Determination of endocrine disruptors in environmental waters using poly(acrylamide-vinylpyridine) monolithic capillary for in-tube solid-phase microextraction coupled to high-performance liquid chromatography with fluorescence detection

A method for the determination of endocrine disruptors, bisphenol A and 17alpha-ethinylestradiol, in environmental water samples was developed using in-tube solid-phase microextraction followed by liquid chromatography and fluorescence detection. A poly(acrylamide-vinylpyridine) monolithic capillary column was applied as the extraction media in view of its greater phase ratio than open-tubular capillaries and thus higher extraction efficiency. After optimizing the extraction conditions, bisphenol A and 17alpha-ethinylestradiol were extracted directly from water samples in a wide dynamic linear range of 0.5-1000 ng mL(-1), with the detection limits obtained as 0.064 and 0.12 ng mL(-1), respectively. The precision of the method was satisfactory with the intraday and interday RSD values smaller than 7.2%. Environmental water samples of different sources were successfully analyzed with the presented method and the monolithic capillary was proved to be robust and reusable in analyzing real water samples.     

In Situ Fabrication of ZnS Semiconductor Nanoparticles in Layered Organic-inorganic Solid Template

Ordered ZnS semiconductor nanoparticles were in situ synthesized in metal halide perovskite organic/inorganic layered hybrids (CnH2n 1NH3)2ZnCl4 (n=10 and 12) by reaction of their spin-casting films with H2S gas. Transmission electron microscopy, UV-vis spectroscopy and small-angle X-ray diffraction were used to characterize the morphology and the structure of formed nanoparticles. Obtained results indicate an effective way to incorporate functional inorganic nanoparticles into structured organic matrices.     

Low-dimensional hybrid copper halides with novel D6R Cu(6)I(6) cores

Two low-dimensional hybrid copper halides, (2,2'-bipy)Cu(3)I(3) (1) and (2,2'-bipy)Cu(4)I(4) (2) (2,2'-bipy = 2,2'-bipyridine), with novel D6R (double six-membered rings) Cu(6)I(6) cores were synthesized by hydro(solvo)thermal reactions and characterized by single-crystal X-ray diffraction.     

2-巯基噻唑[5，4-d]并嘧啶类化合物及其衍生物的合成

由邻硝基氯代嘧啶（3）为原料料，与多硫化钠和二硫化碳共煮，经一步反应 获得了2-巯基噻唑[5，4-d]并嘧啶（4）。由4出发，合成了一系列2位取代的衍生 物5，4和5的结构均通过了~1H NMR及元素分析确让。并对少数化合物的生物活性进 行了测试。     

Radiation polymerization of thermo-sensitive poly (N-vinylcaprolactam)

Temperature-sensitive poly (N-vinylcaprolactam) both in water-soluble state and in gel was prepared by γ-radiation polymerization. The effects of radiation dose, radiation dose rate and monomer concentration on polymerization and the low critical solution temperature characteristics of the polymer were studied. The results show that the polymer prepared within certain radiation dose (beyond 2 kGy) and dose rate range (2–14 Gy/min) has good temperature sensitivity and uniformity.     

高效液相色谱-串联质谱法结合多糖衍生物手性固定相拆分氰戊菊酯

建立了以多糖衍生物为手性固定相的高效液相色谱-串联质谱(HPLC-MS/MS)直接拆分氰戊菊酯对映体的方法。在反相液相色谱条件下,考察了手性固定相的种类、流动相组成、柱温、流速对氰戊菊酯4个立体异构体分离的影响。同时,利用热力学方法对氰戊菊酯的立体异构体与固定相之间的色谱保留和分离的热力学机理进行了探讨。结果表明:采用Lux Cellulose-3(纤维素-三(4-甲基苯甲酸酯))手性色谱柱,在以流动相为乙腈-水(5 mmol/L甲酸铵)=(55:45,V:V)流速0.4 mL/min,柱温30℃的条件下,可在14 mins内实现氰戊菊酯4个立体异构体的基线分离。拓展了HPLC-MS/MS在菊酯类手性农药对映体分离及检测上的应用。     

添加剂对SiO电性能的影响及其机理分析

SiO_x/CoO and SiO/Li₂CO₃ composite materials were prepared by mechanical ball-milling. The structures of the obtained materials were characterized by X-ray diffraction (XRD). And scanning electron microscopes (SEM) of three samples after 20 cycles were also given. In addition， the electrochemical performances of three materials with galvanostatic charge-discharge cycling were investigated. The results show that the composite samples have larger initial reversible capacities and better cycle performance than pure SiO. Also，a schematic diagram showing the buffer effects of Li₂CO₃ addition and the mechanism of improving electrochemical performance by adding Li₂CO₃ are suggested.     

牛血清白蛋白与十二烷基硫酸钠作用的机理

利用电动势法得到了牛血清白蛋白(BSA)与十二烷基硫酸钠(SDS)相互作用的结合等温线. 通过四阶导数紫外光谱法和荧光光谱法研究了相互作用过程中芳香族氨基酸残基微环境极性的变化. 通过研究发现, 随着SDS浓度的逐渐增大, SDS在BSA上的平均结合数(v)逐渐增大, 色氨酸(Trp)残基所处微环境的极性在减弱后保持基本不变, 酪氨酸残基所处微环境的极性在明显增强后稍有减弱, 苯丙氨酸残基所处微环境的极性略有增强. 结果表明, 当v由0增大到14时, SDS主要结合在BSA的Trp-213附近并逐渐形成聚集体, 从而诱导BSA由结构域ⅡA 开始逐渐展开. 此后, SDS呈正协同作用的特点与BSA 结合, v急剧增大. 当v约为302 时, SDS在BSA上的结合基本达到饱和, BSA的构象趋于稳定.     

三氮宾分子的磁性设计

采用量子化学ＧＡＵＳＳＩＡＮ９４ａｂｉｎｉｔｉｏＵＨＦ方法和ＳＴＯ－３Ｇ基组设计一系列三氮宾分子，讨论分子的几何结构和取代基对其磁性的影响，计算结果表明，这些分子都具有铁磁性并有高自旋基态，有效交换积分值随代基的变化而变化，其中一种具有较代的总能量和高的有效交换积分值的分子，可期望被合成。     

HRP-12催化剂上苯与直链烯烃的烷基化反应 Ⅰ. 本征反应动力学研究

直链烷基苯是生产阴离子表面活性剂直链烷基苯磺酸盐的重要原料。2000年以美国环球油品公司(UOP)的脱氢法工艺生产的直链烷基苯占世界直链烷基苯产量的88％。脱氢法以液体氢氟酸为催化剂由正构烯烃与苯进行烷基化反应生产直链烷基苯。由于液体氢氟酸催化剂具有较强的腐蚀