A millimeter/sub-millimeter-wave spectroscopic study of the FeCl radical (XΔi)

Pure rotational spectroscopy of the FeCl radical (X⁶Δ_i) has been carried out using millimeter/sub-millimeter direct absorption techniques. The species was created by the reaction of chlorine with iron vapor. All six spin-orbit components were observed in the majority of the twenty-one rotational transition recorded. Chlorine hyperfine structure was resolved in the Ω = 9/2 and 7/2 components, and lambda-type doubling observed in the Ω = 3/21/2, and −1/2 ladders. The data were analyzed with a ⁶Δ Hamiltonian, and rotational, fine structure, lambda-doubling, and hyperfine parameters determined. The hyperfine and lambda-doubling interactions in FeCl appear to be different from those in the FeF radical.     

Photophysics of ruthenium(II) complexes with 2-(2′-pyridyl) pyrimidine and 2,2′-bipyridine ligands in fluid solution

The photophysics of three complexes of the form Ru(bpy)₃₋(pypm)²⁺ (where bpy2,2′-bipyridine, pypm 2-(2′-pyridyl)pyrimidine and P=1, 2 or 3) was examined in H₂O, propylene carbonate, CH₃CN and 4:1 (v/v) C₂H₅OH---CH₃OH; comparison was made with the well-known photophysical behavior of Ru(bpy)₃²⁺. The lifetimes of the luminescent metal-to-ligand charge transfer (MLCT) excited states were determined as a function of temperature (between −103 and 90 °C, depending on the solvent), from which were extracted the rate constants for radiative and non-radiative decay and ΔE, the energy gap between the MLCT and metal-centered (MC) excited states. The results indicate that ^*Ru(bpy)₂(pypm)²⁺ decays via a higher lying MLCT state, whereas ^*Ru(pypm)₃²⁺ and ^*Ru(pypm)₂(bpy)²⁺ decay predominantly via the MC state.     

New structure type in the morphotropic series of A 2 + M 2 2+ (MoO4)3: crystal structure of Rb2Cu2(MoO4)3

Isostructural compounds A₂Cu₂(MoO₄)₃ (A = Rb, Cs) were synthesized. The new structure type of the compounds was established for the rubidium-containing compound as an example (a =27.698,b =5.102,c =19.292 å, Β = 707.26?,Z = 8, space group C2/c, R = 0.016). The structure is characterized by pairs of infinite wolframite-like ribbons of CuO₍₄₊₂₎ octahedra stretching along [010] and additionally bridged by MoO₄ tetrahedra. The tetrahedra located between the ribbons weakly interact with each other at distances Mo-O of 2.545 and 2.853 å. There are four such quasione-dimensional copper-molybdenum-oxygen radicals per unit cell; the radicals are united into a single structure by rubidium ions having coordination numbers (CN) 9 and 10.     

Mechanical properties and transition temperatures of crosslinked-oriented gelatin

 This second part of a systematic study of the properties of crosslinked-oriented gelatin involves the effects of orientation and water content on the glass transition temperature T _g and on the melting behavior. The samples were the same as those in the preceding study, and their transition temperatures were determined by both differential scanning calorimetry and dynamic mechanical thermal analysis. The crosslinked gelatin which had been room-conditioned showed two transition temperatures: the lower one was attributed to T _g of the water-plasticized gelatin, and the higher one was interpreted as T _g of dried gelatin superimposed by melting. A rather unusual situation arose because of the fact that the T _g and melting temperatures T _m (217 and 230 ^°C, respectively) are so similar. Using water as plasticizer not only decreases T _g but produces imperfect crystallites which melt below the T _g of the system. The presence of the amorphous phase in the glassy state would presumably make it essentially impossible to define a melting point or crystallization temperature in the normal manner, as an equilibrium between crystalline and amorphous phases. Received: 8 October 1996 Accepted: 2 November 1995     

Determination of ionization constants of saccharides by capillary zone electrophoresis with amperometric detection

Summary A method based on a linear model enabling the efficient determination of the ionization constants (K _a) of saccharides by capillary zone electrophoresis with amperometric detection has been demonstrated. TheK _a values obtained from the plots of the reciprocal effective mobility against the inverse concentration of sodium hydroxide were in agreement with literature values.     

