Controlled Reduction of Carboxamides to Alcohols or Amines by Zinc Hydrides

New protocols for controlled reduction of carboxamides to either alcohols or amines were established using a combination of sodium hydride (NaH) and zinc halides (ZnX₂). Use of a different halide on ZnX₂ dictates the selectivity, wherein the NaH‐ZnI₂ system delivers alcohols and NaH‐ZnCl₂ gives amines. Extensive mechanistic studies by experimental and theoretical approaches imply that polymeric zinc hydride (ZnH₂)_∞ is responsible for alcohol formation, whereas dimeric zinc chloride hydride (H?Zn?Cl)₂ is the key species for the production of amines.     

Temporal analysis of products (TAP) study on oxygen storage properties over Pt−Rh/CeO2 catalyst

The oxygen storage capacity of CeO₂, Ce_0.9Pr_0.1O₂, Pt?Rh/CeO₂ and Pt?Rh/Ce_0.9Pr_0.1O₂ was investigated by conventional GC pulse method and transient pulse techniques. It is shown that incorporation of PrO_y into CeO₂ matrix strongly promotes oxygen storage capacity (OSC) measured using the transient pulse technique. The improvement of OSC at low temperature is observed in Pt?Rh loaded onto CeO₂ and Ce?Pr catalysts.     

Oxide ion conductivity of double doped lanthanum gallate perovskite type oxide

Doping transition metal cation is known to enhance the electronic conduction of solid electrolytes, however, the ionic conduction can also be improved by those dopants. In this investigation, the oxide ion conductivity of LaGaO₃ based oxide doped with transition metal cations such as Fe, Co, Ni, Mn, and Cu for the Ga site was studied. It was found that doping Co or Fe is effective for enhancing the oxide ion conductivity. The improved oxide ion conductivity may be induced by the improved mobility of oxide ion. Among examined transition metal cations, cobalt is the most adequate cation as a dopant for the Ga site of LSGM. Considering the conductivity and the transport number, the optimized composition is found to be La_0.8Sr_0.2Ga_0.8Mg_0.115Co_0.085O₃. In this work, application of Co²⁺ doped LSGM as the electrolyte of internally reformed fuel cells was also investigated. Improvement in oxide ion conductivity is effective for enhancing the power generation characteristics. Paper presented at the 4th Euroconference on Solid State Ionics, Renvyle, Galway, Ireland, Sept. 13–19, 1997     

Peak effect and dynamic melting of vortex matter in NbSe2 crystals

We present a mode locking (ML) phenomenon of vortex matter observed around the peak effect regime of 2H-NbSe2 pure single crystals. The ML features allow us not only to trace how the shear rigidity of driven vortices persists on approaching the second critical field, but also to demonstrate a dynamic melting transition of driven vortices at a given velocity. We observe the velocity dependent melting signatures in the peak effect regime, which reveal a crossover between the disorder-induced transition at small velocity and the thermally induced transition at large velocity. This uncovers the relationship between the peak effect and the thermal melting.     

Studies on thermal degradation of acrylonitrile–butadiene–styrene copolymer (ABS-Br) containing brominated flame retardant

The thermal degradation of acrylonitrile-butadiene-styrene copolymer (ABS-Br; 10 g) containing brominated flame retardant (Br: 9.59 wt.%) was carried out at 450 °C using a semi batch operation using two different temperature programs. The heating rate was found to affect the quality of the degradation oil and yield of products (liquid, gas and residue). Data on the effect of the temperature program on the accumulation of liquid products was presented. It was found that the majority of the bromine was concentrated in the carbon residue and while majority of the nitrogen accumulates in the liquid products irrespective of degradation mode. The use of a one step constant heating rate process (I) produced a higher liquid yield (39%), than a two step process (29%). Differences were also noted in the Br and N contained in the liquids produced by the two processes.     

