单偏振控制器环形腔光纤激光器实验研究

理论分析了非线性偏振旋转环形腔作为类饱和可吸收体获得脉冲的物理机理。在光纤环形腔结构中,采用单个偏振控制器实现了非线性偏振旋转锁模,直接获得了脉冲宽度为131 fs的超短脉冲输出。实验中,采用性能稳定的976 nm半导体二极管激光器作为抽运源,使用高掺杂浓度的Er3 光纤为增益介质,通过调节偏振控制器,获得了光谱谱宽(3 dB带宽处)为23.5 nm的稳定锁模脉冲输出。脉冲中心波长为1535.9 nm,平均功率为5.91 mW,脉冲重复率为11.20 MHz。     

High sensitivity CW-Cavity Ring Down Spectroscopy of N2O near 1.5 μm (II)

We present the second part of the investigation of the high sensitivity absorption spectrum of nitrous oxide by CW-Cavity Ring Down Spectroscopy near 1.5 μm. In a first paper [A.W. Liu, S. Kassi, P. Malara, D. Romanini, V.I. Perevalov, S.A. Tashkun, S.M. Hu, A. Campargue, J. Mol. Spectrosc. 244 (2007) 33-47] devoted to the 6000-6833 cm⁻¹ region, more than 6000 line positions of five isotopologues (¹⁴N₂¹⁶O, ¹⁵N¹⁴N¹⁶O, ¹⁴N¹⁵N¹⁶O, ¹⁴N₂¹⁷O, and ¹⁴N₂¹⁸O), were rovibrationally assigned to a total of 68 bands. The achieved noise equivalent absorption (α_min ∼ 2 × 10⁻¹⁰ cm⁻¹) allowed for the detection of lines with intensity weaker than 2 × 10⁻²⁹ cm/molecule. In this contribution, the investigated region was extended down to 5905 cm⁻¹ and additional recordings allowed accessing small spectral sections uncovered in our preceding recordings. A deeper analysis based on the predictions of the effective Hamiltonian model has allowed assigning a total of 3149 transitions and lowering the percentage of lines left unassigned from 51% to 28%. It led to the analysis of 35, 6, 7, and 6 bands for the ¹⁴N₂¹⁶O, ¹⁵N¹⁴N¹⁶O, ¹⁴N¹⁵N¹⁶O, and ¹⁴N₂¹⁸O isotopologues, respectively. Forty-two of these 54 bands are newly observed, while the rotational analysis of the twelve others is significantly extended and improved. Most of the bands were found unperturbed and their line positions could be reproduced within the experimental uncertainty (about 1 × 10⁻³ cm⁻¹). The corresponding spectroscopic parameters are reported. Local rovibrational perturbations induced by either intrapolyad or interpolyad couplings were found to affect five hot bands of ¹⁴N₂¹⁶O. Their detailed analysis is presented.     

Macroscale and microscale evolutions of mechanically alloyed FeZn systems

The present work aims to correlate, in time, macroscale and microscale phenomenological evolutions of the microstructure of Fe and FeZn alloys processed by mechanical milling (MM) and alloying (MA), respectively. Powders were characterized for particle size distribution (PSD), particle morphology (optical microscopy, OM, scanning electron microscopy, SEM), microhardness, crystallite size, differential scanning calometry (DSC) and transmission electron microscopy (TEM). Two macroscopic regimes of PSD behavior were distinguished: the first one dominated by the cold welding process; and, the other where both fracture and agglomeration play a significant role. Solid solubilization of Zn on bcc Fe was found to reduce the final microhardness as well as increase the lattice parameter and is very well predicted by Miedema's thermodynamical approach. Microhardness and solid solution formation kinetics were correlated in time and both could be precisely described by a logistic function. After 5 h of planetary milling, microhardness and the lattice parameter become stable as well as the PSD and particle morphology, indicating that the system has already reached steady state. Indeed, this condition can be monitored by both macroscopic and microscopic parameters. Prior to an homogeneous powder, DSC results suggest an endothermic solid-state amorphization reaction for samples processed for up to 1 h as a result of the formation of clean Fe/Zn interfaces during MA.     

