nanoparticles has been prepared by a new method (displacement method), in which Sn was made to cover on the surface of Cu nano-core. The preparation method and reaction mechanism have been discussed. This reaction happened under the existence of coordinate agent-(NH₂)₂CS and protective agent PVP. The nanoparticles prepared were with a core-shell structure, granule diameter between 50～100 nm and good dispersing capability. The Cu-Sn nanoparticles proposed has better oxidation-resistant ability than Cu nanoparticles with corresponding granule diameter and can be applied as lubricant additives as well as antibacterial agent. When the additive amount is very low (0.1wt‰～0.5wt‰), it can improve the P_B of the lubricant by 92%～106%, and also enhance its antiwear characteristics and friction-reducing properties. At the concentration of 1 000 ppm, it can reach an antibacterial ratio of 99.99%.