Ligand binding properties of myoglobin reconstituted with iron porphycene: unusual O2 binding selectivity against CO binding

Sperm whale myoglobin, an oxygen storage hemoprotein, was successfully reconstituted with the iron porphycene having two propionates, 2,7-diethyl-3,6,12,17-tetramethyl-13,16-bis(carboxyethyl)porphycenatoiron. The physicochemical properties and ligand bindings of the reconstituted myoglobin were investigated. The ferric reconstituted myoglobin shows the remarkable stability against acid denaturation and only a low-spin characteristic in its EPR spectrum. The Fe(III)/Fe(II) redox potential (-190 mV vs NHE) determined by the spectroelectrochemical measurements was much lower than that of the wild-type. These results can be attributed to the strong coordination of His93 to the porphycene iron, which is induced by the nature of the porphycene ring symmetry. The O2 affinity of the ferrous reconstituted myoglobin is 2600-fold higher than that of the wild-type, mainly due to the decrease in the O2 dissociation rate, whereas the CO affinity is not so significantly enhanced. As a result, the O2 affinity of the reconstituted myoglobin exceeds its CO affinity (M' = K(CO)/K(O2) < 1). The ligand binding studies on H64A mutants support the fact that the slow O2 dissociation of the reconstituted myoglobin is primarily caused by the stabilization of the Fe-O2 sigma-bonding. The IR spectra for the carbon monoxide (CO) complex of the reconstituted myoglobin suggest several structural and/or electrostatic conformations of the Fe-C-O bond, but this is not directly correlated with the CO dissociation rate. The high O2 affinity and the unique characteristics of the myoglobin with the iron porphycene indicate that reconstitution with a synthesized heme is a useful method not only to understand the physiological function of myoglobin but also to create a tailor-made function on the protein.     

The interfacial dilational properties of hydrophobically modified associating polyacrylamide studied by the interfacial tension relaxation method at an oil-water interface

The interfacial dilational viscoelastic properties of hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2-phenoxylethyl acrylate (POEA) (<1.0 mol%) at the octane-water interfaces were studied by means of the interfacial tension relaxation method. The dependencies of interfacial dilational elasticity and viscous component on the dilational frequency were investigated. The interaction of hydrophobically associating block copolymer [P(AM/POEA)] with sodium dodecyl sulfate (SDS) has been explored. The results show that at lower frequency, the dilational elasticity for different concentration copolymer is close to zero; at higher frequency, the dilational elasticity shows no change with increased frequency; At moderate frequency (10(-3)-1 Hz), the dilational elasticity decreased with a decrease in the dilational frequency. The results show that the hydrophobic groups of [P(AM/POEA)] chains can be associated by inter- or intrachain liaisons in water solution. The dilational viscous component for P(AM/POEA) comes forth a different maximum value at different frequencies when the polymer concentration is different. It is generally believed that the dilational viscous component reflects the summation of the various microscopic relaxation processes at and near the interface and different relaxation processes have different characteristic frequencies. The spectrum of dilational viscous component may appear more than once maximum values at different frequencies. The influence of SDS on the limiting dilational elasticity and viscous component for polymer solution was elucidated. For 5000 ppm polymer solution, the limiting dilational elasticity decreased with an increase in SDS concentration. The dilational viscous component passed through a maximum value with a rise in the dilational frequency, which appeared at different frequency when SDS concentration is different; and the higher is the concentration, the lower is the dilational frequency. It can be explained that macromolecules may be substituted by SDS molecules in the interface and the interaction of molecules decrease, which makes the limiting dilational elasticity decrease. For 200 ppm polymer solution, the limiting dilational elasticity increased firstly and then decreased with SDS concentration increasing. This may be explained that the interfacial polymer concentration is so low that SDS molecules absorbed in the interface dominate dilational properties of the interfacial film even at very low SDS concentration. However, SDS molecules can gradually substitute the polymer molecules in the interface with a rise in SDS concentration, which results in the decrease in the limiting dilational elasticity.     

