Tb3Al5O12∶Ce3+发光粉的微波辅助合成和性能表征

采用微波辅助合成-高温热处理制备了铈掺杂铽铝石榴石(Tb3Al5O12∶Ce3 ,简称TAG∶Ce)发光粉。用XRD、SEM、激发和发射光谱等对粉末的晶型、形貌以及发光性能进行了表征。结果表明,发光粉晶粒清晰、表面光滑,粒径在2μm以下。TAG∶Ce的激发光谱主激发峰在467nm,330nm左右存在次激发峰,375nm附近存在两个强度较弱的峰;发射光谱峰值波长为550nm,与传统固相法制备的TAG∶Ce基本一致。与传统高温固相反应法相比,此方法具有高效、节能、环保等优点。通过分析反应历程,证明了Tb2O3-Al2O3系统中Al离子的分扩散系数大于Tb离子的。     

Nonadditivity in moments of inertia of high-K multiquasiparticle bands

The experimental high-K 2-and 3-quasiparticle bands of well deformed rare-earth nuclei are analyzed.It is found that there exists significant nonadditivity in moments of inertia(MOIs)for these bands.The microscopic mechanism of the rotatiohal bands is investigated by the particle number conserving(PNC)method in the frame of cranked shell model with pairing.in which the blocking effects are taken care of exactly.The experimental rotational frequency dependenEe of these bands is well reproduced in PNC calculations.The nonadditivity in MOIs originates from the destructive interference between Pauli blocking effects.     

An Accurate Image Simulation Method for High-Order Laue Zone Effects

A completely different formulation for simulation of the high order Laue zone （HOLZ） diffractions is derived. It refers to the new method, i.e. the Taylor series （TS） method. To check the validity and accuracy of the TS method, we take polyvinglidene fluoride （PVDF） crystal as an example to calculate the exit wavefunction by the conventional multi-slice （CMS） method and the TS method. The calculated results show that the TS method is much more accurate than the CMS method and is independent of the slice thicknesses. Moreover, the pure first order Lane zone wavefunction by the TS method can reflect the major potential distribution of the first reciprocal plane.     

Subluminal and Superluminal Phenomena in a Four-Level Atom

In a four-level atomic system, we investigate the light pulse propagation properties interacting with only one laser field. It is shown that in the steady state, the group velocity of the light pulse can be changed from subluminal to superluminal by varying the field detuning. Meanwhile, the effects of the field intensity on the group velocity are also shown. At last, with special parameters, the analytical solution for the group index is also obtained.     

光声成像技术的最新进展

光声成像技术是生物医学领域中新兴的无损检测技术,具有对比度高、分辨率好、穿透能力强等优点.本文介绍了光声成像技术近年来的进展状况,主要涉及成像探测方式的改进、成像速度的加快、成像分辨率的提高以及图像重构算法的发展等.以该项技术在现代临床诊断中的应用为例,描述了其在生物医学领域中应用范围的拓宽.最后,总结了该项技术现存的...     

非圆截面环流器FY-1实验(Ⅰ)——被动运行部分

本文简略地描述了FY-1装置结构、等离子体基本参数的测量和等离子体位形的调试,初步考察了硬X射线产额与工作气压的关系。实验分析表明,FY-1装置已形成的等离子体环流放电属于逃逸放电。在场成形线圈作被动运行时,通过改变其回路连接方式和外串电感值,可适当调节等离子体平衡位置和位形。MHD平衡计算与实验测量拟合结果表明,等离子体截面可调节为不同截面积和拉长比(k=1.1—1.4)的椭圆。     

交换半环中理想的实根

在交换半环范畴中引进和研究理想的实根,从而将实代数学中有关结果推广到交换半环上。如下结果被建立:在半环中,一个理想的实根恰等于包含该理想的所有实理想的交集,并也恰等于包含该理想的所有实素理想的交集。此外,形式更为一般的理想的实根--广义实根被考虑,并获得相应的结果。     

三元合金Cu76Ni15Sn9的离子溅射研究

在２７ｋｅＶ Ａｒ⁺离子轰击时,用收集膜技术结合俄歇谱仪（ＡＥＳ）,研究了三元合金Cu₇₆Ni₁₅Sn₉系统的择优溅射行为。同时使用扫描电子显微镜（ＳＥＭ）与电子探针微分析（ＥＰＭＡ）．观察了靶点表面形貌变化并测定了形貌特征微区的合金组份原子的相对百分浓度。结果表明,Ｃｕ原子较Ｎｉ原子、Ｎｉ原子较Ｓｎ原子,在所测定范围（０─６０°）内择优发射。最后讨论了靶点表面形貌特征和“元素局域富集”现象对择优溅射过程的影响。 关键词：     

Tl2Ba2Ca2Cu3Oy超导体磁通钉扎能的分布

描述一种测量高温超导体磁通钉扎能U₀及其分布的新方法,此方法主要之点是测量磁化后样品的零场临界电流随时间的变化,利用这一方法测量Tl₂Ba₂Ca₂Cu₃O_y的U₀值分布(T=78K)。根据所得结果,对已报道的U₀值的分散性提出一种新解释。 关键词：     

Rb(62D)原子与基态Rb原子,H2分子碰撞转移截面

本文用荧光法测量Rb(6²D)原子与基态Rb原子,H₂分子碰撞转移截面。结果表明:Rb(6²D)-Rb(5²s)转移截面为σ_fs=67×10^-14cm²,σ_tr=4.3×10^-14cm²,Rb(6²D)—H₂转移截面为σ_fs 关键词：