Rhodium and palladium β-diketonate determination with on-line supercritical fluid extraction-high performance liquid chromatography via solid phase extraction

 An on-line system of supercritical fluid extraction (SFE) and high performance liquid chromatography (HPLC) via solid phase extraction (SPE) is described for the determination of palladium and rhodium 2,2,6,6-tetramethyl-3,5-heptanedione-(thd) as well as rhodium-acetylacetonate-(acac) and benzylacetonate-(bzac) chelates. The chelates were extracted with supercritical CO₂ from sand and humic acid, concentrated on SPE cartridges and analysed with HPLC. Two cartridge materials were tested and compared to off-line trapping. The percentage of the breakthrough and cartridge retained material were measured in liquid dichloromethane. The SFE conditions could be optimized to separate metal chelates during the extraction. The supercritical fluid (SF) behaviour of different ligands on rhodium were investigated. Received: 19 July 1996/Revised: 11 December 1996/Accepted: 14 December 1996     

Identification and determination of aesculin and aesculetin in ash barks by capillary zone electrophoresis

Summary A capillary zone electrophoresis method for identification and determination of aesculin and aesculetin has been established using borate-phosphate buffer containing 30% ethanol with on-column UV detection. A detailed investigation of the influence of changes in borate concentration, pH, applied voltage, temperature and organic modifier was then carried out. For both aesculin and aesculetin, a linear plot of migration time (MT) against borate concentration was obtained, and ln[measured peak area (MA)] and lnMT both gave linear plots against ln(applied voltage) with correlation coefficient r>0.999, which also resulted in a linear correlation between MA and MT (r≥0.9998) under varied voltage. Ethanol as organic modifier to the background electrolytes helped in separating aesculin and aesculetin from other components in ash barks. The reproducibility with relative standard deviation in MT and in normalized peak area(NA) and linearity based on NA against concentration were evaluated. Finally, the method was successfully applied to monitor the quality of different ash barks and to compare the effect of sample preparation on content of bioactive components in ash bark. Results indicate that CZE promises to be applicable to quality control of traditional Chinese medicines containing aesculin and aesculetin.     

Ultrasensitive small molecule fluorogenic probe for human heparanase

Heparanase (HPA) is a critical enzyme involved in the remodeling of the extracellular matrix (ECM), and its elevated expression has been linked with diseases such as various types of cancer and inflammation. The detection of heparanase enzymatic activity holds tremendous value in the study of the cellular microenvironment, and search of molecular therapeutics targeting heparanase, however, no structurally defined probes are available for the detection of heparanase activity. Here we present the development of the first ultrasensitive fluorogenic small-molecule probe for heparanase enzymatic activity via tuning the electronic effect of the substrate. The probe exhibits a 756-fold fluorescence turn-on response in the presence of human heparanase, allowing one-step detection of heparanase activity in real-time with a picomolar detection limit. The high sensitivity and robustness of the probe are exemplified in a high-throughput screening assay for heparanase inhibitors.

Heparanase, a critical enzyme involved in the remodeling of the extracellular matrix, activates a disaccharide probe HADP to give a strong fluorescence signal.     

Coordination-based self-assembled capsules (SACs) for protein,CRISPR–Cas9, DNA and RNA delivery

Biologics, such as functional proteins and nucleic acids, have recently dominated the drug market and comprise seven out of the top 10 best-selling drugs. Biologics are usually polar, heat sensitive, membrane impermeable and subject to enzymatic degradation and thus require systemic routes of administration and delivery. Coordination-based delivery vehicles, which include nanosized extended metal–organic frameworks (nMOFs) and discrete coordination cages, have gained a lot of attention because of their remarkable biocompatibility, in vivo stability, on-demand biodegradability, high encapsulation efficiency, easy surface modification and moderate synthetic conditions. Consequently, these systems have been extensively utilized as carriers of biomacromolecules for biomedical applications. This review summarizes the recent applications of nMOFs and coordination cages for protein, CRISPR–Cas9, DNA and RNA delivery. We also highlight the progress and challenges of coordination-based platforms as a promising approach towards clinical biomacromolecule delivery and discuss integral future research directions and applications.

SACs can be efficiently used to load biologics such as proteins, CRISPR–Cas9, DNA and RNA and release them on-demand.