Thermal Transport in One-Dimensional FPU-FK Lattices

Thermal transport in the FPU model with Kutta algorithm. The heat flux, local temperature profile, that temperature gradient scales behave as N-1 linearly. FK on-site potential is studied by using fourth-order Runge- and heat conductivity axe simulated and analyzed. It is found The divergence of heat conductivity ~ with system size N is in term of κ ∝ N^α with α = 0.44. It is shown that thermal transport is mainly dependent on the FPU nonlinear and the FK interactions.     

Spin-Flip Process of Polarons in Conjugated Polymers with Magnetic Impurities

Being driven by an external electric field a polaron carrying both spin 1/2 and charge ±e moves at a constant speed in a polymer chain. When the polaron passes through a specific site, which couples to a magnetic impurity via spin-exchange interactions, its spin undergoes a spin-flip process if it is antiparallel to the impurity spin. Our numerical simulation shows that （a） a swap-like operation is performed between the polaron and impurity during the scattering process （b） polarons might be good candidates to be information carriers in the molecular scale.     

Nanoscale Thermal Response in ZnO Varistors by Atomic Force Microscopy

We report the application of customer-built scanning thermal microscopy （SThM） based on a commercial atomic force microscope to investigate local thermal inhomogeneity of ZnO varistors. The so-called 3ω method, generally used for measuring macroscale thermal conductivity, is set up and integrated with an atomic force microscope to probe the nanoseale thermal property. Remarkably, thermal contrasts of ZnO varistors are firstly imaged by the SThM, indicating the uniform distribution of spinel phases at triple points. The frequency-dependent thermal signal of ZnO varistors is also studied to present quantitative evaluation of local thermal conductivity of the sample.     

基于多孔介质燃烧的小型推进器实验研究

多孔介质具有良好的蓄热、传热性能,多孔介质燃烧可以有效地降低系统的热损失,提高尺度燃烧的稳定性.本文在一个内径2 am、长2 cm的圆柱形腔体里组织多孔介质燃烧,测量了点火和稳定燃烧的当量比范围,腔体和出口温度等参数;将燃烧室与小喷管结构相结合,获得了稳定的微推力.     

电动效应作用下微通道内粒子运动的数值模拟

本文采用有限体积法数值模拟了轴向方波电场和直流电场作用下,具有不同电泳淌度粒子的运动情况.结果表明,在半个方波电场周期内,具有不同电泳淌度的粒子在相同的时间内达到各自的稳定速度,周期变化的方波电场使微粒子在微通道内做往复的运动;在直流电场作用下,两个不同电泳淌度的粒子会在轴向方向上产生位移差.定义从溶液中分离粒子的最短距离与微通道高度的比值为分离效率,数值模拟结果表明,分离效率随横向电场强度和粒子电泳淌度的增加而减小.     

直肠癌及直肠正常组织的IR和1H及31P NMR谱研究

对12例直肠组织的红外光谱图进行了测定,并对6例直肠癌变及正常组织的固体1H和31P NMR谱与另外6例直肠癌变及正常组织的液体1H和31P-NMR谱进行研究.结果表明,(1)直肠癌变和正常组织的红外光谱中存在明显差异.(2)在固体1H和31P NMR谱中,1H NMR谱上癌组织的脂肪酸与水相关的特征峰面积的比值I(5+6+7)/I(1+2+3+4)明显变低,依据I(5+6+7)/I(1+2+3+4)比值可区分癌变与正常组织.31P NMR谱上,癌变组织的最强峰的化学位移明显向高场偏移.(3)在液体1H和31P NMR谱中,1H NMR谱上癌组织中3.20处峰强较正常组织高,表明与癌变密切相关的胆碱类化合物包括游离的胆碱、磷酸胆碱及甘油磷酸胆碱等的量增大.31P NMR谱上,癌变组织的强度最大峰的化学位移分别为1.18,1.26,1.29,1.37,正常组织的化学位移为1.70和2.18,癌变组织的强度最大峰的化学位移明显向高场偏移.通过癌变与正常组织代谢物1H NMR谱峰强度和1P NMR谱峰化学位移的差异,可以区分直肠癌变和正常组织,核磁共振1H和31P NMR谱技术可能发展成为一种诊断直肠癌的新方法.     

Hg2CuTi型Mn2NiGe合金的电子结构、磁性对压力、四方变形的响应

运用基于密度泛函理论的第一性原理方法,研究了Hg2CuTi型 Mn2NiGe合金的电子结构对外加压力的响应以及Mn2NiGe的电子结构、磁性对四方变形的响应．结果表明：i）随着外加压力的增加,因Ni、Mn原子间距的减小而导致杂化程度的增强,使得态密度整体向低能区域移动,同时,态密度幅度整体略有减小;ii）在由奥氏体相到马氏体相的变形中,同样因Ni、Mn原子间距的减小而导致杂化程度的增强,占据态的态密度向低能区域移动,体系的能量降低,同时,成键态向低能方向移动,反键态向高能方向移动,能带变宽,成键作用加强,最终导致在马氏体相中的稳定性增大;iii）在四方变形过程中,Mn2NiGe总磁矩的变化主要由Ni原子磁矩的变化所产生．     

Monte Carlo simulation of glandular dose in a dedicated breast CT system

A dedicated breast CT system (DBCT) is a new method for breast cancer detection proposed in recent years. In this paper, the glandular dose in the DBCT is simulated using the Monte Carlo method. The phantom shape is half ellipsoid, and a series of phantoms with different sizes, shapes and compositions were constructed. In order to optimize the spectra, monoenergy X-ray beams of 5-80 keV were used in simulation. The dose distribution of a breast phantom was studied: a higher energy beam generated more uniform distribution, and the outer parts got more dose than the inner parts. For polyenergtic spectra, four spectra of Al filters with different thicknesses were simulated, and the polyenergtic glandular dose was calculated as a spectral weighted combination of the monoenergetic dose.     

集成成像三维显示系统显示性能的研究进展

集成成像三维显示技术是利用透镜阵列获取和显示立体图像的一种三维显示技术。本文首先综述了集成成像三维显示系统的特点,考虑其系统性能主要受分辨率、景深和观看视场角的限制,对近年来集成成像三维显示系统在增大分辨率、景深和观看视场角方面的研究进展做了综合论述,比较分析了各种改进方法的优劣。最后,对我国集成成像三维显示技术的研究现状进行了总结,并简述了本研究小组在该领域取得的若干研究成果。     

圆形射流湍流场的大涡模拟研究

使用发展的大涡模拟并行程序,数值模拟了圆形射流湍流场,与实验值进行详细比较,对大涡模拟程序进行检验,并分析网格尺度对计算结果的影响。结果表明,大涡模拟计算的平均速度场和雷诺应力场与实验值符合得非常好,验证了该大涡模拟计算程序的可靠性和精确度。同时发现一阶统计矩受网格尺度影响不大,二阶及高阶矩与网格尺度有较大的关系,因此使用大涡模拟方法计算湍流及湍流燃烧问题应对网格依赖性进行必要分析,至少保证二阶统计矩具有较好的精度。