Nonstoichiometric La(2 - x)GeO(5 - delta) monoclinic oxide as a new fast oxide ion conductor.

Oxide ion conductivity in La(2)GeO(5)-based oxide was investigated and it was found that La-deficient La(2)GeO(5) exhibits oxide ion conductivity over a wide range of oxygen partial pressure. The crystal structure of La(2)GeO(5) was estimated to be monoclinic with P2(1)/c space group. Conductivity increased with increasing the amount of La deficiency and the maximum value was attained at x = 0.39 in La(2 - x)GeO(5 - delta). The oxide ion transport number in La(2)GeO(5)-based oxide was estimated to be unity by the electromotive force measurement in H(2)-O(2) and N(2)-O(2) gas concentration cells. At a temperature higher than 1000 K, the oxide ion conductivity of La(1.61)GeO(5 - delta) was almost the same as that of La(0.9)Sr(0.1)Ga(0.8)Mg(0.2)O(3 - delta) or Ce(0.85)Gd(0.15)O(2 - delta), which are well-known fast oxide ion conductors. On the other hand, a change in the activation energy for oxide ion conductivity was observed at 973 K, and at intermediate temperature, the oxide ion conductivity of La(1.61)GeO(5 - delta) became much smaller than that of these well-known fast oxide ion conductors. The change in the activation energy of the oxide ion conductivity seems to be caused by a change in the local oxygen vacancy structure. However, doping a small amount of Sr for La in La(2)GeO(5) was effective to stabilize the high-temperature crystal structure to low temperature. Consequently, doping a small amount of Sr increases the oxide ion conductivity of La(2)GeO(5)-based oxide at low temperature.     

Stereo-controlled anti-hydromagnesiation of aryl alkynes by magnesium hydrides

A concise protocol for anti-hydromagnesiation of aryl alkynes was established using 1 : 1 molar combination of sodium hydride (NaH) and magnesium iodide (MgI₂) without the aid of any transition metal catalysts. The resulting alkenylmagnesium intermediates could be trapped with a series of electrophiles, thus providing facile accesses to stereochemically well-defined functionalized alkenes. Mechanistic studies by experimental and theoretical approaches imply that polar hydride addition from magnesium hydride (MgH₂) is responsible for the process.

Anti-hydromagnesiation of aryl alkynes was facilitated solely by magnesium hydride. The resulting alkenylmagnesium intermediates were functionalized with various electrophiles to afford stereochemically defined tri-substituted alkenes.     

根霉胞外羧甲基纤维素酶和β－葡糖苷酶的纯化研究

采用柱层析等步骤纯化了根霉Ｇ７的羧甲基纤维素酶及β－葡糖苷酶，回收率分别为４．５％和１９．６％．二种酶的最适酶反应温度都为５５°Ｃ，并都能在较大ｐＨ范围内保持稳定，其中羧甲基纤维素酶具有很高的耐热性，在１００°Ｃ水浴中保持１ｈ也仍可检测出约２０％的酶活性，最适反应ｐＨ为７．０～７．５；而β－葡糖苷酶的热稳性较差，其最适反应ｐＨ为５．０．该两种酶的分子量分别为２．５×１０４和９．５×１０４，而Ｋｍ值则分别为７．４０ｍｇｍＬ－１和０．２１３ｍｇｍＬ－１．     

Oxygen ion conductivity of yttria-niobia mixed oxide with fluoride related structure

The oxygen ion conductivity of Y₂O₃---Nb₂O₅ with a fluorite-like structure was studied. Substitutional solid solutions of Nb₂ O₅ in Y₂O₃ lattice formed the defect fluorite phase and remarkably enhanced the oxygen ion conductivity. Doping with tetravalent cations, especially Ti⁴⁺ or Ce⁴⁺, in yttria-niobia oxide is effective in enhancing the oxygen ion conductivity. Although the n-type semiconducting property appeared below P_O2 = 10⁻¹⁸ atm at 1243 K, the yttria-niobia mixed oxide doped with Ce⁴⁺, Ti⁴⁺, and Zr⁴⁺ stably exhibited oxygen-ion conduction in the wide range of oxygen partial pressures studied.     

One‐pot Annulation for Biaryl‐fused Monocarba‐closo‐dodecaborate through Aromatic B−H Bond Disconnection

We have developed a one‐pot annulation reaction of monocarba‐closo‐dodecaborate with cyclic diaryliodonium salts to afford biaryl‐fused derivatives. Aryl functionalities are introduced at both the 1‐carbon and unreactive ortho‐boron vertices of the “σ‐aromatic” carborane cage without the need for pre‐functionalization. DFT calculations revealed that the palladium‐catalyzed C?B bond‐formation step in this process proceeds through a concerted metalation–deprotonation (CMD)‐type pathway for the B?H bond disconnection on the aromatic cage, though such bonds are generally regarded as hydridic.     

Syntheses, structures and photochromism of two novel copper(II) complexes with 1,2-bis(2′-methyl-5′-(2″-pyridyl)-3′-thienyl)perfluorocyclopentene

Two novel Cu(II) complexes with 1,2-bis(2′-methyl-5′-(2″-pyridyl)-3′-thienyl)perfluorocyclopentene (BM-2-PTP) or its closed-form (closed-BM-2-PTP) were synthesized and characterized by X-ray crystallographic analysis. Both complexes are tetra-coordinated to two N atoms from distinct ligands and two Cl atoms from anions, forming 1-D polymeric structures. [Cu(BM-2-PTP)Cl₂] (1) showed typical spectral changes as analogous Ag(I) complexes with the same ligand upon appropriate light stimulus. However, closed-BM-2-PTP displayed different photocyclization from its open-ring form upon irradiation with UV light, indicating the photogenerated closed form turned into two kinds of closed-ring isomers. Furthermore, [Cu(closed-BM-2-PTP)Cl₂] (2) was revealed to contain two conformers by X-ray crystallographic analysis and displayed similarities in photocyclization to its free ligand. The distinct absorptions of the UV spectrum were attributed to the coexistence of two conformers in complex 2, both of which showed effective photoreactivities in the crystalline phase. The photochromic mechanism of complex 2 is tentatively concluded as two conformers displaying independent photoreactions.     

Catalytic degradation of polyolefins over hexagonal mesoporous silica: Effect of aluminum addition

Degradations of polypropylene (PP) and polyethylene (PE) over pure hexagonal mesoporous silica and aluminum-containing hexagonal mesoporous silica catalysts were studied in a fixed bed catalytic reactor at 380 and 430 °C, respectively. The thermal and catalytic degradations of both PP and PE in liquid-phase-contact and vapor-phase-contact modes over pure hexagonal mesoporous silica had no significant effect on the product yields. The liquid products were widely distributed in hydrocarbons with boiling point ranges of 36–405 °C. By adding a small amount of aluminum to the hexagonal mesoporous material, aluminium-containing hexagonal mesoporous silica exhibited good performance in cracking heavy molecular weight hydrocarbons into light hydrocarbons. High liquid yields and less coke deposits were obtained in liquid-phase-contact reaction with increasing aluminum content. The liquid products were mainly composed of C₅–C₁₀ hydrocarbons with boiling points of 36–174 °C, and propene, butene, and butane were main components in gaseous products. The effect of degradation temperature was not observed on product yields though degradation rate of polyolefin into liquid products was faster. Conversely, in vapor-phase-contact reaction, an increase in gaseous yield was observed when increasing the amount of aluminum and temperature of the cracking reactor, while the residue yield remained constant.