多项式理想准素分解的算法

讨论了多项式理想准素分解的算法,对于理想坐标变换中关键的“一般位置”的计算,给出了一个确定算法,并建立了特别规范Groebner基的概念,利用这一概念及文中提供的相应算法,可以方便地计算理想的维数,进而使用降维的方法来得到高维理想的准素分解。     

超声波在废橡胶再生中应用的最新进展

全世界每年产生大量废旧橡胶，它们需要很长时间才能降解，这既污染环境，又浪费资源，解决此问题的唯一方法是再生利用。在众多再生方法中，新近出现的超声波脱硫再生法，被认为是最有希望的方法，本文详细地介绍了这方面的最新进展情况。     

巯基乙酸锑配合物的合成与X射线粉末衍射数据指标化

一些锑和铋的配合物可以应用于医药研究[1,2 ] ,已合成了许多锑的有机配体配合物[3～ 7] ,但其中大多数没有生物活性。因此 ,研究锑或铋离子的配合物不仅对主族元素化学、生物无机化学而且对医药都有着非常重要的意义。我们用三氯化锑与巯基乙酸液相反应法合成的二巯基乙酸锑 (Ⅲ)配合物 ,其组成为ＨＳｂ(ＳＣＨ2 ＣＯＯ) 2 ,用Ｘ射线粉末多晶衍射数据指标化来研究配合物晶体结构[8] 。1　实验部分1 1　仪器与试剂ＥＡ - 1 1 0 6型元素分析仪 (意大利卡拉欧巴公司制造 ) ,Ｄ Ｍａｘ -ＹＢ型多晶Ｘ射线粉末衍射仪(日本理学 ,ＣｕＫα射线 ,…     

日本菊花螺Siphonaria Japonia化学成分的研究(I)

近年来相继从菊花螺属(Siphonaria)海洋软体动物中分离出一系列聚丙酸酯(Polypropi-onate)类化合物.这类化合物在自然界罕见,被认为是菊花螺属软体动物的典型代谢产物.本文实验所用的菊花螺采自福建省湄洲湾莲城半岛.该动物味很苦,有清凉解毒之功.     

Syntheses and Structures of Sil abridged Hafnocene Dichlorides

The present paper covers three silabridged hafnocene dichlorides(1, 2 and 3) prepared by sequential reactions of α, ω-dichloropermethyl polysilane with cyclopentadienyl sodium, n-butyl lithium and hafnium tetrachloride. Their structures were characterized by elemental analyses, UV, 1H(13C) NMR and MS. Furthermore the crystal and molecular structures of 1 and 2 were determined by X-ray diffraction method. The crystal of 1 is monoclinic, space group C2/c with a=1. 3401(4), b=0. 9977(3), c = 1. 0922(4) nm; β=94. 07(1)° V=3. 6342 nm3, Z = 2, Dc = 2.155 g·cm-3. The final deviation factor R = 0. 064. The crystal of 2 is monoclinic, space group P21/c with a=0.0847(1), b=1.5181(1), c=2.9824(2) nm; β= 94. 07(1)°? V=3.634 nm3; Dc= l. 805 g·cm-3. The final deviation factor R = 0. 033. The relationship between the silabridged structure and spectral properties is also discussed.     

布尔“复合函数”的Walsh循环谱和自相关函数

本文利用布尔随机变量联合分布的分解式给出了布尔“复合函数”和某布尔函数符合率的分解算式,由此求得了布尔“复合函数”的 Walsh循环谱和自相关函数的计算公式,公式清楚地表明了“复合”所得布尔函数的 Walsh循环谱与起“复合”作用的函数和被“复合”的各函数所有线性组合的 Walsh循环谱之间的关系、“复合”所得布尔函数的自相关函数与起“复合”作用的函数谱和被“复合”的各函数的谱及相关函数之间的关系,这两个公式在布尔函数的密码学性质研究中会有广泛的应用.     

Melt rheology of polylactide/montmorillonite nanocomposites

In this article, the linear and nonlinear shear rheological behaviors of polylactide (PLA)/clay (organophilic‐montmorillonite) nanocomposites (PLACNs) were investigated by an Advanced Rheology Expanded System rheometer. The nanocomposites were prepared by master batch method using a twin‐screw extruder with poly(ε‐caprolactone) (PCL) as a compatibilizer. The presence of org‐MMT leads to obvious pseudo‐solid‐like behaviors of nanocomposite melts. The behaviors caused by the formation of a “percolating network” derived from the reciprocity among the strong related sheet particles. Therefore, the storage moduli, loss moduli, and dynamic viscosities of PLACNs show a monotonic increase with MMT content. Nonterminal behaviors exists in PLACNs nanocomposites. Besides the PLACNs melts show a greater shear thinning tendency than pure PLA melt because of the preferential orientation of the MMT layers. Therefore, PLACNs have higher moduli but better processibility compared with pure PLA. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3189–3196, 2007     

Preparation,thermal properties,and flame retardance of epoxy–silica hybrid resins

A novel epoxy system was developed through the in situ curing of bisphenol A type epoxy and 4,4′‐diaminodiphenylmethane with the sol–gel reaction of a phosphorus‐containing trimethoxysilane (DOPO–GPTMS), which was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) with 3‐glycidoxypropyltrimethoxysilane (GPTMS). The preparation of DOPO–GPTMS was confirmed with Fourier transform infrared, ¹H and ³¹P NMR, and elemental analysis. The resulting organic–inorganic hybrid epoxy resins exhibited a high glass‐transition temperature (167 °C), good thermal stability over 320 °C, and a high limited oxygen index of 28.5. The synergism of phosphorus and silicon on flame retardance was observed. Moreover, the kinetics of the thermal oxidative degradation of the hybrid epoxy resins were studied. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2354–2367, 2003     

Synthesis of MgAl2O4 Spinel Nanometer Powder via Biology Polysaccharide Assisted Sol-Gel Process

A novel and cost-effective sol-gel process for preparation of MgAl₂O₄ spinel nanometer powders has been developed in this study. A solution of magnesium and aluminum nitrates in stoichiometric proportion was successfully embraced in the biology polysaccharide gel network, formed by the synergistic interaction between xanthan gum (XG) and locust bean gum (LBG) utilizing their broad-spectrum stability of salt tolerance and character of transformation from sol to gel on the condition of proper temperature and relative proportion of polymeric components. Dry gel could be obtained by vacuum dehydration of aqueous gel at low temperatures. Monolithic MgAl₂O₄ spinel nanometer powders were produced by calcining the dry gel above 800°C, with average crystallite size of 20 nanometers.