A new reforming process based on CH4 decomposition using a hydrogen-permeating membrane reactor

A new reforming process was studied using Ni/SiO₂ with a hydrogen-permeating membrane reactor. Nickel catalyst supported on SiO₂ is highly active for CH₄?H₂O?O₂ reaction in membrane reactor and the reaction close to CH₄+0.35O₂+1.3H₂O→CO₂+3.3H₂ proceeds at 873 K. Since the selectivity to carbon and CO₂ increased and decreased with decreasing contact time respectively, it is considered that the reaction was started by decomposition of CH₄ followed by oxidation of C and water shift reaction. Therefore, the reaction mechanism was different from so-called autothermal reforming (ATR) reaction.     

Study of buried Si(1 1 1)-5 × 2-Au by surface X-ray diffraction

The structure of buried Si(1 1 1)-5 × 2-Au capped with amorphous Si was investigated using surface X-ray diffraction. It was found that the 5 × 2 structural periodicity is kept under the amorphous Si from the in-plane measurement. Furthermore, the intensity variation along the fractional-order rod indicates that Au atoms are located almost on the same plane.     

The effect of silica–alumina catalysts on degradation of polyolefins by a continuous flow reactor

Catalytic degradation of polyolefins was performed in a continuous flow reactor that allows the study of the degradation processes at steady state, characterized by constant values of reaction parameters and properties of the products. The continuous flow reactor was operated at atmospheric pressure and at feed rate of 0–1.5 kg h^?1 polyolefins over two silica–alumina catalysts having different SiO₂/Al₂O₃ mole ratio. Polyethylene (PE), polypropylene (PP) and polystyrene (PS) were degraded at 420, 380 and 360 °C respectively. The cracking effect of silica–alumina was proved by the increased amount of gaseous products and by the decreased molecular weight of liquid products. The differences in surface area and in concentration and acidic strength of active centers of the two catalysts affected the distribution of degradation products. Molar rate of degradation was increased in the presence of catalysts, however the mass rate of degradation was decreased leading to higher values of the calculated activation energies. These interesting results might open new perspectives in understanding the macroscopic mechanism for catalytic degradation of polyolefins.     

Ignition enhancement by addition of NO and NO2 from a N2/O2 plasma torch in a supersonic flow

The effects of NO and NO₂ produced by using a plasma jet (PJ) of a N₂/O₂ mixture on ignition of hydrogen, methane, and ethylene in a supersonic airflow were experimentally and numerically investigated. Numerical analysis of ignition delay time showed that the addition of a small amount of NO or NO₂ drastically reduced ignition delay times of hydrogen and hydrocarbon fuels at a relatively low initial temperature. In particular, NO and NO₂ were more effective than O radicals for ignition of a CH₄/air mixture at 1200 K or lower. These ignition enhancement effects were examined by including the low temperature chemistry. Ignition tests by a N₂/O₂ PJ in a supersonic flow (M = 1.7) for using hydrogen, methane, and ethylene injected downstream of the PJ were conducted. The results showed that the ignitability of the N₂/O₂ PJ is affected by the composition of the feedstock and that pure O₂ is not the optimum condition for downstream fuel injection. This result of ignition tests with downstream fuel injection demonstrated a significant difference in ignition characteristics of the PJ from the ignition tests with upstream fuel injection.     

Silver(I) coordination polymers of fluorescent oligo(phenylenevinylene) with pi-pi stackings: luminescence and conductivity

Three luminescent silver(I)-oligo(phenylenevinylene) complexes, [Ag2(bmsb)(ClO4)2] (1), [Ag2(bmsb)(H2O)4](BF4)2 (2), and [Ag2(bdb)(CF3SO3)2] (3) (bmsb = 1, 4-bis(methylstyryl)benzene, bdb = 4,4'-bis(2, 5-dimethylstryryl)biphenyl), have been synthesized and structurally characterized. Complexes 1 and 2 are 2D networks with unique metallocyclophane motifs. Complex 3 affords a 2D zigzag sheet, in which silver triflates form tubelike double chains and bdb molecules act as linkages. Complex 2 exhibits high electric conductivity because of columnar aromatic stackings formed through intra- and intermolecular pi-pi interactions. Complexes 1-3 in the solid state exhibit luminescence, of which excitation and emission maxima are shifted to longer wavelength as compared to those of the corresponding metal-free ligands.