低温退火的X射线W/Si多层膜应力和结构性能

W/Si多层膜反射镜在硬X射线天文望远镜中有重要应用. 为减小其应力对反射镜面形和望远镜分辨率的影响, 同时保证较高的反射率, 采用150, 175和200 ℃ 的低温退火工艺对采用磁控溅射镀制的W/Si周期多层膜进行后处理. 利用掠入射X射线反射测试和样品表面面形测试对退火前后W/Si多层膜的应力和结构进行表征. 结果表明, 在150 ℃ 退火3 h 后, 多层膜1级峰反射率和膜层结构几乎没有发生变化, 应力减少约27%; 在175 ℃ 退火3 h后, 多层膜膜层结构开始发生变化, 应力减少约50%; 在200 ℃退火3 h 后, 多层膜应力减小超过60%, 但1级布拉格峰反射率相对下降17%, 且膜层结构发生了较大变化. W, Si界面层的增大和相互扩散加剧是应力和反射率下降的主要原因.     

含有AlGaAs插入层的InAs/GaAs三色量子点红外探测器

本文报道了采用分子束外延技术制备的三色InAs/GaAs量子点红外探测器. 器件采用nin型结构, 吸收区结构是在InGaAs量子阱中生长含有AlGaAs插入层的InAs量子点, 器件在77 K下的红外光电流谱有三个峰值: 6.3, 10.2和11 μm. 文中分析了它们的跃迁机制, 并且分别进行了指认. 因为有源区采用了不对称结构, 所以器件在外加偏压正负方向不同时, 光电流谱峰值的强度存在一些差异. 不论在正偏压或者负偏压下, 当偏压达到较高值, 再进一步增大偏压时, 都出现了对应于连续态的跃迁峰强度明显下降的现象, 这是由量子点基态与阱外连续态的波函数交叠随着偏压进一步增大而迅速减小导致的.     

Study of coherent diffractive production reactions ofp+C→[Y 0 K +]+C type and observation of narrow structures in ∑ (1385)0 K + and ∑0 K + effective mass spectra

In the experiments at the SPHINX facility in 70 GeV proton beam of the IHEP accelerator the coherent diffractive production reactions on carbon nucleip+C [(1385)⁰ K ⁺+C andp+C[⁰ K ⁺]+C were investigated. The evidences for new baryon states were obtained in the study of hyperon-kaon effective mass spectra in these two reactions:X (2050) with massM=(2052±6) MeV and width =(35 _–35 ⁺²² ) MeV inM[(1385)⁰ K ⁺] andX(2000) withM=1999±6 MeV and =91±17 MeV inM[⁰ K ⁺]. The unusual features of these massive states (small enough decay widths, anomalously large branching ratios for decays with strange particles emission) make them very serious candidates for cryptoexotic pentaquark baryons with hidden strangeness.     

可接入射频半实物的试验数据转换系统设计与实现

试验环节是产品研制生命周期中的重要环节,但是一直以来都缺乏有效的管理手段,在整个测试阶段都存在大量的人为的、重复性的工作,导致试验效率低下,为改善这一现状,提高试验效率,提出了一种基于PXIe数据采集系统,借助LabVIEW和DIAdem软件的测试系统解决方案：以LabVIEW控制数据高速同步采集,DIAdem调用LabVIEW模块执行算法分析,通过软件集成,实现对测试系统的全面管理,包括数据采集、数据检索、数据分析、报表生成及整个流程的自动化控制。本文以C919飞机电源测试系统为介绍对象,对该套测试系统解决方案进行阐述,实际测试情况表明,在数据吞吐率大于200M/S的情况下,相对传统测试方法,该测试方案在保证测试精度的基础上,极大的提高了试验效率,极大的提高了系统的可扩展性和可维护性。     

Application of the first collision source method to CSNS target station shielding calculation

Ray effects are an inherent problem of the discrete ordinates method. RAY3 D, a functional module of ARES, which is a discrete ordinates code system, employs a semi-analytic first collision source method to mitigate ray effects. This method decomposes the flux into uncollided and collided components, and then calculates them with an analytical method and discrete ordinates method respectively. In this article, RAY3 D is validated by the Kobayashi benchmarks and applied to the neutron beamline shielding problem of China Spallation Neutron Source(CSNS)target station. The numerical results of the Kobayashi benchmarks indicate that the solutions of DONTRAN3 D with RAY3 D agree well with the Monte Carlo solutions. The dose rate at the end of the neutron beamline is less than10.83 μSv/h in the CSNS target station neutron beamline shutter model. RAY3 D can effectively mitigate the ray effects and obtain relatively reasonable results.     

