Chirality induction in cyclopolymerization. VI. Enantioselective cationic cyclopolymerization of divinyl ethers with chiral 10-camphorsulfonic acid/zinc chloride initiating system

Cyclopolymerization of benzaldehyde divinyl acetal ( 1 ) and 1,2-divinyloxybenzene ( 4 ) was carried out using (+)- or (−)-camphorsulfonic acid [(+)- or (−)- 2 ]/ZnCl₂ initiating system. Polymer 3 obtained from monomer 1 consisted essentially of cyclic repeating units, whereas polymer 5 from 4 possessed a small amount of residual vinyloxy groups. Both polymers 3 and 5 using (+)- 2 /ZnCl₂ showed optical activity with a negative sign of optical rotation. The molar optical rotation values of polymer 3 using ZnCl₂ · OEt₂ were larger than those using ZnCl₂. The CD spectra of the polymer with [Φ] = −30.1° ((−)- 3 ) and (4S,6S)-4,6-dimethyl-2-phenyl-1,3-dioxane showed a negative Cotton effect at 210 nm, whereas the polymer with [Φ] = +24.1° ((+)- 3 ) and (4R,6R)-4,6-dimethyl-2-phenyl-1,3-dioxane had mirror image CD curves with a positive Cotton effect at 210 nm. The absolute configurations of the major chiral cyclic units in (−)- and (+)- 3 were the SS- and RR-forms, respectively. © 1997 John Wiley & Sons, Inc.     

Garcinielliptone G from Garcinia subelliptica Induces Apoptosis in Acute Leukemia Cells

Cytotoxicity and apoptosis-inducing properties of compounds isolated from Garcinia subelliptica leaves were investigated. The hexane-soluble portion of MeOH extracts of G. subelliptica leaves that showed cytotoxic activity was separated to yield seven compounds 1–7. Chemical structure analysis using NMR spectroscopy and mass spectrometry confirmed that compound 1 was canophyllol, and compounds 2–7 were garcinielliptones N, O, J, G, F, and garcinielliptin oxide, respectively. Among them, garcinielliptone G (5) showed growth inhibition by causing apoptosis in THP-1 and Jurkat cells derived from human acute monocytic leukemia and T lymphocyte cells, respectively. Apoptosis induced by garcinielliptone G (5) was demonstrated by the detection of early apoptotic cells with fluorescein-labeled Annexin V and increases in cleaved caspase-3 and cleaved PARP protein levels. However, the addition of caspase inhibitor Z-VAD-FMK did not affect growth arrest or apoptosis induction. These results suggest that garcinielliptone G (5) can induce both caspase-3 activation and caspase-independent apoptosis. Therefore, garcinielliptone G (5) may be a potential candidate for acute leukemia treatment.     

Crystal Structures of Mono-, Di-, and Tri(p-tert-butyl)-thiacalix[4]arenes: Dimeric Self-inclusion Behavior

X-Ray crystal structures of the mono-, di-, and tri(p-tert-butyl)-substituted thiacalix[4]arenes (TC4As; 1, 2, and 3, respectively) have beendetermined. TC4As 1–3 adopt a cone conformation and form dimeric self-inclusion units in such a manner that phenol moieties are inserted into the cavity of each molecule. In all the crystal structures of 1–3, lateralface-to-face interactions exist between the phenol rings that do not bear a tert-butyl substituent, and seemingly, this molecular assembly stabilizes the formation of self-inclusion. TC4As 1 and 2 adopt a cone conformation with C₂ symmetry, leading to the formation of rim-to-rim intermolecular hydrogenbonds so as to link the dimeric units up and down. On the other hand, 3 adopts a regular cone conformation with C₄ symmetry to form cyclic hydrogen bonds withinthe rim part of TC4A.     

A GaCl3-catalyzed [4+1] cycloaddition of alpha,beta-unsaturated carbonyl compounds and isocyanides leading to unsaturated gamma-lactone derivatives

A GaCl3-catalyzed reaction of alpha,beta-unsaturated ketones with isocyanides leading to the formation of unsaturated lactone derivatives is described. This is the first example of the catalytic [4+1] cycloaddition of alpha,beta-unsaturated ketones and isocyanides. GaCl3 is an excellent catalyst due to its lower oxophilicity, which is desirable for all of the key steps, such as E/Z isomerization, cyclization, and deattachment from the products.     

The first halogen-substituted cyclotrigermenes: a unique halogen walk over the three-membered ring skeleton and facial stereoselectivity in the Diels-Alder reaction

Dark red crystals of the halogen-substituted cyclotrigermenes [(tBu3Si)3Ge3X; X = Cl, Br, I] were obtained in good yields by the reaction of [(tBu3Si)3Ge3]+.TTFPB- (TTFPB- = tetrakis(2,3,5,6-tetrafluorophenyl)borate) with potassium halides (KCl, KBr, or KI) in diethyl ether. The crystal structures of the halogen-substituted cyclotrigermenes reveal a cis-bent Ge=Ge double bond, caused by the introduction of the electronegative halogen atom on the sp3 germanium atom of cyclotrigermene. In solution, an intramolecular halogen migration over the three-membered ring skeleton was observed. Facial stereoselectivity in the Diels-Alder reaction of new cyclotrigermenes with 2,3-dimethyl-1,3-butadiene is also reported.     

