Self-compensation of third-order dispersion for ultrashort pulse generation demonstrated in an Yb fiber oscillator

Compensation of the intracavity dispersion in the mode-locked oscillator is known to be one of the most important factors for ultrashort pulse generation. However, recent investigations of a Yb-doped fiber mode-locked oscillator revealed that precise third-order dispersion (TOD) compensation is not always necessary for ultrashort pulse generation, owing to the strong nonlinearity that compensates residual TOD without reducing its spectral bandwidth. The origin of the nonlinear TOD compensation has remained unclear. To investigate the process in detail, we studied the pulse evolution inside a 30 fs Yb-doped fiber mode-locked oscillator both experimentally and numerically, and we found that the nonlinear phase shift with a temporally asymmetric pulse shape introduces an appropriate amount of TOD that exactly cancels the residual cavity dispersion.     

TL, OSL and ESR studies on beryllium oxide

Electron spin resonance (ESR) studies were carried out to identify the defect centres responsible for the thermoluminescence (TL) and optically stimulated luminescence (OSL) processes in BeO phosphor. Two defect centres were identified in irradiated BeO phosphor by ESR measurements, which were carried out at room temperature and these were assigned to an O⁻ ion and Al²⁺ centre. The O⁻ ion (hole centre) correlates with the main 190 °C TL peak. The Al²⁺ centre (electron centre), which acts as a recombination centre, also correlates to the 190 °C TL peak. A third centre, observed during thermal annealing studies, is assigned to an O⁻ ion and is related to the high temperature TL at 317 °C. This centre also appears to be responsible for the observed OSL process in BeO phosphor.     

Ultrastructure of the myotendinous junction of the medial pterygoid muscle of adult and aged Wistar rats

The myotendon junction (MTJ) is a specialised area into the muscle fibers where the sarcoplasmic membranes connect to the collagen fibers bundles. There are few data about plasticity of the MTJ in aging processes. The aim of this study is to analyse the ultrastructure characteristics of MTJ of medial pterygoid muscle of adult and aged rats. Employing the transmission electron microscopy method, twenty male rats Wistar (Rattus norvegicus) were divided into two groups: A (n = 10) with 12 months of age; B (n = 10) 24 months of age. The animals were anaesthetised with overdose the urethane (3 g/kg, i.p.) and sacrified during the perfusion with modified Karnovsky solution. The specimens were post-fixed in a 1% osmium tetroxide solution, dehydrated in ascending concentration of ethanol and embedded in Spurr resin. The thin sections, of 90 nm thick, were counterstained with uranyl acetate and lead citrate solution, and examined in a Jeol 1010 transmission electron microscope. The fine structure of the MTJ of group A revealed the defined interdigitations and disposed in several levels of deep formations containing the collagen fibers. In the group B, such structures did not observed, detecting the projections irregular in shape, and large of extra matrix with in aspect of remodelling. In conclusion it was possible to identify the plasticity of MTJ in the group B which presented several morphological alterations comparing to the adult animals. These data of group B suggested the occurrence of aging processes in the MTJ in rats.     

Synthesis of the ABC and IJ ring fragments of yessotoxin

Synthesis of a 6/6/6 tricyclic ether system (3) corresponding to the ABC ring fragment of yessotoxin (1) has been achieved via coupling of a triflate and a 2-lithiofuran followed by intramolecular hetero-Michael addition. The IJ ring fragment (4) of 1 was readily synthesized via successive Sharpless epoxidation and 6-endo cyclization of the resulting vinyl epoxide.     

Molecular-shape imprinting and immobilization of biomolecules on a polymer containing azo dye

We demonstrate a novel technique for molecular imprinting and immobilization on a surface of a polymer containing azo dyes (azopolymer). The azopolymer was found to be capable of immobilizing micrometer- and nanometer-scale macromolecules (e.g., lambda-DNA, immunoglobulin G (IgG), bacterial protease, and 1-mum polystyrene particles) through photoirradiation with blue-wavelength light. Fluorescence and atomic force microscopy studies revealed that the azopolymer surface deformed along with the shape of the macromolecules, holding them in place after photoirradiation. The desorption of the immobilized macromolecules from the azopolymer surface in an aqueous medium was observed to be very slow, on the time scale of 10 min to weeks, depending on the photoirradiation time. Immunological and enzymatic studies showed that IgG and bacterial protease immobilized on the azopolymer surface retained their original functionality. These results suggest that the azopolymer physically, not chemically, binds the macromolecules because of the increase in contact area between the macromolecules and the azopolymer surface after photoirradiation.     