Effects of sintering temperature and atmosphere on magnetism in Mn-doped TiO2 bulk samples

Magnetic properties have been investigated on Mn doped TiO₂(Ti_0.98Mn_0.02O₂) bulk samples prepared by solid state reaction, which were sintered at different temperature ranging from 450 ^°C to 900 ^°C in air and argon atmosphere, respectively. The results show that the magnetic properties were strongly dependent on the sintering temperature and atmosphere. For samples sintered in air, the magnetization initially increase with the increase of sintering temperature up to 600 ^°C and thereafter it decrease. While the magnetization of samples sintered in argon atmosphere decreases monotonically with the increase of sintering temperature. Furthermore, for samples sintered at 600 ^°C in air, the magnetic susceptibility exhibits a dominant Curie-Weiss behaviour and no magnetic transition is observed over the temperature range from 10 to 300 K. In contrast, for samples sintered in argon atmosphere, besides the magnetic transition near 45 K perhaps caused by Mn₃O₄, another magnetic transition appears near room temperature.     

Modeling the deformation behavior of nanocrystalline alloy with hierarchical microstructures

A mechanism-based plasticity model based on dislocation theory is developed to describe the mechanical behavior of the hierarchical nanocrystalline alloys. The stress–strain relationship is derived by invoking the impeding effect of the intra-granular solute clusters and the inter-granular nanostructures on the dislocation movements along the sliding path. We found that the interaction between dislocations and the hierarchical microstructures contributes to the strain hardening property and greatly influence the ductility of nanocrystalline metals. The analysis indicates that the proposed model can successfully describe the enhanced strength of the nanocrystalline hierarchical alloy. Moreover, the strain hardening rate is sensitive to the volume fraction of the hierarchical microstructures. The present model provides a new perspective to design the microstructures for optimizing the mechanical properties in nanostructural metals.     

Fabrication of Ni-Co binary oxide/reduced graphene oxide composite with high capacitance and cyclicity as efficient electrode for supercapacitors

Nickel-cobalt binary oxide/reduced graphene oxide (G-NCO) composite with high capacitance is synthesized via a mild method for electrochemical capacitors. G-NCO takes advantages of reduced graphene oxide (RGO) and nickel-cobalt binary oxide. As an appropriate matrix, RGO is beneficial to form homogeneous structure and improve the electron transport ability. The binary oxide owns more active sites than those of nickel oxide and cobalt oxide to promote the redox reaction. Attributed to the well crystallinity, homogeneous structure, increased active sites, and improved charge transfer property, the G-NCO composite exhibits highly enhanced electrochemical performance compared with G-NiO and G-Co₃O₄ composites. The specific capacitance of the G-NCO composite is about 1750 F g^?1 at 1 A g^?1 together with capacitance retention of 79 % (900/1138 F g^?1) over 10,000 cycles at 4 A g^?1. To research its practical application, an asymmetric supercapacitor with G-NCO as positive electrode and activated carbon as negative electrode was fabricated. The asymmetric device exhibits a prominent energy density of 37.7 Wh kg^?1 at a power density of 800 W kg^?1. The modified G-NCO composite shows great potential for high-capacity energy storage.     

Friction and wear of a spherical indenter under influence of out-of-plane ultrasonic oscillations

This paper presents an experimental and theoretical investigation of friction and wear of a spherical indenter. With the pin-on-disc-tribometer the out-of-plane oscillations are applied to the sliding indenter. Oscillations lead to a decrease of the coefficient of friction, and this effect is also related to the sliding velocity and oscillation amplitude. During the sliding movement, the contact area of indenter increases due to the wear of material. This radius of the worn spherical cap is measured after each sliding period. It is found that the radius of the wear flat increases with sliding distance according to a power law with the power 1/4 and is independent of the sliding velocity. It further is practically insensitive to the presence of oscillations. A theoretical analysis and a numerical simulation based on the method of dimensionality reduction are carried out, both describing the experimental data very well.     

含有AlGaAs插入层的InAs/GaAs三色量子点红外探测器

本文报道了采用分子束外延技术制备的三色InAs/GaAs量子点红外探测器. 器件采用nin型结构, 吸收区结构是在InGaAs量子阱中生长含有AlGaAs插入层的InAs量子点, 器件在77 K下的红外光电流谱有三个峰值: 6.3, 10.2和11 μm. 文中分析了它们的跃迁机制, 并且分别进行了指认. 因为有源区采用了不对称结构, 所以器件在外加偏压正负方向不同时, 光电流谱峰值的强度存在一些差异. 不论在正偏压或者负偏压下, 当偏压达到较高值, 再进一步增大偏压时, 都出现了对应于连续态的跃迁峰强度明显下降的现象, 这是由量子点基态与阱外连续态的波函数交叠随着偏压进一步增大而迅速减小导致的.