Theoretical study on the molecule C30H20: five carbon–carbon single bonds linking a dodecahedrane cage and a pentaprismane cage

Using geometry optimization and DFT method at the B3LYP/6-31G* level of theory for C₃₀H₂₀, an equilibrium geometry is identified that has the form of polyhedral hydrocarbon with five carbon–carbon single bonds linking a dodecahedrane cage and a pentaprismane cage. Thus, this molecule is a tri-cage molecule with two pentaprismane cages and one dodecahedrane cage. Vibrational frequencies and the infrared spectrum are computed at the same level of theory. The heat of formation for C₃₀H₂₀ has been estimated in this paper. The heat of formation of C₃₀H₂₀ as well as the vibrational analysis indicates that this molecule enjoys sufficient stability to allow for its experimental preparation.     

聚吖啶红修饰电极的制备及其应用

扑热息痛;聚吖啶红修饰电极的制备及其应用     

Ce0.6Zr0.35Y0.05O2和Pr0.6Zr0.35Y0.05O2催化剂表面上CO氧化和18O-16O交换反应的研究

测定了在Ce0.6Zr0.4O2,Ce0.6Zr0.35Y0.05O2,Pr0.6Zr0.4O2和Pr0.6Zr0.35Y0.05O2 (分别表示为CZ,CYZ,PZ和PYZ)样品表面上的CO氧化反应和18O-16O 同位素交换反应.结果表明: 在CZ和PZ系列固熔中掺杂Y3 离子可以改善晶格氧的迁移速度;PZ和PZY的晶格氧比CZ 和CZY 的晶格氧具有更高的氧化反应活性.其原因是将Y3 掺杂到Ce0.6Zr0.4O2 或Pr0.6Zr0.4O2晶格中,增加了样品的氧空位浓度,从而提高了晶格氧的迁移性质,而PrOx比CeO2具有更低温度的氧化还原性质,因此PZ和PZY的晶格氧比CZ 和CZY 的晶格氧具有更高的氧化反应活性.     

从石英光纤废料中制备硅新工艺的实验研究

对石英光纤废弃物氢热还原过程进行了热力学分析,并利用X射线衍射分析法(XRD)、激光拉曼光谱(Laser Raman Spectroscopy)、X射线光电子能谱(XPS)及化学分析等对该新工艺进行了实验研究.产物中只检测到硅和氧两种元素且金属键硅质量含量在15%以上,说明该方法不仅可以实现该类危险废弃物的无害化处理,而且还可以作为高纯度太阳级硅的一个潜在的供给渠道,从而弥补太阳能电池硅光伏材料供应的不足.     

金属离子掺杂对TiO2光催化性能的影响

TiO₂光催化反应过程涉及光生电荷、电荷迁移、电荷在TiO₂表面的反应和溶液体相反应4个顺序相接并相互影响的步骤.在TiO₂中掺杂金属离子对以上4个步骤均有重要影响,合理的掺杂可有效地提高其光催化性能.本文综合了国内外此方面的最新研究成果,从提高TiO₂光催化性能和优化光催化反应的角度出发,在材料吸光能力、电荷扩散、表面反应、粒径和晶型等方面,全面地分析总结了金属离子掺杂的影响效果和规律性认识,并对TiO₂基光催化材料的金属离子掺杂改性研究的未来发展方向提出了建议.文中还简要介绍了相关的掺杂方法和材料表征手段.     

从头计算方法比较TiSi_2的C54相和C49相

采用平面波超软赝势描述多电子体系,利用密度泛函理论和广义梯度近似,计算出C54相和C49相TiSi2的晶格常数、体弹性模量、形成能、电子态密度(DOS)和Mulliken电荷布居等性质.通过比较这两种物质的性质,发现尽管两者形成能很相近,但C49相结构对称性差、体弹性模量小、熔点低,Ti原子d轨道的反键强、离子性弱.这些性质上的差异和C49相TiSi2在固相反应中优先形成有关.     

血清中17α-羟孕酮的测定方法及其研究进展

阐述了17α-羟孕酮的检测在临床诊断研究方面的重要意义,综述了血清中17α-羟孕酮的检测方法及其研究进展。     

Photo- and thermally induced coloration of a crystalline MOF accompanying electron transfer and long-lived charge separation in a stable host-guest system

A new type of electron transfer (ET) system was built via the combination of a highly stable MOF host framework and methyl viologen guest molecule. The π-stacking arrangements adjust the distance between the D-A components, contributing to the formation of an ultra long-lived charge separated state in the photo/thermo dual stimuli-responsive complex.