Direct, organocatalytic α-sulfenylation of aldehydes and ketones

A method for direct sulfenylation of aldehydes and ketones, catalyzed by a novel pyrrolidine trifluoromethanesulfonamide organocatalyst, has been developed. This process serves as an efficient and mild approach to the preparation of α-phenylthio-ketones and -aldehydes.     

十四烷基三甲基溴化铵对膨润土改性合成及其表征

用阳离子表面活性剂十四烷基三甲基溴化铵(C17H38NBr)对膨润土进行插层改性制备.配制浓度为2.35%十四烷基三甲基溴化铵溶液备用.在碘量瓶中称取3.04g膨润土,加入30mL超纯水、10mL十四烷基三甲基溴化铵溶液,制成土浆,放入微波炉中反应1min.产物经抽滤、洗涤、烘干、研磨,做FT-IR和DSC-TG分析.DSC曲线在500℃时有一明显的放热峰;TG曲线显示改性土的失重率有明显的增大.有机改性膨润土中确实含有大量有机物,改性成功.     

Structure for a graph with average genus

In [2], Chen et al. showed that the average genus for a graph of maximum degree at most 3 is at least 1/2 its maximum genus. In this paper, the structure for a graph of maximum degree at most 3 with average genus equal to 1/2 its maximum genus is described. Furthermore, LetH be a subgraph ofG and γ_avg(G) = γ_avg(H). It’s shown thatG can be obtained by a series operations of type I and II onH.     

Synthesis and light emitting properties of polyacetylenes having pendent fluorene groups

Five novel fluorene‐containing polymers, poly[(9,9‐dimethylfluoren‐2‐yl)acetylene] ( PFA1 ), poly[(1‐pentyl‐2‐(9,9‐dimethylfluoren‐2‐yl)acetylene) ( PFA2 ), poly[1‐decyl‐2‐(9,9‐dimethylfluoren‐2‐yl)acetylene] ( PFA3 ), poly[1‐phenyl‐2‐(9,9‐dimethylfluoren‐2‐yl)acetylene] ( PFA4 ), and poly[1‐(3,4‐difluorophenyl)‐2‐(9,9‐dimethylfluoren‐2‐yl)acetylene] ( PFA5 ) were synthesized by the polymerization of the corresponding fluorene‐substituted acetylenic monomers ( M1–M5), using WCl₆, MoCl_5, and TaCl₅ as catalysts and n‐Bu₄Sn as a cocatalyst. The synthesized polymers were thermally stable and readily soluble in common organic solvents. The degradation temperatures for a 5% weight loss of the polymers were ∼352–503 °C under nitrogen. PFA1–PFA5 show emission peaks from 402 to 590 nm. Besides, their electroluminescent properties were studied in heterostructure light‐emitting diodes (LEDs), using PFA2–PFA5 as an emitting layer. The PFA5 device revealed an orange‐red emission peak at 602 nm with a maximum luminescence of 923 cd/m² at 8 V. A device with the ITO/PEDOT/ a mixture of PFA2 (98 wt %) and PFA5 (2 wt %)/Ca/Al showed near white emission. Its maximum luminance and current efficiency are 450 cd/m² at 15 V and 1.3 cd/A, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 519–531, 2006     

软珊瑚Sinularia sp.中次生代谢产物的结构鉴定

细胞毒性;软珊瑚Sinularia sp.中次生代谢产物的结构鉴定     

无纺布上的偕胺肟基团鳌合物的氧化还原反应的研究

 采用各种分析方法系统研究了含偕胺肟基因维尼无纺布与Ａｎ³⁺进行氧化还原反应时的化学结构变化、氧化还原与鳌合吸附的关系以及还原产物的结晶结构和形态．结果表明，含偕胺肟基无纺布与Ａｕ³⁺反应时，开始主要是偕胺肟基被氧化成为酰胺基．此外，有部分偕胺基因被氧化成为羧基．Ａｎ³⁺被还原的同时生成约相等当量的氢离子．反应后期或反应温度高时，氢离子生成量增大．实验结果还表明，在反应起始阶段，Ａｕ³⁺与偕胺肟基因会发生鳌合作用．还原生咸的单质Ａｎ形成“玫瑰花”状的小晶粒粘附于无纺布纤维表面．     

近临界水中苄叉乙酰苯的合成研究

以近临界水作为反应介质,在无外加催化剂的条件下,苯甲醛与苯乙酮可顺利反应生成苄叉乙酰苯。在最佳条件下,苄叉乙酰苯的收率可达31.4%。该方法避免了常规合成方法中有机溶剂的使用以及NaOH催化剂的加入,产物后处理简单,是一种绿色合成新过程。     

用ATRP法构筑核壳型梯度极性的多羟基多臂星状超支化聚合物及聚合物刷——双层聚合物刷的合成与表征

设计并通过原子转移自由基聚合方法 (ATRP)合成了核壳型多羟基多臂星状超支化聚合物刷 .以 2 溴异丁基酰溴封端的超支化聚 (3 乙基 3 羟甲基氧杂环丁烷 ) (HP Br)作为大分子引发剂 ,采用Cu(I)Br和N ,N ,N′ ,N′ ,N″ 五甲基二乙基三胺 (PMDETA)催化体系 ,在丁酮与丙醇的混和溶液中 ,通过甲基丙烯酸羟乙酯(HEMA)的ATRP溶液聚合 ,得到了一系列含有大量羟基的多臂星状超支化聚合物刷 (HP g PHEMA) ,并考察了其羟基的活性 ,发现羟基还可以与苯甲酰氯发生反应 .产物的结构和热性能用1 H NMR、FTIR、GPC、TGA、DSC等进行了表征和测试 .     

24-亚甲基胆甾-5-烯-3β,19-二醇的合成

从豆甾醇出发,通过10步反应,合成得到具有显著细胞毒活性的24-亚甲基胆甾-5-烯-3β,19-二醇(1),总产率为16%.目标产物1的熔点、[α]值和波谱数据与天然产物一致.化合物1的合成是首次报道,它对人体鼻咽癌(CN2)和胃癌(Mgc803)细胞有显著抑制活性.