基于RBR和PCA的2.4米风洞故障诊断系统应用研究

为解决2.4米风洞试验装备的故障监测与诊断（FDD）问题,设计了一种基于规则推理（RBR）和主元分析（PCA）的并行故障诊断系统。对试验流程和因果关系较强的单一装备故障,采用RBR诊断方法;而对控制过程和重要传感器的故障,通过构建PCA模型,根据平方预报误差（SPE）实现系统故障的诊断。运行效果表明：该系统实时性好、诊断结果与实际相符合、且对过程故障具有较强的针对性。     

Ce∶YAG透明陶瓷的制备及性能研究

以高纯Al_2O_3、Y_2O_3和CeO_2为原料,采用固相法制备Ce∶YAG(掺铈钇铝石榴石)透明陶瓷,研究了稀土离子掺杂浓度以及烧结温度对陶瓷样品光学性能的影响。结果表明:陶瓷片透过率随着烧结温度的升高而增大,1750℃烧结获得的0.5%Ce∶YAG陶瓷片的透过率高达81.7%。Ce∶YAG陶瓷片的激发峰和发射峰分别位于350nm和530nm处,在白光LED领域具有极大的应用价值。     

Kalman滤波法消除光谱连续背景的研究

本文研究了Ｋａｌｍａｎ滤波法消除光谱连续背景，以电感耦合等离子体原子发射光谱法测量氧化铽中Ｌａ，Ｅｒ，Ｇｄ，Ｄｙ，Ｄｕ和Ｔｍ为例研究了不同背景情况下的结果。用新息序列的平均平方和正交自相关系数超过出信度极限以外数为评价函数，可评价所估计的背景形状，是一种不用测背景，用计算方法消除光谱连续背景的好方法，本方法不仅适用于电感耦合等离子体原子发射光谱，对分光光度，原子等原则上都可适用。     

FTIR法研究氨基酸稀土配合物与磷脂的相互作用

利用傅里叶变换红外光谱（ＦＴＩＲ）法研究了不同类型氨基酸及其配合物与二棕榈酰磷脂酰胆碱脂质体浇铸膜的相互作用。结果表明，在有氨基酸存在下，二棕榈酰磷脂酰胆碱的红外谱图没有明显的变化；氨基酸稀土配合物与磷脂极性头基团有静电相互作用，作用的程度随稀土离子、氨基酸及稀土同氨基酸配比的不同而有所不同。     

Organic Light Emitting Diodes with an Organic Acceptor/Donor Interface Involved in Hole Injection

Organic light emitting diodes with an interface of organic acceptor 3-, 4-, 9-,10-perylenetetracarboxylic dianhydride （PTCDA） and donor copper phthalocyanine （CuPc） involved in hole injection are fabricated. As compared to the conventional device using a 5 nm CuPc hole injection layer, the device using an interface of 10nm PTCDA and 5 nm CuPc layers shows much lower operating voltage with an increase of about 46% in the maximum power efficiency. The enhanced device performance is attributed to the efficient hole generation at the PTCDA/CuPc interface. This study provides a new way of designing hole injection.     

(1,2-μ2-L1)(1,2-μ2-L2)十羰基合三锇振动光谱的理论计算[L1, L2=H, Cl, Br, I]

用密度泛函理论和从头计算(abinitio)方法,在B3LYP CEP 4G ,B3LYP LanL2DZ和RHF CEP 4G ,RHF LanL2DZ水平上,全优化计算了(1,2 μ2 H) (1,2 μ2 L)Os3(CO) 1 0 (L :Cl,Br,I)的分子几何构型和电子结构;在RHF CEP 4G水平上,全优化计算了(1,2 μ2 L) 2 Os3(CO) 1 0 (L :H ,Cl,Br,I)的分子几何构型和电子结构。计算结果表明,在这些体系中,电子由Os(CO) 3向Os(CO) 4转移。用RHF CEP 4G对这七个簇合物进行了简正振动频率分析,在计算得到振动频率及吸收强度的基础上,模拟了稳定平衡结构的红外光谱图,并对计算结果进行了比较和讨论。     

HL-2A装置LHCD天线波谱测量与数值计算

用网络分析仪对HL-2A装置LHCD天线阵列子波导间的相位差,子波导间的相对功率和各主波导的电压驻波比等参数进行了测量。用测量值代入程序计算得到的波谱与理论计算的结果进行比较,表明天线发射的波谱与数值计算基本一致,能满足将要在HL-2A进行的LHCD实验。     

The optical properties of planar waveguides in LiB3O5 crystals formed by Cu implantation

A planar optical waveguide has been formed in a LiB₃O₅ crystal using 6.0 MeV Cu⁺-ions with a dose of 1 × 10¹⁵ ions/cm² at room temperature. Possible propagating modes were measured at a wavelength of 633 nm using the prism-coupling method. The refractive index profiles of the waveguide were reconstructed by an effective refractive index method and the beam propagation method was used to investigate the properties of the propagation modes in the formed waveguide. The results suggest that the fundamental TE₀ and TM₀ modes may be well-confined and propagate a longer distance inside the waveguide. The implantation process was also simulated using the transport of ions in matter code (TRIM), which indicates that the nuclear energy deposition may be the main factor for the refractive index change.     

光纤光栅腐蚀传感器

提出了一种测量钢筋腐蚀的新型传感器.这种传感器将光纤光栅拉伸后固定在圆形钢筋的表面,在钢筋被腐蚀后,光纤光栅所受到的拉伸应变将被释放,光纤光栅的反射光波长发生变化,通过测量光纤光栅的波长就可以测得钢筋腐蚀程度.这种传感器测量准确度优于±0.1 μm,测量范围约12 μm,可用于混凝土结构中钢筋腐蚀的早期监测.     

Effect of cooling rate on microstructure of friction-stir welded AA1100 aluminum alloy

In this work, the microstructural changes occurring during cooling of friction-stir welded aluminum alloy AA1100 were evaluated. To this end, friction-stir welding (FSW) was performed in a wide range of cooling rates of 20–62 K/s and the evolved microstructures were studied by using electron backscatter diffraction. Below 0.6 T_m (T_m being the melting point), the stir zone material was found to experience no significant changes during cooling. At higher FSW temperatures, however, notable changes occurred in the welded material, including grain growth, sharpening of texture, reduction of the fraction of high-angle boundaries and material softening.