Oxidative degradation of poly(isophthaloylhydrazine‐1,2‐diyl)s

The condensation polymerization of isophthalodihydrazide and diphenyl isophthalate affords poly(isophthaloylhydrazine‐1,2‐diyl). High‐molecular‐weight poly(5‐tert‐butylisophthaloylhydrazine‐1,2‐diyl) is prepared by the polycondensation of 5‐tert‐butylisophthalodihydrazide and bis(4‐nitrophenyl) 5‐tert‐butylisophthalate in NMP at 100 °C. T_d of the poly(diacylhydrazine) is observed above 300 °C. No T_g is observed below T_d. The high‐molecular‐weight poly(diacylhydrazine) exhibits a film‐forming ability. The poly(diacylhydrazine) decomposes on treatment with an oxidant such as sodium hypochlorite solution to obtain the corresponding carboxylic acid and nitrogen. However, poly(diacylhydrazine) was stable to oxygen and hydrogen peroxide even in the presence of transition metal ions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6255–6262, 2008     

Allylation of methylenecyclopropanes with allylindium reagents

Methylenecyclopropanes carrying a hydroxymethyl group at the ring underwent stereoselective allylindation with allylindium sesquiiodide to afford the allylated products, in which the allyl group was delivered at the external sp² carbon via cyclopropylindium intermediates. The reaction of ethyl 2-cyclopropylideneacetate and triallylindium afforded the 1,4-adduct along with dimeric products.     

Living cationic polymerization of 2‐adamantyl vinyl ether

Living cationic polymerization of 2‐adamantyl vinyl ether (2‐vinyloxytricyclo[3.3.1.1]^3,7decane; 2‐AdVE) was achieved with the CH₃CH(OiBu)OCOCH₃/ethylaluminum sesquichloride/ethyl acetate [CH₃CH(OiBu)OCOCH₃/Et_1.5AlCl_1.5/CH₃COOEt] initiating system in toluene at 0 °C. The number‐average molecular weights (M_n's) of the obtained poly(2‐AdVE)s increased in direct proportion to monomer conversion and produced the polymers with narrow molecular weight distributions (MWDs) (M_w/M_n = ～1.1). When a second monomer feed was added to the almost polymerized reaction mixture, the added monomer was completely consumed and the M_n's of the polymers showed a direct increase against conversion of the added monomer. Block and statistical copolymerization of 2‐AdVE with n‐butyl vinyl ether (CH₂?CH? O? CH₂ CH₂CH₂CH₃; NBVE) were possible via living process based on the same initiating system to give the corresponding copolymers with narrow MWDs. Grass transition temperature (T_g) and thermal decomposition temperature (T_d) of the poly(2‐AdVE) (e.g., M_n = 22,000, M_w/M_n = 1.17) were 178 and 323 °C, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1629–1637, 2008     

Enantioselective total synthesis of sacrolide A

An enantioselective total synthesis of sacrolide A, an antimicrobial and cytotoxic fourteen-membered macrolactonic oxylipin isolated from an edible freshwater cyanobacterium, has been accomplished from a known carboxylic acid in 20% overall yield by a concise ten-step sequence. The key transformations include chiral oxazolidinone-based diastereoselective installation of two hydroxy-bearing stereocenters, the Horner–Wadsworth–Emmons olefination to construct the full carbon skeleton, and the Shiina macrolactonization to establish the fourteen-membered macrolide structure.     

Test of athermal terms of activity coefficient models by Monte Carlo simulation with hard-core models

The infinite dilution activity coefficients of exactly athermal fluids were calculated by Monte Carlo simulation with hard-core models. The hard-core models used in this work were hard-sphere and hard-spherocylinder models. The Widom test particle method was adopted to calculate the residual chemical potentials of solutes in pure solvent and in pure solute solutions. The infinite dilution activity coefficients of solutes were obtained from the residual chemical potentials of solutes. The infinite dilution activity coefficients calculated by Monte Carlo simulation were compared with those of athermal terms in activity coefficient equations. Staverman–Guggenheim equation overestimates the activity coefficients. The deviations of activity coefficients increase with increasing the hard-core volume of solute. Flory–Huggins equation based on molar volume gives good results for the hard-spherocylinder systems. Elbro-FV equation gives good results for both the hard-sphere and hard-spherocylinder systems.     