Zinc(II) porphyrins at the air-water interface as studied by polarized total-reflection X-ray absorption fine structure

The polarized total-reflection X-ray absorption fine structure method was applied to characterize zinc porphyrins at the air-water interface. The X-ray absorption near edge structure exhibited a significant difference depending on the polarization of the X-ray. A shoulder peak of the Zn K-edge corresponding to the 1s-4p(z) transition for a square planar metal complex without axial coordination(s) was observed at 9662 eV, which indicates that the axial coordination sites of zinc porphyrin molecules examined are not fully hydrated at the air-water interface. The molecular orientation of zinc porphyrins was determined by analyzing the polarization dependence of the transition peak intensity. The meso-substituted porphyrin derivative 5,10,15,20-tetraphenylporphyrinatozinc(II) (ZnTPP) orients rather parallel to the solution surface. In contrast to ZnTPP, the zinc(II) protoporphyrin IX (ZnPP) with hydrophilic carboxyl groups at one side of the molecule stands up with respect to the solution surface, and the average tilting angle of the porphyrin plane to the surface was evaluated to be between 57 degrees and 43 degrees. In addition, the axial coordination of ZnPP is modified depending on the surface concentration, in which the axial hydration to the zinc center is effectively inhibited in the compressed surface layer.     

Total syntheses of zaragozic acids A and C by a carbonyl ylide cycloaddition strategy

A carbonyl ylide cycloaddition approach to the squalene synthase inhibitors zaragozic acids A and C is described. The carbonyl ylide precursor 8 was synthesized starting from di-tert-butyl D-tartrate (47) via an eleven-step sequence involving the regioselective reduction of the mono-MPM (MPM=4-methoxybenzyl) ether 48 with LiBH4 and the diastereoselective addition of sodium tert-butyl diazoacetate to alpha-keto ester 10. The reaction of alpha-diazo ester 8 with 3-butyn-2-one (40) in the presence of a catalytic amount of [Rh2(OAc)4] gave the desired cycloadduct 59 as a single diastereomer. The dihydroxylation of enone 59 followed by sequential transformations permitted the construction of the fully functionalized 2,8-dioxabicyclo[3.2.1]octane core 5. Alkene 79 derived from 5 serves as a common precursor to zaragozic acids A (1) and C (2), since the elongation of the C1 alkyl side chain can be attained by olefin cross-metathesis, especially under the influence of Blechert's catalyst (85).     

Improved 2-nitrobenzenesulfenyl method: optimization of the protocol and improved enrichment for labeled peptides

We have developed the NBS (2-nitrobenzenesulfenyl) method, a quantitative proteome analysis method utilizing stable isotope labeling followed by mass spectrometry. The potential of this method was reported previously, and the procedure has now been further optimized. Here, we describe a procedure utilizing urea or guanidine hydrochloride as a protein denaturant, in conjunction with an improved chromatographic enrichment method for the NBS-labeled peptides using a phenyl resin column. By using this new protocol, both sample loss throughout the protocol and the elution of unwanted unlabeled peptides can be minimized, improving the efficiency of the analysis significantly.     

Interlaboratory evaluation of two enzyme-linked immunosorbent assay kits for the detection of egg, milk, wheat, buckwheat, and peanut in foods

The labeling of 5 major allergenic ingredients (egg, milk, wheat, buckwheat, and peanut) is mandatory in Japan, and 2 series of enzyme-linked immunosorbent assay (ELISA) kits have been established as official screening methods. However, these official methods have not provided the necessary sensitivity, due in part to poor extraction efficiency. To address this need, 2 novel ELISA kits have been developed: the FASTKIT ELISA Ver. II Series and the FASPEK Allergenic Substances Detection Kit. The new kit systems use an improved extraction buffer that can extract insoluble proteins produced by processing and feature new antibodies that bind to the denatured proteins extracted with the new extraction buffer. The analytical performances of the 2 new ELISA kit series were evaluated in an interlaboratory study. Ten laboratories participated in the study and determined the major allergenic ingredients contained in 5 types of model processed food. The 2 ELISAs displayed fairly good reproducibility and sufficient recovery.