Monitoring nano-flow rate of water by atomic emission detection using helium radio-frequency plasma

Recently, high-performance nano-scale flow pumping systems have been developed for micro and miniaturized analysis systems. A novel device capable of measuring and monitoring nanoliter scale flow rates has been required for the further development of the pumping system. In this study, an atomic emission detector using helium radio-frequency plasma (RFP-AED) was used for the measurement of the nanoliter scale flow rate of water by quantitatively detecting the emission from hydrogen in the water molecules. Monitoring nano-flow rates of water in the range up to 1.0 microl min(-1), and the change in the flow rate by the indication of the ratio of the emissions of H (656.3 nm) and He (667.8 nm) were successful. At present, the lowest flow rate that could be determined reproducibly was 4 nl min(-1) calculated as five times the standard deviation of the background noise. Additionally, similar evaluations for the deviation of each flow rate by using the RFP-AED and a flow-injection system were produced.     

Photophysical properties of oligo(2,3-thienyleneethynylene)s

Photophysical properties of oligo(2,3-thienyleneethynylene)s (nTE, n denotes the number of thiophene rings, n = 2, 3) in benzene were investigated using steady-state, time-resolved fluorescence, and transient absorption spectroscopies. For 2TE, generation of the radiative S2 and nonradiative S1 states was confirmed. Upon excitation, the S2 state was initially generated and deactivated to the S1 state within 10 ps. The S1 state exhibited the transient absorption band at 470 nm, of which the lifetime was estimated to be 5.3 ns. In the case of 3TE, on the other hand, it was revealed that the radiative S1 state with a transient absorption peak at 650 nm was generated upon excitation. The T1 states of nTE were generated from the S1 states. The quantum yields were estimated to be 0.52 and 0.54 for 2TE and 3TE, respectively. Extremely fast reactions in the higher triplet excited state were indicated for both 2TE and 3TE.     

Alkane Oxidation with Molecular Oxygen Using a New Efficient Catalytic System: N-Hydroxyphthalimide (NHPI) Combined with Co(acac)(n)() (n = 2 or 3)

A novel class of catalysts for alkane oxidation with molecular oxygen was examined. N-Hydroxyphthalimide (NHPI) combined with Co(acac)(n)() (n = 2 or 3) was found to be an efficient catalytic system for the aerobic oxidation of cycloalkanes and alkylbenzenes under mild conditions. Cycloalkanes were successfully oxidized with molecular oxygen in the presence of a catalytic amount of NHPI and Co(acac)(2) in acetic acid at 100 degrees C to give the corresponding cycloalkanones and dicarboxylic acids. Alkylbenzenes were also oxidized with dioxygen using this catalytic system. For example, toluene was converted into benzoic acid in excellent yield under these conditions. Ethyl- and butylbenzenes were selectively oxidized at their alpha-positions to form the corresponding ketones, acetophenone, and 1-phenyl-1-butanone, respectively, in good yields. A key intermediate in this oxidation is believed to be the phthalimide N-oxyl radical generated from NHPI and molecular oxygen using a Co(II) species. The isotope effect (k(H)/k(D)) in the oxidation of ethylbenzene and ethylbenzene-d(10) with dioxygen using NHPI/Co(acac)(2) was 3.8.     

Large-scale separation of metallic and semiconducting single-walled carbon nanotubes

In the applications of single-walled carbon nanotubes (SWNTs), it is extremely important to separate semiconducting and metallic SWNTs. Although several methods have been reported for the separation, only low yields have been achieved at great expense. We show a separation method involving a dispersion-centrifugation process in a tetrahydrofuran solution of amine, which makes metallic SWNTs highly concentrated to 87% in a simple way.     

Effect of Organic Ligands Used in Sol-Gel Process on the Formation of Mullite

The preparation of mullite by the sol-gel method using organic polydentate ligands and the effect of the raw materials and organic polydentate ligands on the formation of mullite were investigated. Two series of samples were prepared using tetraethoxyorthosilicate (TEOS) and aluminum nitrate nonahydrate, or dibutoxyethylacetoacetatoaluminum (Al(OBu)₂(AcAcEt)) as the silica and alumina sources, respectively, and using ethylene glycol (EG), 1,3-propanediol (PD), 1,3-butanediol (BD), 2-methyl-2, 4-pentanediol (MPD), diethlene glycol monoethyl ether (DEME) and ethoxyethanol as the ligands. When the alumina source was aluminum nitrate nonahydrate, mullite was apt to appear in the order of EG>PD>MPD. When Al(OBu)₂(AcAcEt) was the alumina source, the tendency toward the appearance of mullite crystalline phase was EG>BD>DEME>MPD. Between the two alumina sources, aluminum nitrate nonahydrate gave mullite much easier than Al(OBu)₂(AcAcEt). These relationships were discussed from the viewpoints of the coordination ability of the ligands and the miscibility between the silica and alumina.     

