Eu(III) emission band changes caused by peripheral C-H/O hydrogen bonding

We synthesized Eu(III) and Sm(III) complexes with tridentate phosphine oxide ligands, Eu(hfa)(3)(TPPM) and Sm(hfa)(3)(TPPM) (hfa: hexafluoroacetylacetonato, TPPM: tris(diphenylphosphinyl)methane), and we then examined their luminescent properties. In the complexes the Eu(III) and Sm(III) centres were fully surrounded by low-vibrational frequency ligands, which led to relatively high emission quantum yields (Φ(Eu) = 30%, Φ(Sm) = 4.7%). The X-ray single crystal structures of the Eu(hfa)(3)(TPPM) revealed nona-coordinated Eu(III) complexes and C-H/O hydrogen bonding formations between the acidic hydrogen atom of the TPPM ligand and oxygen atoms of solvent molecules. The C-H/O hydrogen bonding slightly affected the coordination structure around the Eu(III) ion. Despite the seemingly small effect on the structural change, because the emission band profile of the (5)D(0)→(7)F(2) transition is sensitive to changes in the coordination environment of the Eu(III) complex, we observed a red shift in the emission spectral line.     

Label-free molecular beacon system based on DNAs containing abasic sites and fluorescent ligands that bind abasic sites

A new class of label-free molecular beacon (MB) system based on DNA strands that contain abasic (AP) sites (AP-DNA) and adopt stem-loop structures, in combination with fluorescent ligands that bind these AP sites, has been developed. Unlike a conventional MB, which requires covalent labeling of the MB with a fluorophore and a quencher, the developed system (APMB) does not require covalent attachment of signal transduction units. Detailed sensing functions of a series of APMB systems were examined with the aid of the fluorescent ligand named ATMND to provide insight into the design strategy for APMB systems. The effects of the stem length and the position of the AP site in the stem moiety on the fluorescence response of the APMB system were examined. Genotyping of a G/C SNP of PCR amplification products was successfully demonstrated with the APMB system and blue-fluorescent ATMND as a ligand. The APMB system was further extended to a system that utilized green-fluorescent lumiflavin.     

Shape- and size-controlled synthesis in hard templates: sophisticated chemical reduction for mesoporous monocrystalline platinum nanoparticles

Here we report a novel hard-templating strategy for the synthesis of mesoporous monocrystalline Pt nanoparticles (NPs) with uniform shapes and sizes. Mesoporous Pt NPs were successfully prepared through controlled chemical reduction using ascorbic acid by employing 3D bicontinuous mesoporous silica (KIT-6) and 2D mesoporous silica (SBA-15) as a hard template. The particle size could be controlled by changing the reduction time. Interestingly, the Pt replicas prepared from KIT-6 showed polyhedral morphology. The single crystallinity of the Pt fcc structure coherently extended over the whole particle.     

Carboxylic acid recognition of diamidine having a fluorescent 1,8-diphenylanthracene unit and its detection of amidinium-carboxylate and amidinium formation

A diphenylanthracene-based diamidine (1a) fluorescent probe for the detection of dicarboxylic acids has been designed and synthesized, which has an extended π-conjugation rather than a simple anthracene ring, in order to observe highly different fluorescence wavelengths after complex formation with dicarboxylic acids. The fluorescence spectra of the mixed solution of the diamidine 1a and carboxylic acids showed two different fluorescence bands, which corresponded to the complex formation (amidinium-carboxylate formation, λ_em?=?450?nm, light blue color) and dissociated amidinium formation (λ_em?=?510?nm as a broad band, green color). The complexed and dissociated states were confirmed by DOSY NMR and TD-DFT calculations. These different fluorescence wavelengths may come from the differences in the dihedral angles between the phenyl rings at the 1,8-position and anthracene ring (difference in π-conjugation) of 1a under complex formation and dissociated amidinium formation. The proposed mechanism for the observation of the different fluorescence wavelengths (complex formation and amidinium formation) was also confirmed by the fluorescence study of diamidine 1b which causes restricted rotation of the phenyl rings by substitution of the steric methyl groups, and observed the same fluorescence spectra for the complex formation and amidinium formation (400, 420, 450?nm as a vibrational structure of anthracene ring). These fluorescence characteristics of the diamidine 1a are also applicable for the detection of α,ω?dicarboxylic acids.     

Phase-separation and distribution of phenyl groups for PhTES-TEOS coatings prepared on polycarbonate substrate

Phenyltriethoxysilane (PhTES) and tetraethoxysilane (TEOS) coatings [xPhTES·(100 − x)TEOS (mol%)] (x = 0 − 80) were prepared on polycarbonate (PC) substrate, and adhesion, surface hardness and distribution of phenyl groups were studied. The coatings with more than 60 mol% of PhTES showed good adhesion (≈ 100%), and the pencil hardness of PC substrate (4B) improved to 2B or B after the coatings. Bulk gels with the same compositions were also prepared, and distribution of phenyl groups were estimated using fourier transform infrared (FT-IR) spectroscopy (KBr method for bulk gels and attenuated total reflection (ATR) method for coatings). A significant difference for the distribution of phenyl groups was clearly observed between bulk gels and coatings, suggesting PC substrate affects the distribution of phenyl groups in coatings. The adhesion and FTIR results revealed that there is an interaction caused by π-electrons between benzene rings on PC substrate and phenyl groups of PhTES-TEOS coatings. It was found that the adhesion was strongly correlated with the phenylsilsesquioxane networks formed around PC substrate side.     

