Disturbing effect of CaCl2 used for drying in the measurement of 226Ra in water

A frequently used method in determining the radium concentration of water is the radon emanation method. When radon gas is transferred to the Lucas-cell usually CaCl₂ is used to remove the water traces. When we measured the background of the system using ultra clear distilled water the results were astonishing. The detailed investigation has shown that the unwanted radon originated from the CaCl₂, contained about 1000 Bq/kg of ²²⁶Ra. Depending on the time interval between two measurement, the radon deriving from the CaCl₂ disturbed the measurements.     

High performance ion chromatography of haloacetic acids on macrocyclic cryptand anion exchanger

A new high performance ion chromatographic method has been developed for the separation of the nine chlorinated-brominated haloacetic acids (HAAs) that are the disinfection by-products of chlorination of drinking water, using a macrocycle-based adjustable-capacity anion-exchange separator column (IonPac Cryptand A1). A gradient method based on theoretical and experimental considerations has been optimized in which 10 mM NaOH-LiOH step gradient was performed at the third minute of the analysis. The optimized method allowed us to separate the nine HAAs and seven possibly interfering inorganic anions in less than 25 min with acceptable resolution. The minimum concentrations detectable for HAAs were between 8.0 (MBA) and 210 (TBA) microg L(-1), with linearity included between 0.9947 (TBA) and 0.9998 (MBA). To increase sensitivity, a 25-fold preconcentration step on a reversed phase substrate (LiChrolut EN) has been coupled. Application of this method to the analysis of haloacetic acids in real tap water samples is illustrated.     

Diffusion of cationic polyelectrolytes into cellulosic fibers

The penetration of cationic polyelectrolytes into anionic cellulosic fibers was evaluated with fluorescent imaging techniques in order to clarify the mechanism and time scales for the diffusion process. The bulk charge of the cellulosic fibers indirectly creates a driving force for diffusion into the porous fiber wall, which is entropic in nature due to a release of counterions as the polyelectrolyte adsorbs. The individual bulk charges in the fiber cell wall also interact with the diffusing polyelectrolyte, such that the polyelectrolyte diffuses to the first available charge and consequently adsorbs and remains fixed. Thus, subsequent polyelectrolyte chains must first diffuse through the adsorbed polyelectrolyte layer before adsorbing to the next available bulk charges. This behavior differs from earlier suggested diffusion mechanisms, by which polyelectrolytes were assumed to first adsorb to the outermost surface and then reptate into the pore structure. The time scales for polyelectrolyte diffusion were highly dependent on the flexibility of the chain, which was estimated from calculations of the persistence length. The persistence length ultimately depended on the charge density and electrolyte concentration. The charge density of the polyelectrolyte had a greater influence on the time scales for diffusion. High charge density polyelectrolytes were observed to diffuse on a time scale of months, whereas the diffusion of low charge density polyelectrolytes was measured on the order of hours. An influence of the chain length, that is, steric interactions due the persistence length of the polyelectrolyte and to the tortuosity of the porous structure of the fiber wall, could only be noted for low charge density polyelectrolytes. Increasing the electrolyte concentration increased the chain flexibility by screening the electrostatic contribution to the persistence length, in turn inducing a faster diffusion process. However, a significant change in the diffusion behavior was observed at high electrolyte concentrations, at which the interaction between the polyelectrolyte charges and the fiber charges was almost completely screened.     

Autoignition temperature: comprehensive data analysis and predictive models

ABSTRACT

Here we report a new predictive model for autoignition temperature (AIT), an important physical parameter widely used to assess potential safety hazards of combustible materials. Available structure-AIT data extracted from different sources were critically analysed. Support vector regression (SVR) models on different data subsets were built in order to identify a reliable compound set on which a realistic model could be built. This led to a selection of the dataset containing 875 compounds annotated with AIT values. The thereupon-based SVR model performs reasonably well in cross-validation with the determination coefficient r ² = 0.77 and mean absolute error MAE = 37.8°C. External validation on 20 industrial compounds missing in the training set confirmed its good predictive power (MAE = 28.7°C).     

