《光谱学与光谱分析》2007年征订启事

The authors achieved the temporal coherent control in an Er^3＋ doped telluride glass, one kind of disordered solids. The upconversion at 670 nm was modulated and the dephasing time was simulated as 300 fs. Moreover, the photon echo signal gave the dephasing time due to the phonon interaction. The agreement between the two data indicates that the interaction between the wavepacket and the phonon leads to the fast disappearance of wavepackets interference, which is helpful for the tech- nique to be applied to the disordered solids.     

The Calibrating Theory in the Network Parameters Measurement of Microwave and MMW Devices

The paper introduces a special system calibration technology in s-parameters measurement of microwave and millimeter wave devices. The 8-term errors module is built by analyzing the signals flowing in the measurement system. Then the calibration technology using non-standard kits is designed on the base. Finally, the experiment using the calibration technology is introduced.     

Nanostructured thermoset epoxy resin templated by an amphiphilic poly(ethylene oxide)‐block‐poly(dimethylsiloxane) diblock copolymer

An amphiphilic poly(ethylene oxide)‐block‐poly(dimethylsiloxane) (PEO–PDMS) diblock copolymer was used to template a bisphenol A type epoxy resin (ER); nanostructured thermoset blends of ER and PEO–PDMS were prepared with 4,4′‐methylenedianiline (MDA) as the curing agent. The phase behavior, crystallization, hydrogen‐bonding interactions, and nanoscale structures were investigated with differential scanning calorimetry, Fourier transform infrared spectroscopy, transmission electron microscopy, and small‐angle X‐ray scattering. The uncured ER was miscible with the poly(ethylene oxide) block of PEO–PDMS, and the uncured blends were not macroscopically phase‐separated. Macroscopic phase separation took place in the MDA‐cured ER/PEO–PDMS blends containing 60–80 wt % PEO–PDMS diblock copolymer. However, the composition‐dependent nanostructures were formed in the cured blends with 10–50 wt % PEO–PDMS, which did not show macroscopic phase separation. The poly(dimethylsiloxane) microdomains with sizes of 10–20 nm were dispersed in a continuous ER‐rich phase; the average distance between the neighboring microdomains was in the range of 20–50 nm. The miscibility between the cured ER and the poly(ethylene oxide) block of PEO–PDMS was ascribed to the favorable hydrogen‐bonding interaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3042–3052, 2006     

合肥光源高亮度模式Lattice设计

介绍了一组合肥光源新高亮度模式的Lattice. 新的设计维持了储存环上所有元件和光束线位置不变,也没有加入新的元件. 取得了较低发射度. 所有直线节处的垂直方向β函数值都很小，适合插入件的运行. 跟踪计算表明新Lattice具有足够大的动力学孔径用于注入和储存粒子.     

一类广义Schrdinger算子的自伴性与本质谱

本文在一类 Ｌｐ位势Ｖ（ｘ）下建立了广义Ｓｃｈｒｏｄｉｎｇｅｒ算子Ｈ＝（－Δ）ｍ＋Ｖ（ｘ）在Ｃ∞０（Ｒｎ）上的本质自伴性，给出了Ｈ的本质谱的分布．     

Banach空间中优化问题的最优性条件

首先在Contingent切锥意义下界定了Banach空间中非空集合的伪切锥和伪凸性的概念，并讨论了相应的性质，然后针对可微优化问题，在广义凸性假设下，建立了最优性条件。     

Q过程的不变分布(Ⅱ)

设E为一个可数集,Q=（qi,j;i,j∈E）为E×E上的矩阵,满足m为E上的概率分布满足何时存在Q过程,使得m是它的不变分布? 这个问题由Williams（1979）作为一个开问题提出.文[15]对全稳定情形,解决了这个问题;本文对单瞬时情形,完整地解决了该问题.     

基于模糊集相容性的模糊控制规则优化方法

在简要介绍模糊模型的完备性和相容性的基础上 ,根据模糊集贴近度 ,提出模糊集相容性的概念 ;通过对模糊控制规则表特征的分析 ,进一步完善规则相容性概念及其定量评价方法 ;最后给出模糊控制规则模型自寻优优化方法。仿真结果表明 ,该方法可以大大提高控制系统的控制性能。     

用变形全息透镜实现变形分数傅里叶变换

利用一发散点光源和一束倾斜平行光制作出在两个垂直方向上具有不同焦距的变形全息透镜,且用此全息元件实现了变形分数傅里叶变换。变形全息透镜两个方向上的焦距随全息记录条件和再现条件而变化,分析了用这种全息透镜实现变形分数傅里叶变换的条件。实验表明,用该元件能够方便地实现任意级次的变形分数傅里叶变换。     

高Z等离子体中的双电子复合与电子碰撞激发

 采用准相对论性Hartree-Fock-Relativistic方法与不可分辨跃迁组模型相结合，对Au和Ta元素的类Ni离子的双电子复合速率，以及Au元素类Cu离子的电子碰撞激发速率进行了计算。计算结果表明，对于Au类Ni离子的3d¹⁰-3d⁹4l5f-3d¹⁰4l双电子复合过程以及类Cu离子的3d¹⁰4l-3d⁹4l5f电子碰撞激发过程，当电子温度高于1.0 keV时，电子离子碰撞激发速率随电子温度增加而增加，双电子复合速率随电子温度增加而减小，并且电子碰撞激发对谱线辐射的贡献要比双电子复合大得多。