Electroluminescence of a Multi-Layered Organic Light-Emitting Diode Utilizing Trans-4-[p-[N-methyl-N-(hydroxymethyl)amino]styryl]-N-Methylphridinium Tetraphenylborate as the Active Layer

Employing an organic dye salt of trans-4-[p-[N-methyl-N-(hydroxymethyl)amino]styryl]-N-methylphridinium tetra\-phenylborate (ASPT) as the active layer, 8-hydrocyquinoline aluminium (Alq₃) as the electron transporting layer and N,N’-diphenyl-N,N’-bis(3-methylphenyl)-[1,1’-biphenyl]-4,4’-diamine (TPD) as the hole transporting layer, respectively, we fabricate a multi-layered organic light-emitting diode and observe the colour tunable electroluminescence (EL). The dependence of the EL spectra on the applied voltage is investigated in detail, and the recombination mechanism is discussed by considering the variation of the hole-electron recombination region.     

Double-Humped Transverse Density Profile in Two-Dimensional Chute Flow with Rough Sidewalls

We study a two-dimensional granular rapid flow with rough sidewalls stuck with the same size discs by molecular dynamics simulation. A transient state of the double-humped density profile in the flowing process has been found, which appears and moves as travelling wave and is the same as the phenomena in the recent experiments [Acta Phys. Sin. 53 （2004） 3389 （in Chinese）]. Our simulation shows that the rough sidewalls play an important role in the converting momentum of boundary discs from the vertical direction to the horizontal one through particle collisions to form this profile and the good elasticity of discs ensures this effect. The appearance of the double-humped profile may be a precursor, which determines if the whole flow will be far repulsed from the boundary and become dilute eventually.     

高抗冲聚丙烯序列结构的综合表征

用高分辨＾１３Ｃ ＮＭＲ、ＦＴＩＲ等手段获得了高抗冲聚丙烯的组成和序列分布等链结构方面的信息。用ＤＳＣ、ＷＡＸＤ等方法研究了它们的结晶行为、熔融转变及晶体结构，多种方法相结合有效地表征了高抗冲聚丙烯的序列结构。     

Ce偶-偶同位素低激发态性质的IBM2描述

通过考虑同类核子相干对间的四极相互作用，在IBM2中对Ce偶－偶同位素^128Ce-^138Ce的低激发态能谱和E2跃迁几率及分支比进行了理论分析，计算结果有效地改善了IBM中这些核的γ带能谱的Staggering现象描述，与实验观察到的低激发态结果基本一致。     

紧矩阵量子群G的余表示与其对偶量子群(A)的关系

设 G=（A,△）为紧矩阵量子群,G为A的所有有限维光滑的、不可约余表示等价类的集合.本文通过（A,△）的一个余表示Vo构造了两个相互配对的集合,利用Hilbert C＊-模的理论证明它们分别为A和Baaj与Skandalis构造的量子群A,并且证明了对任意的α∈G,在A中都对应一个有限维投影算子Pα,满足 dim（α）=dim（pα）.     

Chromatic Uniqueness of the Complement of T_m(l, 4, m - 6)

In the paper, we prove that the complement of Tm(1,4,m - 6)(m > 10) is chromatically unique if and only if m ≠5k(k ≥ 2).     

线性加指数效用函数的组合投资研究

应用无差异曲线法较好地解决了在投资决策分析中具有特殊重要地位的线性加指数效用函数的最优组合投资比例的求解问题,并给出实例予以说明.     

一类非线性抛物方程弱解的L~2 衰减(英文)

本文研究了非线性抛物方程弱解的L2 衰减 ,证明了若u是非线性抛物方程的一个弱解 ,则u满足‖u‖L2 ≤C( 1 t) -n/ 4,其中C是常数且仅依赖于初始值u0 的范数 .     

利用电泳技术在不锈钢和铁基底上制备MgB2带材

本文首次报道了利用电泳技术在铁和不锈钢基底上制备MgB2超导带材.电阻测量表明,沉积在铁和不锈钢基底上MgB2带材的超导零电阻转变温度分别为37.5K和31K,超导转变宽度分别为0.3K和1K.磁测量表明,(5K,OT)时不锈钢基底上带材的临界电流密度为6×105(A/cm2).X射线衍射谱和扫描电子显微镜图象表明样品结晶良好,晶粒生长致密.本工艺制备MgB2带材时不受系统真空度的限制,生长迅速,成本低廉,并且可以根据不同的需要任意选择基底的形状和大小.     

三组元乳化液雾化特性的研究

采用Malvern粒度仪对柴油、甲醇和水三组元乳化液的雾化特性进行了研究。实验发现:对于压力雾化喷嘴来说,本文所涉及的乳化液由于粘度高于纯柴油,因此雾化效果比纯柴油差,而且喷射压力、乳化剂的粘度和乳化液的组份对乳化液的雾化特性具有显著的影响。随着喷射压力的升高,乳化液喷雾粒径将随之减小;若乳化液中柴油的含量(柴油不少于50％)降低,乳化液的雾化粒径将随之增加;若采用高粘度的乳化剂,相应乳化液喷雾的粒径也大。