Raman spectra of stilbene negative ions in tetrahydrofuran solution

Raman spectra of stilbene mono- and di-negative ions in tetrahydrofuran solution were obtained by Ar⁺ laser exciting lines. A considerable frequency shift was observed for several vibrations in the successive steps: stilbene → (stilbene)^? → (stilbene)^2?. The observed shift is discussed in a simple VB scheme, particularly in comparison with the results on anthracene negative ions. The resonance Raman effect was striking for both ions with intensity maxima at the exciting wavelengths close to the absorption maxima.     

A helical array of pendant fullerenes on a helical poly(phenylacetylene) induced by non-covalent chiral interactions

Novel [60]fullerene-based poly(phenylacetylene)s prepared by the copolymerization of achiral phenylacetylenes bearing a C(60) or crown ether pendant form a one-handed helix upon complexation with L- and D-alanine, yielding a helical array of the pendant fullerenes with a predominant screw-sense along the polymer backbone.     

Analysis of conjugated linoleic acids as 9-anthrylmethyl esters by reversed-phase high-performance liquid chromatography with fluorescence detection

A simple and highly sensitive method for determining the fatty acid composition of food lipids containing conjugated linoleic acid (CLA) is described. The method is based on the separation of the 9-anthrylmethyl ester derivatives of saturated and unsaturated (conjugated and non-conjugated) fatty acids by reversed-phase high-performance liquid chromatography with fluorescence detection. Just like the other fatty acids, CLA reacts readily with 9-anthryldiazomethane at room temperature to produce 9-anthrylmethyl esters without isomerization and decomposition of the conjugated double bonds. Clear resolution of the individual fatty acids as their 9-anthrylmethyl esters is achieved on a highly efficient octadecylsilylated silica column (150- x 3-mm i.d., 3-microm particle size) using a stepwise gradient elution with methanol-water. The method is standardized with commercially available CLA isomers (cis-9, trans-11 and trans-10, cis-12-octadecadienoic acids, and their cis,cis and trans,trans isomers) and applied for determination of the fatty acid compositions of milk and sdairy products.     

Determination of conjugated bile acids in human urine by high-performance liquid chromatography with chemiluminescence detection.

A qualitative and quantitative analysis of the conjugated 1 beta- and 6 alpha-hydroxy bile acids, including common bile acids, in human urine using high-performance liquid chromatography with chemiluminescence detection is described. After extraction of urine with C18 silica cartridges, the bile acids were separated into non-conjugated, glycine, taurine and sulphate fractions by ion-exchange chromatography on a lipophilic gel. Solvolysis of the sulphate was carried out by treatment with trifluoroethanol in acetone containing hydrochloric acid, and the liberated amino acid conjugates were fractionated again. The individual bile acids were separated on a reversed-phase C18 column (Bile Pak II), with detection by an immobilized 3 alpha-hydroxysteroid dehydrogenase enzyme reactor and chemiluminescence reaction of the generated NADH using 1-methoxy-5-methylphenazinium methylsulphate-isoluminol-microperoxidase system. The assay method showed the detection limits ranging from 8 to 250 pmol for the bile acids tested. Analysis of urine samples obtained from newborns, non-pregnant women and women in late pregnancy showed a large difference in bile acid composition and conjugation mode, suggesting that bile acid metabolism is different during fetal and neonatal periods.     

Phospholipases Induce Melanogenesis in Organ-Cultured Skin

Guinea pig skin becomes more pigmented following exposure to UV rays. This melanization was accompanied by enhanced intensity of tyrosinase-staining and increased number of tyrosinase-positive melanocytes (MEL^ty+), with resultant enhancement of melanin synthesis. To clarify the regulatory mechanism for melanization following UV irradiation, organ-cultured guinea pig skins have been used to examine their melanogenic responses to exogenous stimulation. This organ culture system responded well to UV irradiation, by increasing melanogenic activity. Also, in this system, phospholipases (PL), arachidonic acid, interleukin-1α and melanocytestimulating hormone, but not endothelin-1 or phosphatidylinositol-specific PLC (PI-PLC), stimulated melanogenesis to various extents as indicated by the number of MEL^ty+ and morphological changes. Among them, the PLA₂ and PLD were found to have a potent stimulatory property for melanocytes. They might affect melanocytes directly or indirectly through an effect on keratinocytes. These results suggest that PLA₂ and PLD play a key role in epidermal hyperpigmentation after UV irradiation or inflammation.