Adsorption of ammonia and water on functionalized edge-rich carbon nanofibers

The preparation, characterization and ammonia and water adsorption properties of edge-rich carbon nanofibers (CNFs) were studied, including platelet CNFs (PCNFs) and cup-stacked CNFs (CSCNFs). Since PCNFs and CSCNFs have many chemically active exposed edges, functionalization by oxidizing the edges was carried out by ozone stream and by nitric acid. Transmission electron microscopy, N₂ adsorption isotherms and temperature-programmed desorption analysis showed that the nitric acid treatment partly destroyed the graphite structure of the PCNFs and created acid functional groups and micropores, whereas the ozone treatment created functional groups without damaging the structure. Ammonia adsorption isotherms clarified that NH₃ adsorption on PCNFs and CSCNFs occurred mainly on oxygen-containing groups, whereas the adsorption on activated carbon fibers (ACFs) occurred on both oxygen-containing groups and the carbon surface without the functional groups, and the CSCNFs showed larger amounts of adsorbed ammonia compared to the PCNFs. Especially at a relatively low pressure range (<0.2 atm), the PCNFs/CSCNFs/ACFs showed the same ammonia adsorption mechanism; that is, the one-to-one interaction between oxygen atoms in the functional groups and hydrogen atoms in ammonia molecules. In addition, the adsorption on the ACFs appeared to occur mainly by interaction with the carbon surface at relatively high pressure (0.3–1.0 atm). Our experimental results and previous findings suggest that NH₃ adsorption on PCNFs is due mainly to NH…O hydrogen bonding between oxygen-containing groups and ammonia rather than to chemical bonding.     

Reinvestigation of palladium-catalyzed allylation of the monoacetate of 4-cyclopentene-1,3-diol and synthesis of the coronafacic acid ethyl ester

A larger quantity of a β-keto ester that is 1.5–1.7 equiv more than the base (t-BuOK, NaH) was found to be essential in securing sufficient yields of the products in the palladium-catalyzed allylic substitution of the monoacetate of 4-cyclopentene-1,3-diol with β-keto esters. This requirement also works well for substitutions with the TBS ether of the monoacetate and the monoacetate of 2-cyclohexene-1,4-diol. As an application, the coronafacic acid ethyl ester was synthesized as an optically active form.     

Cyclic sample pooling using two‐dimensional liquid chromatography system enhances coverage in shotgun proteomics

We report a cyclic sample pooling technique devised in two‐dimensional liquid chromatography–electrospray ionization mass spectrometry (LC‐ESI‐MS) shotgun proteomics that renders deeper proteome coverage; we combined low pH reversed‐phase (RP) LC in trifluoroacetic acid in the first dimension, followed by cyclic sample pooling of the eluate and low‐pH RP‐LC in formic acid in the second dimension. The new protocol has a significantly higher resolving power suitable for LC‐ESI‐MS/MS shotgun proteomics. Copyright © 2013 John Wiley & Sons, Ltd.     

Multifunctional Core‐Shell‐Corona‐Type Polymeric Micelles for Anticancer Drug‐Delivery and Imaging

We have developed core‐shell‐corona‐type polymeric micelles that can integrate multiple functions in one system, including the capability of accommodating hydrophobic dyes into core and hydrophilic drug into the shell, as well as pH‐triggered drug‐release. The neutral and hydrophilic corona sterically stabilizes the multifunctional polymeric micelles in aqueous solution. The mineralization of calcium phosphate (CaP) on the PAA domain not only enhances the diagnostic efficacy of organic dyes, but also works as a diffusion barrier for the controlled release.     

Single‐Electron‐Transfer (SET)‐Induced Oxidative Biaryl Coupling by Polyalkoxybenzene‐Derived Diaryliodonium(III) Salts

Metal‐free oxidative C? C coupling by using polyalkoxybenzene‐derived diaryliodonium(III) salts as both the oxidant and aryl source has been developed. These salts can induce single‐electron‐transfer (SET) oxidation to yield electron‐rich arenes and subsequently transfer the polyalkoxyphenyl group into in situ generated aromatic radical cations to produce biaryl products. The reaction is promoted by a Lewis acid that activates the iodonium salts. It has been revealed that the reactivity of the salts under acidic conditions is quite different to their known behavior under basic conditions. The reactivity preference of a series of iodonium salts in the SET oxidation and their ligand transfer abilities have been systematically investigated and the results are summarized in this report.     

