Arborescent polystyrene‐graft‐poly(tert‐butyl methacrylate) copolymers: Synthesis and enhanced polyelectrolyte effect in solution

A technique is described for the preparation of arborescent graft copolymers containing poly(tert‐butyl methacrylate) (PtBMA) segments. For this purpose, tert‐butyl methacrylate is first polymerized with 1,1‐diphenyl‐2‐methylpentyllithium in tetrahydrofuran. The graft copolymers are obtained by addition of a solution of a bromomethylated polystyrene substrate to the living PtBMA macroanion solution. Copolymers incorporating either short (M_w ≈ 5000) or long (M_w ≈ 30,000) PtBMA side chains were prepared by grafting onto linear, comb‐branched (G0), G1, and G2 bromomethylated arborescent polystyrenes. Branching functionalities ranging from 9 to 4500 and molecular weights ranging from 8.8 × 10⁴ to 6.3 × 10⁷ were obtained for the copolymers, while maintaining a low apparent polydispersity index (M_w/M_n ≈ 1.14–1.25). Arborescent polystyrene‐graft‐poly(methacrylic acid) (PMAA) copolymers were obtained by hydrolysis of the tert‐butyl methacrylate units. Dynamic light scattering measurements showed that the arborescent PMAA copolymers are more expanded than their linear PMAA analogues when neutralized with NaOH. This effect is attributed to the higher charge density in the branched arborescent copolymer structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2335–2346, 2008     

Multiwalled carbon nanotube/polymer nanocomposites: Processing and properties

Nanocomposite materials were prepared with an amorphous poly(styrene‐co‐butyl acrylate) latex as a matrix with multiwalled carbon nanotubes (MWNTs) as fillers. The microstructure of the related films was observed by transmission electron microscopy, which showed that a good dispersion of MWNTs within the matrix was obtained. The linear and nonlinear mechanical behavior and the electrical properties were analyzed. Mechanical characterization showed a mechanical reinforcement effect of the MWNTs with a relatively small decrease of the elongation at break. The composite materials exhibited an elastic behavior with increasing temperature, although the matrix alone became viscous under the same conditions. The electrical conductivity of the composite filled with 3 vol % MWNTs was studied during a tensile test, which highlighted the late damage of the material. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1186–1197, 2005     

Improved derivatization technique for gas chromatography-mass spectrometry determination of 3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone in drinking water

The quantification of 3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (Mutagen X or MX) in drinking water is difficult due to the low concentration of MX in drinking water, its high sensitivity to pH change, and matrix effects that interfere with the derivatization and analysis. Typically, the quantification of MX involves derivatization by methylation. We present a one-step derivatization procedure for MX using N-methyl-bis-trifluoroacetamide (MBTFA) and analysis by ion trap GC/MS/MS. The new method resulted in a significant reduction in analysis time, and improved detection limits. The abundant and selective ions in the mass spectrum of the trifluoroacylated MX (trifluoroacetic acid-4-chloro-3-dichloromethyl-5-oxo-2-hydro-furan-2-yl ester) allowed for a clear identification and quantification of the compound, with a method detection limit of 7.7 ng L⁻¹, and a limit of quantitation of 24.4 ng L⁻¹. The trifluoroacylated MX was shown to be stable for 30 days in an excess of the derivatization reagent. The new method was applied for the determination of MX in several drinking water samples, with a concentration range from not-detected to 517 ng L⁻¹; these values are comparable to those obtained in previous studies. The development of this new simplified analytical method for MX is an important step forward in the field of disinfection by-product (DBP) research, particularly in light of the recent scientific recognition of halogenated furanones as emerging drinking water contaminants. Increased analytical ability may well be a decisive factor in the monitoring of these disinfection by-products.     

Qubit-Based Clock Synchronization for QKD Systems Using a Bayesian Approach

Quantum key distribution (QKD) systems provide a method for two users to exchange a provably secure key. Synchronizing the users’ clocks is an essential step before a secure key can be distilled. Qubit-based synchronization protocols directly use the transmitted quantum states to achieve synchronization and thus avoid the need for additional classical synchronization hardware. Previous qubit-based synchronization protocols sacrifice secure key either directly or indirectly, and all known qubit-based synchronization protocols do not efficiently use all publicly available information published by the users. Here, we introduce a Bayesian probabilistic algorithm that incorporates all published information to efficiently find the clock offset without sacrificing any secure key. Additionally, the output of the algorithm is a probability, which allows us to quantify our confidence in the synchronization. For demonstration purposes, we present a model system with accompanying simulations of an efficient three-state BB84 prepare-and-measure protocol with decoy states. We use our algorithm to exploit the correlations between Alice’s published basis and mean photon number choices and Bob’s measurement outcomes to probabilistically determine the most likely clock offset. We find that we can achieve a 95 percent synchronization confidence in only 4140 communication bin widths, meaning we can tolerate clock drift approaching 1 part in 4140 in this example when simulating this system with a dark count probability per communication bin width of 8×10−4 and a received mean photon number of 0.01.     

Quantitation of hydroxylated byproduct formation in a Saccharomyces cerevisiae Delta9 desaturating system

The distribution of products obtained from stearoyl CoA Delta9 desaturase-mediated oxidation in Saccharomyces cerevisiae has been measured directly for the first time using an omega-fluorinated fatty acid substrate.     

MeV ion jets from short-pulse-laser interaction with thin foils

Collimated jets of carbon and fluorine ions up to 5 MeV/nucleon ( approximately 100 MeV) are observed from the rear surface of thin foils irradiated with laser intensities of up to 5 x 10 (19)W/cm(2). The normally dominant proton acceleration could be surpressed by removing the hydrocarbon contaminants by resistive heating. This inhibits screening effects and permits effective energy transfer and acceleration of other ion species. The acceleration dynamics and the spatiotemporal distributions of the accelerating E fields at the rear surface of the target are inferred from the detailed spectra.     

Alkylations en α de fonctions organiques par l'intermédiaire de compostés organostanniques

Organotin enolates and α-organotin substituted nitriles or esters which are generally easy to obtain, can be used to alkylate α to functional groups.In the case of organotin enolates, heating with alkylating agents, usually gives monoalkylated products in very good yields: numerous examples with ketones and aldehydes are described.With α-organotin substituted nitriles and esters, direct alkylation does not occur, but good results can be obtained in the presence of either magnesium or lithium bromide, or after a metal exchange reaction with a Grignard or lithium reagent.