多波段条纹管激光成像系统探测距离计算

基于条纹管激光成像的基本原理，分析了利用条纹管实现紫外到近红外波段激光成像的技术可行性，并对其性能进行了分析；建立了激光成像雷达方程，计算了不同波长在不同天气条件下的探测距离，并分析了各激光波长的应用领域和优缺点．     

北京谱仪Ⅲ飞行时间计数器系统刻度中的关联分析

利用电子对事例对北京谱仪Ⅲ飞行时间的测量误差, 以及不同测量之间的关联因子随击中位置的变化进行了仔细的研究. 加权的飞行时间由不同的测量值及其相关的误差矩阵计算而得. 蒙特卡罗研究表明. 为北京谱仪Ⅲ开发的关联分析算法 可以正确地处理包含公有误差项的多个实验测量结果的合并, 并且能够为粒子鉴别提供可靠的飞行时间信息.     

枯草杆菌在淀粉液态培养基中生产α-淀粉酶

以枯草杆菌(Bacillus subtilis BF7658)为实验菌株,以淀粉为主要原料,采用液态培养基发酵,生产α-淀粉酶。结果表明:在23℃至44℃内,培养基起始pH值为自然pH值,产酶最佳培养温度为37℃;枯草杆菌在淀粉液态培养基中控制温度为37℃,振荡培养,其产酶最适宜淀粉与水组成比例为:75∶100;在最佳温度37℃下,淀粉∶水为75∶100时,最佳培养时间为36h。     

（Na0.52K0.44Li0.04）Nb0.9-xSbxTa0.1O3 Lead-Free Piezoelectric Ceramics with High Performance and High Curie Temperature

（Na0.52K0.44Li0.04）Nb0.9-x Sbx Ta0.1O3 lead-free piezoelectric ceramics are prepared by a solid-state reaction method. With increasing Sb content, the transition temperature from orthorhombic to tetragonal polymorphic phase decreased. A composition （Na0.52K0.44Li0.04）Nb0.863Sb0.037Ta0.1O3 is found to possess excellent piezo- electric and electromechanical performances （d33 = 306pC/N, kp =48%, and kt=50%）, and high Curie temperature （Tc = 320 ℃）. These results indicate that （Na0.52K0.44Li0.04）Nb0.863Sb0.037 Ta0.1O3 is a promising lead-free piezoceramics replacement for lead zirconate titanate.     

Dependence of Crystal Quality and β Value on Synthesis Temperature in Growing Gem Diamond Crystals

High quality Ib gem diamond single crystals were synthesized in cubic anvil high-pressure apparatus （SPD- 6 × 1200） under 5.4GPa and 1230℃-1280℃. The （100） face of seed crystal was used as growth face, and Ni70Mn25Co5 alloy was used as solvent/catalyst. The dependence of crystal quality andβ value （the ratio of height to diameter of diamond crystal） on synthesis temperature was studied. When the synthesis temperature is between 1230℃ and 1280℃, theβ value of the synthetic high-quality gem diamond crystals is between 0.4 and 0.6. The results show that when theβ value is between 0.4 and O. 45, the synthetic diamonds are sheet-shape crystals; however, when theβ value is between 0.45 and 0.6, the synthetic diamonds are tower-shape crystals. In addition, when theβ value is less than 0.4, skeleton crystals will appear. When theβ value is more than 0.6, most of the synthetic diamond crystals are inferior crystals.     

Effects of Li Substitution and Sintering Temperature on Properties of Bi0.5（Na,K）0.5TiO3 Lead-Free Piezoelectric Ceramics

Bi0.5 （Na0.72K0.28- x Lix ）0.5 TiO3 （BNKLT- 100x） lead-free piezoelectric ceramics are synthesized by conventional solid state sintering techniques. The dielectric and piezoelectric properties of the BNKLT-100x ceramics as a function of Li content are systematically investigated. It is found that not only Li content but also the sintering temperature has a strong effect on the piezoelectric properties of BNKLT. The piezoelectric constant d33 Of BNKLT varies from 120 to 252pC/N in the Li content range from 0.03 to 0.16. In the sintering temperature range from 1080 to 1130℃, the d33 value of BNKLT-6 changes from 200pC/N to 252pC/N. The BNKLT-6 sample sintered at 1100℃ has the highest piezoelectric constant d33 of 252pC/N, with the electromechanical coupling factors kp of 0.32 and kt of 0.44.     

Demonstration of a 4H SiC Betavoltaic Nuclear Battery Based on Schottky Barrier Diode

A 4H SiC betavoltaic nuclear battery is demonstrated. A Schottky barrier diode is utilized for carrier separation. Under illumination of Ni-63 source with an apparent activity of 4mCi/cm^2, an open circuit voltage of 0.49 V and a short circuit current density of 29.44nA/cm^2 are measured. A power conversion efficiency of 1.2% is obtained. The performance of the device is limited by low shunt resistance, backscattering and attenuation of electron energy in air and Schottky electrode. It is expected to be significantly improved by optimizing the design and processing technology of the device.     

富硒蛹虫草中硒多糖的分离与分析

在对人工栽培的富硒蛹虫草中分离提取了水溶性硒多糖,富硒蛹虫草硒多糖的分离纯化方法是采用水提醇沉工艺,粗硒多糖得率为5.76%。系统研究了富硒蛹虫草硒多糖的浸提、纯化、分离条件,苯酚硫酸法测定了富硒蛹虫草的多糖含量为47.5%,分子荧光法测定硒多糖中含硒量为92.3 mg·kg-1。     

退火对Pb辐照Al2O3单晶发光特性的影响

研究了230MeV的²⁰⁸Pb²⁷⁺辐照Al₂O₃样品及随后在600,900,1100K高温条件下退火后的光致发光特性。从辐照样品的测试结果可以清楚地看到在波长为390,450nm处出现了强的发光峰。辐照量为1×10¹³ions/cm²时,样品的发光峰最强。经过600K退火2h后测试结果显示,380nm发光峰剧烈增强,而其他发光峰显示不明显。在900K退火条件下,380nm的发光峰开始减弱,而在360,510nm出现了明显的发光峰,至到1100K退火完毕后380nm的发光峰完全消失,而360,510nm的发光峰相对增强。从被辐照样品的FTIR谱中看到,波数在460~510cm^-1间的吸收是振动模式,经过离子辐照后,吸收带展宽,随着辐照量的增大,Al₂O₃振动吸收峰消失,说明Al₂O₃振动模式被完全破坏。1000~1300cm^-1之间为Al—O—Al桥氧的伸缩振动模式,辐照后吸收带向高波数方向移动,说明其振动模式受到影响。辐照剂量较小的样品,损伤程度相对较低,经退火晶化后,振动模式基本恢复到单晶状态;辐照剂量较高的样品,损伤程度大,退火处理后表面变得较粗糙,振动模式并未出现,说明结构破坏严重。