Temperature dependence of free volume of polyacrylamide gels studied by positron lifetime measurements

Changes of positronium (Ps) cavity radii in polyacrylamide and poly(N-isopropylacrylamide) gels were studied from 120 to 300 K by positron lifetime technique and it has been shown that the Ps cavity radius in the hydrogels changes by three or four stages. Temperature dependence of the Ps cavity radius exhibits variations similar to common polymers around the glass transition temperature. Hydrophilicity of the polymer chains significantly affects the Ps cavity radius just below 273 K. These results suggest an important role of free volume on the state of water in hydrogels.     

Extending the possibility of an N-Troc-protected sialic acid donor toward variant sialo-glycoside synthesis

The potential of an N-Troc-protected sialic acid donor, equipped with phenylsulfenyl functionality as a leaving group, has been explored. As a result, the entitled donor was proven to be highly reactive and to have broad applicability toward the synthesis of variant sialo-glycans, which have N-glycolyl, de-N-acetyl, 1,5-lactam and 8-O-sulfo sialic acid analogs.     

Fine Pore-Structure Engineering by Ligand Conformational Control of Naphthalene Diimide-Based Semiconducting Porous Coordination Polymers for Efficient Chemiresistive Gas Sensing

Exploring new porous coordination polymers (PCPs) that have tunable structure and conductivity is attractive but remains challenging. Herein, fine pore structure engineering by ligand conformation control of naphthalene diimide (NDI)-based semiconducting PCPs with π stacking-dependent conductivity tunability is achieved. The π stacking distances and ligand conformation in these isoreticular PCPs were modulated by employing metal centers with different coordination geometries. As a result, three conjugated PCPs (Co−pyNDI, Ni−pyNDI, and Zn−pyNDI) with varying pore structure and conductivity were obtained. Their crystal structures were determined by three-dimensional electron diffraction. The through-space charge transfer and tunable pore structure in these PCPs result in modulated selectivity and sensitivity in gas sensing. Zn−pyNDI can serve as a room-temperature operable chemiresistive sensor selective to acetone.     

All-Solid-State Rechargeable Air Batteries Using Dihydroxybenzoquinone and Its Polymer as the Negative Electrode

A proof-of-concept study was conducted on an all-solid-state rechargeable air battery (SSAB) using redox-active 2,5-dihydroxy-1,4-benzoquinone (DHBQ) and its polymer (PDBM) and a proton-conductive polymer (Nafion). DHBQ functioned well in the redox reaction with the solid Nafion ionomer at 0.47 and 0.57 V vs. RHE, similar to that in acid aqueous solution. The resulting air battery exhibited an open circuit voltage of 0.80 V and a discharge capacity of 29.7 mAh g_DHBQ⁻¹ at a constant current density (1 mA cm⁻²). With PDBM, the discharge capacity was much higher, 176.1 mAh g_PDBM⁻¹, because of the improved utilization of the redox-active moieties. In the rate characteristics of the SSAB-PDBM, the coulombic efficiency was 84 % at 4 C, which decreased to 66 % at 101 C. In a charge/discharge cycle test, the capacity remaining after 30 cycles was 44 %, which was able to be significantly improved, to 78 %, by tuning the Nafion composition in the negative electrode.     

Tin(II)-Based Metal–Organic Frameworks Enabling Efficient,Selective Reduction of CO2 to Formate under Visible Light

Certain metal complexes are known as high-performance CO₂ reduction photocatalysts driven by visible light. However, most of them rely on rare, precious metals as principal components, and integrating the functions of light absorption and catalysis into a single molecular unit based on abundant metals remains a challenge. Metal-organic frameworks (MOFs), which can be regarded as intermediate compounds between molecules and inorganic solids, are potential platforms for the construction of a simple photocatalytic system composed only of Earth-abundant nontoxic elements. In this work, we report that a tin-based MOF enables the conversion of CO₂ into formic acid with a record high apparent quantum yield (9.8 % at 400 nm) and >99 % selectivity without the need for any additional photosensitizer or catalyst. This work highlights a new MOF with strong potential for photocatalytic CO₂ reduction driven by solar energy.