Effect of replacing the primary quinone by different species on the ultrafast photosynthetic electron transfer in bacterial reaction centres

Using picosecond absorption spectroscopy it has been shown that in Rhodobacter sphaeroides reaction centres the substitution of the primary quinone acceptor (QA), ubiquinone-10, by other quinone species (with redox potentials higher or lower than that of ubiquinone-10) has essentially no modifying effect on the reaction centre protein. The molecular relaxation processes that accompany the localization and stabilization of a photo-excited electron on the intermediate acceptor, bacteriopheophytin (I), are not affected, although the subsequent transfer of the electron from I to QA is slowed down. Consequently, this leads to a lower quantum efficiency of high rate of direct I-----QA reaction is normally due to the specificity of the primary quinone species and its binding site in the reaction centre protein which provide optimum steric and chemical conditions for an effective interaction between I and QA.     

Purification and characterization of befunolol reductase from rabbit liver

An enzyme (befunolol reductase) which catalyzes the reduction of befunolol to dihydrobefunolol was purified from the cytosolic fraction of rabbit liver to homogeneity by various chromatographic techniques. Befunolol reductase had molecular weights of 29000 on sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis and 34000 on gel filtration. The enzyme required reduced nicotinamide adenine dinucleotide phosphate (NADPH) as a cofactor and showed an optimal pH of 6.5. The apparent Km and Vmax values of the enzyme for the reduction of befunolol were 1.7 mM and 4.4 units/mg, respectively. Flavonoids, sulfhydryl reagents, heavy metals and coumarins strongly inhibited the enzyme. The enzyme catalyzed the reduction of a variety of aromatic ketones. In addition to befunolol, some ketone-containing drugs such as daunorubicin and levobunolol were efficiently reduced by the enzyme. On the basis of substrate specificities for steroids, befunolol reductase purified from the cytosolic fraction of rabbit liver appeared to be a 3 alpha-hydroxysteroid dehydrogenase.     

Anticoagulant activity of immobilized thrombomodulin

Bovine lung thrombomodulin was partially purified, and immobilized on agarose gel (Sepharose 4B). Immobilized thrombomodulin inhibited the procoagulant activity of thrombin, and enhanced the thrombin-catalyzed protein C activation. The plasma recalcification time test showed that immobilized thrombomodulin prolonged plasma clotting time. It is suggested that the immobilization of thrombomodulin will provide an antithrombogenic biomaterial able to convert thrombin from a procoagulant to an anticoagulant enzyme.     

Conducting polymers. I. Electrical conductivity of poly(bis-p-phenylenediaminosulphoxide)

Poly(bis-p-phenylenediaminosulphoxide) was prepared by Michael addition of p-bis-N-sulphinylphenylenediamine with p-phenylenediamine at 150°C. Thermal and electrical behaviors of the polymer have been studied. The polymer is found to have increased conductivity possibly due to the participation of lone pairs of electrons on nitrogen and sulphur atoms with σ bond of the macrochain. Thermogravimetric analysis indicates that the polymer is fairly stable than other conducting polymers up to 200°C. The activation energy of the polymer was measured and found to be 13 kcal mol^?1.     

Use of transition elements to enhance sensitivity for selenium determination by graphite-furnace atomic-absorption spectrophotometry combined with solvent extraction with the APDC-MIBK system

A microanalytical method for the measurement of selenium in waters and biological materials by a flameless atomic-absorption technique has been developed. The ammonium pyrrolidinedithiocarbamate-methyl isobutyl ketone extraction system is used for separation from interfering materials such as large amounts of alkali and alkaline earth metal salts and mineral acids. The atomic-absorption sensitivity for selenium is found to be enhanced to a large extent by co-extraction of some transition metal ions. Copper(II) has been used successfully as such an additive to diminish the volatility of selenium in the graphite furnace during the ashing step of the atomization cycle. When the aqueous phase/organic solvent volume ratio is 5 and the volume injected into the graphite furnace is 20 mul, the sensitivity for selenium is 0.3 ng/ml for 1% absorption. The relative standard deviation is ca. 2%. Interference by other metal ions is prevented by masking with EDTA. The method has been applied satisfactorily for the determination of minute amounts of selenium in waters and various biological materials.     

Thermal properties of sodium acetylacetonate

Sodium acetylacetonate was prepared by the interaction of acetyl acetone with sodium hydroxide. The thermal conductivity, phonon velocity, mean free path, Yong's modulus, and the thermal expansion coefficient were studied. The thermal conductivity of the material decreases with increasing temperature due to the thermal lattice scattering of phonons. The velocity of phonons is also decreased due to the perturbation of thermal phonons. The linear thermal expansion coefficient increases with temperature due to the weakness of the attractive forces between the small Na⁺ cations and bulkier acetylacetonate anions in the lattice.