Visible light-responsive cell scaffolds with bilayer structures for single cell separation

Collagen is a major component of the extracellular matrix, and collagen gels have been used as cell scaffolds. We previously prepared gold nanoparticle (AuNP)-embedded collagen gels (AuCol) to serve as cell scaffolds that were sensitive to visible light. We performed single cell detachment from this cell scaffold using a microscope equipped with a laser irradiation system. In the present study, we adjusted hydrogel thickness and AuNP concentration in AuCol, with a goal of improving cell detachment efficiency. Thin hydrogels became blackened after the laser irradiation, and thick hydrogels with high AuNP concentrations were not permeable to the laser light. We, therefore, prepared bilayer gels, composed of AuCol as the upper layer and intact collagen gel (Col) as the bottom layer. These bilayer gels allowed more effective cell detachment, because they were thick and optically transparent. Our results indicated that an AuCol/Col ratio of 2 enabled the highest cell detachment efficiency. Essentially, no cell damage was observed in our system, suggesting that this is a cell-friendly single cell separation system.     

Rationally Designed Semisynthetic Natural Product Analogues for Stabilization of 14‐3‐3 Protein–Protein Interactions

The natural product family of fusicoccanes are stabilizers of 14‐3‐3 mediated protein–protein interactions (PPIs), some of which possess antitumor activity. In this study, the first use of molecular dynamics (MD) to rationally design PPI stabilizers with increased potency is presented. Synthesis of a focused library, with subsequent characterization by fluorescence polarization, mutational studies, and X‐ray crystallography confirmed the power of the MD‐based design approach, revealing the potential for an additional hydrogen bond with the 14‐3‐3 protein to lead to significantly increased potency. Additionally, these compounds exert their action in a cellular environment with increased potency. The newly found polar interaction could provide an anchoring point for new small‐molecule PPI stabilizers. These results facilitate the development of fusicoccanes towards drugs or tool compounds, as well as allowing the study of the fundamental principles behind PPI stabilization.     

Liquid crystal gels cross-linked with 1,3,5-tris-(ω-methacryloyloxyalkyloxy)benzenes

A mixture of ω-(4-cyanobiphenyl-4′-yloxy)alkyl methacrylate and 1,3,5-tris-(ω-methacryloyloxyalkyloxy)benzene was heated to 200 °C at 5–10 °C/min. A large, broad exothermic transition peak was observed by differential scanning calorimetry during the first heating process. The transition indicated the formation of a networked polymer, which was then immersed for 24 h in various nematic liquid crystals, such as 4-cyano-4′-pentylbiphenyl, to give liquid crystal gels. The networked polymers and their corresponding liquid crystal gels exhibited different liquid crystal-isotropic transitions. The swelling behaviors of the liquid crystal gels were compared with those of gels cross-linked with 1,6-hexanediol dimethacrylate, trimethylpropane trimethacrylate, and pentaerythritol tetraacetate. The characteristics of liquid crystal gels cross-linked with 1,3,5-tris-(ω-methacryloyloxyalkyloxy)benzenes were studied.     

High-pressure hydrothermal crystal growth and multiferroic properties of a perovskite YMnO3

Orthorhombic perovskites RMnO(3) are representative of spin-driven ferroelectrics. When the radius of the rare-earth ion R is smaller than that of Dy, for instance in YMnO(3), the orthorhombic phase becomes metastable at ambient pressure, which impedes the crystal growth; thus, the detailed magnetic and multiferroic properties of the metastable phase have not been characterized. In this work, we successfully obtained single crystals of orthorhombic YMnO(3) using quasi-hydrothermal conditions under a high pressure of 5.5 GPa. Magnetic and dielectric measurements under magnetic fields revealed that the magnetic ground state is the commensurate E-type antiferromagnetic, while a cycloidal spin phase likely coexists in the intermediate temperature range, which enhances the magnetoelectric response to external fields.     

Crystal structure of a ten-amino acid protein

What is the smallest protein? This is actually not such a simple question to answer, because there is no established consensus among scientists as to the definition of a protein. We describe here a designed molecule consisting of only 10 amino acids. Despite its small size, its essential characteristics, revealed by its crystal structure, solution structure, thermal stability, free energy surface, and folding pathway network, are consistent with the properties of natural proteins. The existence of this kind of molecule deepens our understanding of proteins and impels us to define an "ideal protein" without inquiring whether the molecule actually occurs in nature.