Complete family of mono-, bi-, and trinuclear Re(I)(CO)3Cl complexes of the bridging polypyridyl ligand 2,3,8,9,14,15-hexamethyl-5,6,11,12,17,18-hexaazatrinapthalene: syn/anti isomer separation, characterization, and photophysics

The syn and anti isomers of the bi- and trinuclear Re(CO)(3)Cl complexes of 2,3,8,9,14,15-hexamethyl-5,6,11,12,17,18-hexaazatrinapthalene (HATN-Me(6)) are reported. The isomers are characterized by (1)H NMR spectroscopy and X-ray crystallography. The formation of the binuclear complex from the reaction of HATN-Me(6) with 2 equiv of Re(CO)(5)Cl in chloroform results in a 1:1 ratio of the syn and anti isomers. However, synthesis of the trinuclear complex from the reaction of HATN-Me(6) with 3 equiv of Re(CO)(5)Cl in chloroform produces only the anti isomer. syn-{(Re(CO)(3)Cl)(3)(μ-HATN-Me(6))} can be synthesized by reacting 1 equiv of Re(CO)(5)Cl with syn-{(Re(CO)(3)Cl)(2)(μ-HATN-Me(6))} in refluxing toluene. The product is isolated by subsequent chromatography. The X-ray crystal structures of syn-{(Re(CO)(3)Cl)(2)(μ-HATN-Me(6))} and anti-{(Re(CO)(3)Cl)(3)(μ-HATN-Me(6))} are presented both showing severe distortions of the HATN ligand unit and intermolecular π stacking. The complexes show intense absorptions in the visible region, comprising strong π → π* and metal-to-ligand charge-transfer (MLCT) transitions, which are modeled using time-dependent density functional theory (TD-DFT). The energy of the MLCT absorption decreases from mono- to bi- to trinuclear complexes. The first reduction potentials of the complexes become more positive upon binding of subsequent Re(CO)(3)Cl fragments, consistent with changes in the energy of the MLCT bands and lowering of the energy of relevant lowest unoccupied molecular orbitals, and this is supported by TD-DFT. The nature of the excited states of all of the complexes is also studied using both resonance Raman and picosecond time-resolved IR spectroscopy, where it is shown that MLCT excitation results in the oxidation of one rhenium center. The patterns of the shifts in the carbonyl bands upon excitation reveal that the MLCT state is localized on one rhenium center on the IR time scale.     

Fragment-based drug design: computational & experimental state of the art

Fragment-based screening is an emerging technology which is used as an alternative to high-throughput screening (HTS), and often in parallel. Fragment screening focuses on very small compounds. Because of their small size and simplicity, fragments exhibit a low to medium binding affinity (mM to μM) and must therefore be screened at high concentration in order to detect binding events. Since some issues are associated with high-concentration screening in biochemical assays, biophysical methods are generally employed in fragment screening campaigns. Moreover, these techniques are very sensitive and some of them can give precise information about the binding mode of fragments, which facilitates the mandatory hit-to-lead optimization. One of the main advantages of fragment-based screening is that fragment hits generally exhibit a strong binding with respect to their size, and their subsequent optimization should lead to compounds with better pharmacokinetic properties compared to molecules evolved from HTS hits. In other words, fragments are interesting starting points for drug discovery projects. Besides, the chemical space of low-complexity compounds is very limited in comparison to that of drug-like molecules, and thus easier to explore with a screening library of limited size. Furthermore, the "combinatorial explosion" effect ensures that the resulting combinations of interlinked binding fragments may cover a significant part of "drug-like" chemical space. In parallel to experimental screening, virtual screening techniques, dedicated to fragments or wider compounds, are gaining momentum in order to further reduce the number of compounds to test. This article is a review of the latest news in both experimental and in silico virtual screening in the fragment-based discovery field. Given the specificity of this journal, special attention will be given to fragment library design.     

Kinetics and mechanism of the oxidation of sulfite by chlorine dioxide in a slightly acidic medium

The sulfite-chlorine dioxide reaction was studied by stopped-flow method at I = 0.5 M and at 25.0 +/- 0.1 degrees C in a slightly acidic medium. The stoichiometry was found to be 2 SO(3)(2-) + 2.ClO(2) + H(2)O --> 2SO(4)(2) (-) + Cl(-) + ClO(3)(-) + 2H(+) in *ClO(2) excess and 6SO(3)(2-) + 2*ClO(2) --> S(2)O(6)(2-) + 4SO(4)(2-) + 2Cl(-) in total sulfite excess ([S(IV)] = [H(2)SO(3)] + [HSO(3)(-)] + [SO(3)(2-)]). A nine-step model with four fitted kinetic parameters is suggested in which the proposed adduct *SO(3)ClO(2)(2-) plays a significant role. The pH-dependence of the kinetic traces indicates that SO(3)(2-) reacts much faster with *ClO(2) than HSO(3)(-) does.     

Stability and local bifurcation analyses of two-wheeled trailers considering the nonlinear coupling between lateral and vertical motions

Nonlinear Dynamics - Multistability is an area of interest in robotics and locomotion because the ability to achieve multiple configurations or generate multiple gaits allows a single robotic or...