塑料光纤拉丝塔控制系统设计

为减小塑料光纤纤芯直径波动造成的非固有散射损耗,设计了一种新型光纤拉丝塔控制系统,详细阐述了其工作原理及软硬件实现过程。采用单片机作为核心处理部件,合理设计传感器测温电路、加热炉温度控制电路、直径测量和控制电路以及友好的人机界面。实验表明系统拉丝芯径范围宽(0.2～3mm),拉制光纤直径均匀,精度可控制在15μm以内。整个系统成本低,实用价值高,满足塑料光纤实验室研究需要,可供实际生产参考。     

Engineering Double-Walled Carbon Nanotubes by Ar Plasma

Double-walled carbon nanotubes （DWCNTs） have been found to be promising nano-materials for nano-mechanical and nano-electrical devices due to their double-walled structures. Modifying DWCNTs would be one of the key technologies for device construction. We demonstrate engineering the geometry of DWCNTs by etching with Ar plasma. The characterization by atomic force rnicroscopy indicates that single atomic carbon layers could be removed from DWCNTs by Ar plasma. The etching effect is further investigated by electrical measurements on DWCNT field-effect transistors, which allow us to study the interwall screen effect as well.     

二氧化锰纳米束超级电容器电极材料制备及分析

由聚苯胺捆绑二氧化锰纳米束作为超级电容器的电极材料,具有良好的赝电容特性。聚苯胺良好的导电性影响二氧化锰纳米束的电化学性能,使其阻抗变小,稳定性增强。     

一维辐射系统吸收系数的反问题

辐射反问题是当前的研究热点之一。本文采用离散坐标法求解正问题,用共轭梯度法求解一维系统吸收系数的反问题。用正问题的计算结果加上误差作为反问题的求解条件。数值计算的结果表明,共轭梯度法可以比较好的反演辐射系统的吸收系数。在考虑散射时,反演效果比不考虑散射的反演效果好。     

谱峰相对强度比法在碳炔含量测定中应用

碳炔材料是一种不溶不熔高聚物 ,红外谱图是最简易的一种分析测试工具。将 C—H键的振动峰面积与 C C键的振动峰面积相关联 ,用谱峰相对强度比法测定不同制备条件下产生的碳炔材料的相对含量。结果表明 ,两者比值对反应物浓度的变化具有相关性 ,可用作碳炔材料制备中实验条件的优选手段。     

Rogue Wave Solutions for Nonlinear Schrödinger Equation with Variable Coefficients in Nonlinear Optical Systems

In this paper, the generalized Darboux transformation is constructed to variable coefficient nonlinear Schrödinger (NLS) equation. The N-th order rogue wave solution of this variable coefficient NLS equation is obtained by determinant expression form. In particular, we present rogue waves from first to third-order through some figures and analyze their dynamics.     

Matlab在光学信息处理仿真实验中的应用

提出了一种利用计算机并通过Matlab软件仿真光学信息处理实验的方法 ,其特点是可以随意改变物理参量 ,克服了光学实验上难以实现的操作 .文中分别给出了光栅衍射、空间滤波、图像边缘增强、相关识别等实验的部分仿真结果 .     

传输线中脉冲信号反射波的测量和应用

将高频单脉冲信号输入同轴电缆，借助数字存储示波器记录输入、输出端的波形和相对延时，可以测量传输线的电缆长度和衰减系数，同时观察脉冲波形因色散引起的畸变．     

提高生物大分子NMR分辨率和灵敏度的有效方法：TROSY和CRINEPT

随着NMR谱仪和实验技术的发展,以及²H、¹⁵N、¹³C标记技术的发展和完善,先后出现了多种异核多维和多共振脉冲实验方法,测定分子量不大于30 kDa的蛋白质的溶液三维结构不再是困难的事. 但是,对于分子量大于30 kDa的蛋白质,由于共振峰数目的增多和谱线增宽,其结构测定依然很困难. 虽然提高磁场强度能够提高分辨率和灵敏度,但是,800 MHz以上的NMR谱仪造价昂贵,难以普及,促使NMR工作者不断寻求能够提高分辨率和灵敏度的新的脉冲实验方法. 到目前为止,比较成功的方法是TROSY^[1]和CRINEPT^[2], 以及在此基础上发展的新方法. 文中对TROSY和CRINEPT的基本原理、最新发展,以及它们在蛋白质结构测定和分子间相互作用研究等方面的广泛应用做了综述.      

STUDY OF OPTICAL PUMPING OF ALKALI ATOMIC BEAM IN STRONG MAGNETIC FIELDS

We have gained a very comprehensive set of results for infrared diffraction (10.6μm wavelength) from fabricated single grooves of reflection with widths in the range of 5μm to 65μm. The experimental results show that the diffraction can still occur when the groove width becomes comparable to or less than the wavelength of the probing light. Variations of the diffraction intensities have a very regular sinusoidal relationship with the polarization angle of the incident light; and the diffraction intensities are the when the incident light is TM polarized. However, the diffraction intensities will be a minimum when the incident light is TE polarized; and the biger the diffraction angle, the higher the rate of change of the diffractive intensity with increasing polarization angle of the incident light.