Minimization of Interferences in Flow Injection Amperometric Glucose Biosensor Based on Oxidation of Enzymatically‐produced H2O2

One of the major problems in amperometric biosensors based on detection of H₂O₂ produced by enzymatic reaction between oxidase enzymes and substrate is the interference of redox active compounds such as ascorbic acid (AA), dopamine (DA) and uric acid (UA). To minimize these interferences, sodium bismuthate was used for the first time as an insoluble pre‐oxidant in the flow injection (FI) amperometric glucose biosensor at a Glucose oxidase (GOx) immobilized Pt/Pd bimetallic modified pre‐anodized pencil graphite electrode (p.PGE). In this context, these interfering compounds were injected into a flow injection analysis (FIA) system using an injector which was filled with NaBiO₃. Thus, these interferents were converted into their redox inactive oxidized forms before reaching the electrode in the flow cell. While glucose was not influenced by the pre‐oxidant in the injector, the huge oxidation peak currents of the interferents decreased significantly in the biosensor. FI amperometric current time curves showed that the AA, DA and UA were minimized by 96 %, 86 %, and 98 % respectively, in the presence of an equivalent concentration of interferences in a 1.0 mM glucose solution. The proposed FI amperometric glucose biosensor exhibits a wide linear range (0.01–10 mM, R²=0.9994) with a detection limit of 2.4×10^?3 mM. Glucose levels in the artificial serum and two real samples were successfully determined using the fabricated FI amperometric biosensor.     

Defect engineering of ZnO

The defect responsible for the transparent to red color change of nominally undoped ZnO bulk single crystals is investigated. Upon annealing in the presence of metallic Zn as reported by Halliburton et al. and also Ti and Zr a native defect forms with an energy level about 0.7 eV below the conduction band. This change is reversible upon annealing in oxygen. Optical transmission data along with positron depth profiles and annealing studies are combined to identify the defect as oxygen vacancies. Vacancy clustering occurs at about 500 °C if isolated zinc and oxygen vacancies. In the absence of zinc vacancies, clusters form at about 800 °C.     

Neutron diffraction study of quasi-one-dimensional spin-chain compounds Ca<Subscript>3</Subscript>Co<Subscript>2–<Emphasis Type="Italic">x</Emphasis></Subscript>Fe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>6</Subscript>

We report the results of the DC magnetization, neutron powder diffraction and neutron depolarization studies on the spin-chain compounds Ca₃Co_2–x Fe _x O₆ (x = 0, 0.1, 0.2 and 0.4). Rietveld refinement of neutron powder diffraction patterns at room temperature confirms the single-phase formation for all the compounds in rhombohedral structure with space group Rc. Rietveld refinement also confirms that Fe was doped at the trigonal prism site, 6a (0, 0, 1/4) of Co. The high temperature magnetic susceptibility obeys the Curie-Weiss law; the value of the paramagnetic Curie temperature (θ _p) decreases as the concentration of iron increases and it becomes negative for x = 0.4. No extra Bragg peak as well as no observable enhancement in the intensity of the fundamental (nuclear) Bragg peaks has been observed in the neutron diffraction patterns down to 30 K. No depolarization of neutron beam has been observed down to 3 K confirming the absence of ferro- or ferrimagnetic-like correlation.      

Diethoxy‐azobis(pyridinium) Salt as Photoinitiator for Cationic Polymerization: Towards Wavelength Tunability by Cis–Trans Isomerization

N,N′‐diethoxy‐4,4′‐azobis(pyridinium) hexafluorophosphate (DEAP) has been synthesized by alkylation of the corresponding N‐oxide and characterized. DEAP exhibits UV induced cis–trans isomerization with absorptions at around λ = 459 and 360 nm, respectively. The ability of the DEAP ion to act as a photoinitiator for the cationic polymerization of cyclohexene oxide and N‐vinylcarbazole is demonstrated. The initiation step involves the decay of the excited state of the trans form of the salt with homolytic bond rupture of the nitrogen–oxygen bond. Its potential use as a photoinitiator for free radical polymerization is also demonstrated using methyl methacrylate monomer as the example.

     

Mesenchymal Stem Cells: a Promising Therapeutic Tool for Acute Kidney Injury

Applied Biochemistry and Biotechnology - Acute kidney injury (AKI) is a rapid loss of renal function. It has high mortality rates. Still, renal replacement therapy is considered the best solution...     

Optimization of the finned double-pipe heat exchanger using nanofluids as working fluids

Journal of Thermal Analysis and Calorimetry - The heat exchanger pipe diameter has a significant effect on the flow characteristics as well as on the initial investment, operation and overall cost....     

Self‐healing of poly(propylene oxide)‐polybenzoxazine thermosets by photoinduced coumarine dimerization

In this work, a self‐healing strategy for poly(propylene oxide)s bearing coumarine‐benzoxazine units (PPO‐CouBenz)s based on light induced coumarine dimerization reactions is described. Four different types of poly(propylene oxide) amines with molecular weights ranging from 440 to 5000 Da were reacted with formaldehyde and 4‐methyl‐7‐hydroxycoumarin to yield desired (PPO‐CouBenz)s. The crosslinked polymer films were prepared by solvent casting of various compositions of PPO‐CouBenzs in chloroform followed by thermal ring opening reaction of benzoxazine groups at 210–240 °C. Thermal curing and thermal stability of the initial PPOs and final products were investigated. Using allyl benzoxazine in the formulation, it was demonstrated that the toughness of the films was improved. Photoinduced healing of coumarin‐based cured PPO‐CouBenz polymer films was investigated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2911–2918     

Electrical and photoelectrical behaviour of heterojunctions based on novel oligomeric metal complexes

Naringenin‐based Schiff base ligands with 4‐aminobenzoic hydrazide were obtained as a unilateral form ( L¹ ). The ligand was oligomerized by oxidative polycondensation reaction with NaOCl as an oxidant in an aqueous alkaline medium at 90 °C to form a functional oligomer ( L² ), and its transition metal complexes such as those with Cu(II), Ni(II) and Zn(II) were prepared. The monomer and the oligomeric compounds were characterized using various techniques. Optical and electrical properties of the complexes were also investigated. All compounds showed indirect band gaps and they can be accepted as being in the semiconductor class. Organic–inorganic hybrid devices were obtained using n‐Si inorganic semiconductor and the complexes. The characteristic parameters of the devices were determined using current–voltage (I–V) and capacitance–voltage measurements in the dark. Photoelectrical properties of the devices were investigated using I–V measurements under a solar simulator with an AM1.5 global filter. Copyright © 2015 John Wiley & Sons, Ltd.     

Flat sheet direct contact membrane distillation desalination system using temperature-dependent correlations: thermal efficiency via a multi-parameter sensitivity analysis based on Monte Carlo method

Journal of Thermal Analysis and Calorimetry - In this paper, a 1D model of direct contact membrane distillation is presented in which all fluid properties are temperature-dependent. In addition, a...