---

Zusammenfassung Natriumacetylacetonat wurde durch die Wechselwirkung zwischen Acetylaceton und Natriumhydroxid gewonnen. Es wurde die Wärmeleitfähigkeit, die Phononengeschwindigkeit, die mittlere freie Wegstrecke, das Elastizitätsmodul und der Wärmeausdehnungskoeffizient untersucht. Die Wärmeleitfähigkeit der Substanz nimmt wegen der thermischen Gitterstreuung der Phononen mit steigender Temparatur ab. Die Geschwindigkeit der Phononen nimmt auf Grund der Perturbierung der thermischen Phononen ebenfalls ab. Der lineare Wärmeausdehnungskoeffizient steigt mit zunehmender Temperatur an, was auf die schwachen Anziehungskräfte zwischen den kleinen Na⁺ Ionen und den massigen Acetylacetonat-Anionen im Gitter zurückzuführen ist.

     

Significance of anti-HBc IgM in acute hepatitis and hepatitis B associated chronic liver disease

To determine the diagnostic value of anti-HBc IgM in acute viral hepatitis or chronic liver disease B, Anti-HBc IgM was measured by a RIA and an ELISA in 32 patients with acute hepatitis (4 with type A, 15 with type B and 13 with type non A non B), 18 patients with chronic hepatitis and 19 patients with liver cirrhosis. In acute hepatitis B, anti-HBc IgM (both RIA and ELISA) was positive in 14(93%) of 15 patients and its cut-off index value was very high. However, anti-HBc IgM was always negative in one patient with typical course of type B. In 1 of 4 patients with acute hepatitis A and 2 of 13 with non A non B, anti-HBc IgM (RIA and/or ELISA) was positive. These 3 patients were positive for anti-HBs at the onset of disease, so we could not made the diagnosis of acute hepatitis B. Anti-HBc IgM was positive in 21(51%) of 37 patients with HBsAg-positive chronic liver disease by RIA and in 11 (30%) by ELISA, and its cut-off index value was relatively low. These results suggest that when adequate cut-off index value is established, anti-HBc analysis is useful for differentiating recent and current infections from remote infections.     

Synthesis of thieno[3.2-<Emphasis Type="Italic">b</Emphasis>]pyrrolenine derivatives under the Fischer reaction conditions

The reaction of alkyl 4-(2-acetylhydrazino)-2-methyl-3-thiophenecarboxylates with 3-methylbutan-2-one was carried out under the Fischer reaction conditions. The influence of Lewis acids and solvents on the process was studied. A convenient method for the synthesis of thieno [3.2-b]pyrrolenine derivatives was proposed.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 725–729, March, 2005.     

Polymers for DNA delivery

Nucleic acid delivery has many applications in basic science, biotechnology, agriculture, and medicine. One of the main applications is DNA or RNA delivery for gene therapy purposes. Gene therapy, an approach for treatment or prevention of diseases associated with defective gene expression, involves the insertion of a therapeutic gene into cells, followed by expression and production of the required proteins. This approach enables replacement of damaged genes or expression inhibition of undesired genes. Following two decades of research, there are two major methods for delivery of genes. The first method, considered the dominant approach, utilizes viral vectors and is generally an efficient tool of transfection. Attempts, however, to resolve drawbacks related with viral vectors (e.g., high risk of mutagenicity, immunogenicity, low production yield, limited gene size, etc.), led to the development of an alternative method, which makes use of non-viral vectors. This review describes non-viral gene delivery vectors, termed "self-assembled" systems, and are based on cationic molecules, which form spontaneous complexes with negatively charged nucleic acids. It introduces the most important cationic polymers used for gene delivery. A transition from in vitro to in vivo gene delivery is also presented, with an emphasis on the obstacles to achieve successful transfection in vivo.     

Protonation et hydrolyse d'enamine. Epimerisation des immoniums intermediaires

At pH 5 (AcOHAcONa) protonation of the enamine of 3,6,6-trimethylnorpinane 2-one (3-methylnopinone) yields the cis immonium ion 6 (X  OAc), which isomerizes to the thermodynamically more stable trans immonium ion 6′ (X  OAc). Under more strongly acid conditions (aqueous hydrochloric or perchloric acids), the enamonium salts 7 (X  Cl or ClO₄) are formed; these isomerize, with a rate increasing with decreasing acidity to the cis immonium salts 6, stable under these conditions. Epimerization of the cis salt 6 (X  Cl), occurs in ethereal hydrogen chloride, the rate increasing also with decreasing acidity. At pH 5, hydrolysis of the enamine yields 3-methylnopinone, the proportion of the less thermodynamically stable trans isomer increasing with a rise in reaction temperature.