Incommensurate magnetism in FeAs strips: neutron scattering from CaFe(4)As(3)

Magnetism in the orthorhombic metal CaFe(4)As(3) was examined through neutron diffraction for powder and single crystalline samples. Incommensurate [q(m) ≈ (0.37-0.39) × b*] and predominantly longitudinally (|| b) modulated order develops through a 2nd order phase transition at TN = 89.63(6) K with a 3D Heisenberg-like critical exponent β = 0.365(6). A 1st order transition at T2 = 25.6(9) K is associated with the development of a transverse component, locking q(m) to 0.375(2)b*, and increasing the moments from 2.1(1) to 2.2(3) μ B for Fe2+ and from 1.3(3) to 2.4(4) μB for Fe+. The ab initio Fermi surface is consistent with a nesting instability in cross-linked FeAs strips.     

Near-surface structural study of transition metal oxides to understand their electronic properties

The atomic arrangement in a solid contains a great amount of information, and observation of its structure is essential for understanding the electronic and magnetic properties of transition metal oxides at a microscopic level. Increasing interest in the surfaces and interfaces of oxide systems, which is partly driven by the anticipation of device applications, enhances the importance of structural studies of the near-surface region. We review various types of structural studies with x-ray scattering on the near-surface region of metal oxides-from thick films to surfaces-in order to clarify the structural effects on their electronic properties.     

Effect of cation doping on ionic and electronic properties for lanthanum silicate-based solid electrolytes

Electronic as well as ionic conducting properties for oxyapatite-type solid electrolytes based on lanthanum silicate, La_9.333 + xSi₆O_26 + 1.5x (LSO) were investigated in the oxygen-excess region (x > ca. 0.3). We have found that the oxygen excess-type LSO (OE-LSO), namely La₁₀Si₆O₂₇ on weighted basis, exhibited high conductivity, and substitution of the Si-site of LSO with some dopants (Mⁿ⁺) had a positive effect toward the conducting property. Furthermore, it was also found that addition of a very small amount of iron ions into the M-doped OE-LSO, La₁₀(Si_6-yMⁿ⁺_y)O_27-(2-0.5n)y, improved its conductivity. On the other hand, replacement of the La-site with various ions for La₁₀(Si_6-yMⁿ⁺_y)O_27-(2-0.5n)y did little to improve conductivity. The electronic transport numbers for Al-doped OE-LSO with Fe-addition, (1-α){La₁₀(Si_5.8Al_0.2)O_26.9}-α(FeO_γ), evaluated with the Hebb-Wagner polarization method were very low: i.e., 1.1 × 10^− 3 and 2.9 × 10^− 3 under P(O₂) = 1.1 × 10⁴ Pa at 1073 K for α = 0.00 and 0.005, respectively. Conductivity for each sample was unchanged under humidified atmosphere at 1073 K sustained for over 50 h, revealing that both compositions were chemically stable. It was concluded that 0.995{La₁₀(Si_5.8Al_0.2)O_26.9}-0.005(FeO_γ) is suitable for the fuel cell electrolytes because of its high and almost pure ionic conductivity, and its good chemical stability under humidified as well as reducing conditions.     

Compounds having thiourea moiety as derivatization reagents in liquid chromatography/electrospray ionization–tandem mass spectrometry (LC/ESI‐MS/MS): synthesis of derivatization reagents for carboxylic acids

The derivatization reagents for carboxylic acids, N‐(Pyridin‐3‐yl)hydrazinecarbothioamide, N‐[4‐(dimethylamino)phenyl]hydrazinecarbothioamide, 1‐(2‐aminoethyl)‐3‐(pyridin‐3‐yl)thiourea, 1‐(2‐aminoethyl)‐3‐[4‐(dimethylamino)phenyl]thiourea and 4‐(2‐aminoethyl)‐N‐phenylpiperazine‐1‐carbothioamide were synthesized. These reagents reacted with carboxylic acids at 60°C for 45 min in the presence of the condensation reagents. The generated derivatives were favorably separated on the reversed‐phase column and sensitively detected by electrospray ionization tandem mass spectrometry. These reagents enhanced the electrospray ionization response of the analyte and generated a particular product ion efficiently by collision‐induced dissociation, and thus they were suitable for MS/MS detection. Copyright © 2010 John Wiley & Sons, Ltd.