Ion chromatographic system with a novel switching suppression device

Ion chromatography (IC) has been a powerful tool for measuring ionic species in environmental samples such as tap, river and drain waters. Suppressor modules (membrane and disposable column types) have been used for reducing the background of a baseline. A new type of suppressor device, which has a suppressor resin and switching valve was developed. Fresh ionic resin is introduced into a groove for each analysis to perform the suppression of the working eluent. The eluent composition for obtaining higher sensitivity and better resolutions among ionic species and carbonate ion was also investigated. Although carbonate buffers are used for ion separation in general, the separation of carbonate ion from other ions was not achieved. A borate eluent resulted in good resolutions and higher sensitivity. A new column was also developed for obtaining higher column efficiency and resolution. The optimization of anion separation using a new IC system (IC-2001) that consists of a new suppressor device, an anion-exchange column (TSKgel SuperIC-Anion, 150x4.6 mm), an autosampler, a conductivity cell and a pump in a compact module is described.     

Creation of hoop- and bowl-shaped benzenoid systems by selective detraction of [60]fullerene conjugation. [10]cyclophenacene and fused corannulene derivatives

Selective penta-addition of a methylcopper reagent followed by addition of a phenylcopper reagent to a suitably modified synthetic intermediate results in creation of 40pi-electron systems-hoop- and bowl-shaped cyclic benzenoid compounds, [10]cyclophenacene, and dibenzo-fused corannulene derivatives. The 40pi-electron cyclophenacene derivatives have been found to be chemically stable, yellow-colored, luminescent (560 nm), and EPR-silent. X-ray crystallographic analysis provided precision structural data sets. The dibenzo-fused corannulene derivatives exhibit blue-green (460 nm) to red (649 nm) fluorescence.     

Surface friction of hydrogels with well-defined polyelectrolyte brushes

Hydrogels of poly(2-hydroxyethyl methacrylate) (PHEMA) with well-defined polyelectrolyte brushes of poly(sodium 4-styrenesulfonate) (PNaSS) of various molecular weights were synthesized, keeping the distance between the polymer brushes constant at ca. 20 nm. The effect of polyelectrolyte brush length on the sliding friction against a glass plate, an electrorepulsive solid substrate, was investigated in water in a velocity range of 7.5 x 10(-5) to 7.5 x 10(-2) m/s. It is found that the presence of polymer brush can dramatically reduce the friction when the polymer brushes are short. With an increase in the length of the polymer brush, this drag reduction effect only works at a low sliding velocity, and the gel with long polymer brushes even shows a higher friction than that of a normal network gel at a high sliding velocity. The strong polymer length and sliding velocity dependence indicate a dynamic mechanism of the polymer brush effect.     

Novel carbohydrate-appended metal complexes for potential use in molecular imaging

Seven discrete sugar-pendant diamines were complexed to the {M(CO)(3)}(+) ((99m)Tc/Re) core: 1,3-diamino-2-propyl beta-D-glucopyranoside (L(1)), 1,3-diamino-2-propyl beta-D-xylopyranoside (L(2)), 1,3-diamino-2-propyl alpha-D-mannopyranoside (L(3)), 1,3-diamino-2-propyl alpha-D-galactopyranoside (L(4)), 1,3-diamino-2-propyl beta-D-galactopyranoside (L(5)), 1,3-diamino-2-propyl beta-(alpha-D-glucopyranosyl-(1,4)-D-glucopyranoside) (L(6)), and bis(aminomethyl)bis[(beta-D-glucopyranosyloxy)methyl]methane (L(7)). The Re complexes [Re(L(1)-L(7))(Br)(CO)(3)] were characterized by (1)H and (13)C 1D/2D NMR spectroscopy which confirmed the pendant nature of the carbohydrate moieties in solution. Additional characterization was provided by IR spectroscopy, elemental analysis, and mass spectrometry. Two analogues, [Re(L(2))(CO)(3)Br] and [Re(L(3))(CO)(3)Br], were characterized in the solid state by X-ray crystallography and represent the first reported structures of Re organometallic carbohydrate compounds. Conductivity measurements in H(2)O established that the complexes exist as [Re(L(1)-L(7))(H(2)O)(CO)(3)]Br in aqueous conditions. Radiolabelling of L(1)-L(7) with [(99m)Tc(H(2)O)(3)(CO)(3)](+) afforded in high yield compounds of identical character to the Re analogues. The radiolabelled compounds were determined to exhibit high in vitro stability towards ligand exchange in the presence of an excess of either cysteine or histidine over a 24 h period.     

Heck coupling reaction of iodobenzene and styrene using supercritical water in the absence of a catalyst

Heck coupling reaction of iodobenzene and styrene proceeds rapidly and selectively in supercritical water even without any catalyst in the presence of base. Both the choice of base and the reaction conditions had a significant effect on the conversion and the selectivity of the coupling products. The addition of a relatively mild base such as potassium acetate facilitated the cross-coupling reaction, while the hydrolysis of phenyl halide was favored in the presence of a strong base. The conversion and the yields of coupling products increased with increasing temperature, reaching a maximum at 650 K near the critical temperature of water, and then decreased as the temperature was further increased. Water density had a significant influence on the reaction rate, showing nearly 30% augmentation with a slight increase in density from 0.45 to 0.56 g cm(-3), but had less effect on the product selectivity. Two possibilities of the role of water responsible for the noncatalytic Heck coupling reaction in supercritical water, that is, ion and water-catalyzed mechanisms have been considered.