Construction and cosmic-ray test of the new inner drift chamber for BESIII

A new inner drift chamber has been built which can replace the aged part of the BESIII drift chamber when needed. The design of the new inner drift chamber can minimize the ineffective area in the very forward and backward region and hence reduce the background event rate. With this design, the new inner drift chamber is expected to have a longer lifetime and improved performance due to the lower occupancy. The endplates and the cylinder were machined with high precision. Wire stringing was performed after the mechanical structure was assembled, and good quality of wire stringing was ensured by measurement of the tension and leakage current of the wires. After completion of the physical construction of the new chamber, a cosmic-ray test was carried out to test its performance. The results of the cosmic-ray test show that the new inner chamber achieves a spatial resolution of127 μm and a d E/dx resolution of 6.4%, which satisfies the design specifications.     

NⅡ离子2p4f—2p3d辐射跃迁概率的理论研究

在全相对论理论框架下，利用多组态Dirac-Fock(MCDF)方法，系统计算了NⅡ离子2p4f—2p3d的辐射跃迁概率，得到的结果与已有实验值符合很好.具体计算中，详细分析了相对论效应、电子关联、弛豫效应、Breit相互作用和量子电动力学(QED)效应对能级精细结构及辐射跃迁概率的影响.结果表明：相对论效应、电子关联和弛豫效应对NⅡ 2p4f-2p3d辐射跃迁概率有很重要的影响,考虑了这些效应后计算值得到明显改善.     

New side-pump scheme for large mode area fiber lasers by wrapping polished fibers conjugate caustic removed

With the purpose of uniform gain coefficient along the axial direction in the core of gain guided and index anti-guided fiber, a new kind of side-pump scheme by wrapping particularly treated fibers around the central GGIAG fiber is reported in this paper. According to leakage mode analysis on wrapped fiber and numerical simulation on this pumping structure having ytterbium doped central fiber and conventional wrapped side fiber, we find this kind of pump scheme can improve the uniformity of gain coefficient along the fiber direction, and also, it can support multi channels of pumping sources by adding more side fibers to improve the total effective incident pumping power.     

三效吸收式制冷循环系统性能分析

对12个通用的三效循环系统以及这12个通用循环系统组成的76种可能的密闭循环系统进行了评测。根据通用三效循环系统的压力和溶解度要求,对通用三效循环系统进行了分析,并充分考虑各部件设计中的问题和COPs数值,以及处于高腐蚀环境中部件的数目。通过分析,确定了四个性价比较优的系统:Alkitrate Topping循环系统,Pressure Staged Envelope循环系统,High Overlap循环系统和Dual Loop循环系统。     

热声系统中回热器特征阻抗与传播常数的研究

针对本实验室一台声驱动热声系统,采用传递函数法研究声驱动系统中回热器的特征阻抗和传播常数.通过调节谐振管长度,改变回热器表面的阻抗,从理论上分析了回热器网络传输方程中的声传播常数、特征阻抗与系统网络元件中的阻抗、导纳和流的关系.并且进一步讨论有无换热器以及不同的加热功率对回热器网络参数的影响.结论有利于进一步量化回热器的网络参数.     

链间耦合对聚合物中双激子态反向极化的影响

从紧束缚模型出发，研究了链间相互作用对双激子态反向极化的影响.结果发现：加链间耦合后，双激子态仍主要局域在一条链中.当简并破缺较小时，反向极化程度随耦合强度的增加大幅提高；当简并破缺较大时，反向极化程度随耦合强度的增加基本不变. 关键词： 反向极化 双激子态 链间耦合     

Measurements of NO2 mixing ratios with topographic target light scattering-differential optical absorption spectroscopy system and comparisons to point monitoring technique

A topographic target light scattering-differential optical absorption spectroscopy(ToTaL-DOAS) system is developed for measuring average concentrations along a known optical path and studying surface-near distributions of atmospheric trace gases.The telescope of the ToTaL-DOAS system points to targets which are located at known distances from the measurement device and illuminated by sunlight.Average concentrations with high spatial resolution can be retrieved by receiving sunlight reflected from the targets.A filed measurement of NO2 concentration is performed with the ToTaL-DOAS system in Shijiazhuang in the autumn of 2011.The measurement data are compared with concentrations measured by the point monitoring technique at the same site.The results show that the ToTaL-DOAS system is sensitive to the variation of NO2 concentrations along the optical path.     

表面润湿法合成β沸石体系中晶种作用的研究

系统研究了表面润湿法合成β沸石的体系中,干晶种、润湿态晶种、异晶晶种(Y沸石、ZSM 5沸石)以及碱处理β沸石晶种在此晶化体系中的作用.采用β沸石产品及异晶作晶种时,可使产品的相对结晶度稍有提高,但对沸石微晶核的结构导向作用不明显.经浓碱液处理20min后的β沸石产品(碱处理晶种)作晶种引入晶化体系后,可以显著提高产品的相对结晶度,降低模板剂的用量,缩短晶化诱导期,成为表面润湿法合成β沸石体系的有效晶种形式.     

板条Nd:YAG晶体的合成盘抛光技术

针对高功率板条激光器核心工作器件——板条Nd:YAG晶体的超精密加工开展研究,分析了具有特殊构型的板条Nd:YAG晶体元件的加工性能及工艺难点,提出了一种新的基于合成盘抛光的板条Nd:YAG晶体加工工艺,并对规格为100mm×30mm×3mm的板条Nd:YAG晶体进行了加工实验。实验结果表明,合成盘抛光可以很好地控制元件的塌边现象;通过磨料的优化选择,在合成盘抛光工艺中匹配合适粒度的Al2O3磨料能够实现元件的低缺陷加工,元件下盘后的全反射面平面度达0.217λ(1λ=632.8nm),端面平面度达到0.06λ,表面粗糙度达0.55nm(RMS),端面楔角精度可达2″。