Discussion again of the magnetic and transport property of Ag-doped LaMnO3

Samples La_1−aAg_aMnO₃ (0.05?a?0.50) were sol–gel fabricated. A part of Ag was found to dissociate and run off the samples in sintering process when sintering temperature exceeds 700 °C, resulting in a composite of La_1−xAg_xMnO₃ and MnO₂/Mn₂O₃. The magnetic and transport properties of the composite have been studied. The sample with the nominal composition La_0.7Ag_0.3MnO₃ was found to show the greatest magnetoresistance in the sample group. Detailed analysis on average Mn valence reveals a composite of (La_0.985Ag_0.015MnO₃)_0.776[(MnO₂)_0.590(Mn₂O₃)_0.410]_0.224. Its MR ratio at room temperature exceeds 24% under a field of 1.8 T. A conductivity leap has been observed around a=0.30. It suggests a kind of field-induced fluctuation in percolation in the samples investigated.     

Permeability enhancement by induced displacement current in magnetic material with high permittivity

Based on a analytical model, this paper reveals that instead of demagnetization, the induced displacement current in a Mn–Zn ferrite core due to its high permittivity can produce a magnetic field that effectively adds to the incident magnetic field in the low-loss frequency region. This leads to a resultant magnetic field being larger than incident field in magnitude, and results in measured permeability being higher than its intrinsic value in the low-loss frequency region. It is also found that such effect is more pronounced in large core than in small core. With increasing frequency and consequently the core being more lossy, the induced magnetic field due to both conductivity and imaginary part of complex permittivity demagnetize the magnetic material and counteracts the incident magnetic field. In consequence, the measured real part of complex permeability becomes smaller than its intrinsic value. The larger the core dimension, the smaller the real part of complex permeability is. These conclusions based on the numerical analysis are in good agreement with the experimental observation in the aspect of change tendency of permeability versus frequency.     

Survivor statistics and damage spreading on social network with power-law degree distributions

Damage spreading(DS) of the random graph networks with power-law degree distributions is investigated using Glauber dynamics. Various subgraphs defined by the probability of acquaintance show distinct features in DS as measured by Hamming distance. A heuristic understanding of the long-time value of damage is achieved through an analysis of the survivor statistics. All survivors are dynamical, flipping in unison for the controlled sample and the damaged sample. Verification of these dynamic survivors is achieved through the introduction of a new measure of self-damage.     

SryBa1－yFCl0.5Br0.5:Sm2+在光谱

本文对无机光谱烧孔系列材料SryBa1－yFCl0.5Br0.5:Sm2+中不同组份的样品(y=0,0.25.0.5,0.75.1.00)4f5d能带的激发光谱、不同温度下5D2、5D1、5D0→7F0跃迁的荧光衰减进行了测量,研究了组份的变化对4f5d能带的位置,5D2、5D1、5D0→7F0跃迁的几率和烧孔效率的影响,并得出结论:在该系列材料中,随组份y的增加,4f5d带与5DJ能级更加接近,5D0→7F0的电子跃迁几率增大,烧孔效率提高。     

闪光X射线高速摄影荧光转换屏的设计和性质研究

本文描述了用于中间弹道高速摄影荧光转换屏的设计特点、性能测试和实验结果。文中讨论了Gd2O2S:Tb和(Zn,Cd)S对X射线的吸收系数、发光效率以及荧光光谱与变象管S-20阴极光谱灵敏度曲线相匹配的相关曲线;测试了转换屏的相对发光强度、分辨率及其余辉。实验证明本屏发光亮度比钨酸钙屏高60倍左右,屏分辩率达51p/mm,余辉时间为8μs,多幅摄影结果证明第一幅的图象对第二幅照片无“拖尾”现象,本屏已达到了中间弹道高速摄影转换屏的实用水平。