Front Transparent Passivation of CIGS-Based Solar Cells via AZO

We report a novel strategy for the front passivation of solar cells via aluminum-doped zinc oxide (AZO) films in the case of CIGS solar cells, leading to the highest efficiency of 15.07% without alkali metal post treatment and anti−reflective layer. The good passivation of CIGS solar cells via AZO films is attributed to the field passivation simulated by the SCAPS−1D software. The AZO films also exhibit high optical transparency both in visible and near infrared wavelength region, high conductivity, and cost−effective fabrication advantage. Importantly, the AZO films are deposited at room temperature via radio−frequency magnetron sputtering, showing that the AZO films are also applicable to other solar cells such as perovskite solar cells. Our work is of significance for advancing the development of CIGS−based photovoltaics devices by the well front passivation of AZO. The wide application of AZO in other solar cells such as perovskite solar cells and related tandem solar cells may also accelerate the development of these solar cells because of potential passivation of AZO, low deposition temperature, and high optical transparency of AZO.     

Organic/Inorganic Species Synergistically Supported Unprecedented Vanadomolybdates

Vanadomolybdates (VMos), comprised of Mo and V in high valences with O bridges, are one of the most important types of polyoxometalates (POMs), which have high activity due to their strong capabilities of gaining/losing electrons. Compared with other POMs, the preparation of VMos is difficult due to their relatively low structural stability, especially those with unclassical architectures. To overcome this shortcoming, in this study, triol ligands were applied to synthesize VMos through a beaker reaction in the presence of V₂O₅, Na₂MoO₄, and organic species in the aqueous solution. The single-crystal X-ray diffraction results indicate that two VMo clusters, Na₄{V₅Mo₂O₁₉[CH₃C(CH₂O)₃]}∙13H₂O and Na₄{V₅Mo₂O₁₉[CH₃CH₂C(CH₂O)₃]}∙13H₂O, with a similar architecture, were synthesized, which were both stabilized by triol ligand and {MoO₆} polyhedron. Both clusters are composed of five V ions and one Mo ion in a classical Lindqvist arrangement with an additional Mo ion, showing an unprecedented hepta-nuclear VMo structure. The counter Na⁺ cations assemble into one-dimensional channels, which facilitates the transport of protons and was further confirmed by proton conductivity experiments. The present results provide a new strategy to prepare and stabilize VMos, which is applicable for developing other compounds, especially those with untraditional architectures.     

毛细管电泳法在手性分离中的应用及进展

近年来,毛细管电泳(CE) 手性分离方法的研究主要集中在各种手性添加剂与对映体药物的匹配及实验条件的最优化选择上.目前,较为成熟的CE分离模式有:区带电泳(CZE)、凝胶电泳(CGE)、等速电泳(CITP)、胶束电动色谱(MEKC)和非水电泳(NACE)等,并已成功地用于手性化合物对映体的分离.CE手性分离研究正朝着新型手性选择剂的研制和实现与其他各种定性分析仪器及其他色谱分离模式的联用方向发展.     

Mesoporous sodium four-coordinate aluminosilicate nanoparticles modulate dendritic cell pyroptosis and activate innate and adaptive immunity

Pyroptosis is a programmed cell death widely studied in cancer cells for tumour inhibition, but rarely in dendritic cell (DC) activation for vaccine development. Here, we report the synthesis of sodium stabilized mesoporous aluminosilicate nanoparticles as DC pyroptosis modulators and antigen carriers. By surface modification of sodium-stabilized four-coordinate aluminium species on dendritic mesoporous silica nanoparticles, the resultant Na-^IVAl-DMSN significantly activated DC through caspase-1 dependent pyroptosis via pH responsive intracellular ion exchange. The released proinflammatory cellular contents further mediated DC hyperactivation with prolonged cytokine release. In vivo studies showed that Na-^IVAl-DMSN induced enhanced cellular immunity mediated by natural killer (NK) cells, cytotoxic T cells, and memory T cells as well as humoral immune response. Our results provide a new principle for the design of next-generation nanoadjuvants for vaccine applications.

Na-^IVAl-DMSN acts as both antigen carriers and modulators to “hyperactivate” dendritic cells (DCs) via potassium (K⁺) efflux dependent pyroptosis, eventually leading to enhanced adaptive and innate immunity.     

基于单透镜的空间光-单模光纤耦合方法

将自由空间光耦合进单模光纤产生超连续谱的实验中,空间光与单模光纤的耦合效率是其中的一个关键问题。常采用的单透镜或显微物镜进行耦合存在耦合效率低、调整难度大、端面易损伤等问题。提出了先将自由空间的光耦合进纤芯尺寸较大的单模光纤,然后将纤芯较大的单模光纤和纤芯较小的单模光纤进行熔接。实验结果表明,改进的耦合系统耦合效率大大提高,达到60％以上,且调整难度降低,光纤端面的损伤概率降低,大大提高了超连续谱产生的效率。     

Vanadium-Substituted Dawson-Type Polyoxometalate–TiO2 Nanowire Composite Film as Advanced Cathode Material for Bifunctional Electrochromic Energy-Storage Devices

Polyoxometalates (POMs) demonstrate potential for application in the development of integrated smart energy devices based on bifunctional electrochromic (EC) optical modulation and electrochemical energy storage. Herein, a nanocomposite thin film composed of a vanadium-substituted Dawson-type POM, i.e., K₇[P₂W₁₇VO₆₂]·18H₂O, and TiO₂ nanowires were constructed via the combination of hydrothermal and layer-by-layer self-assembly methods. Through scanning electron microscopy and energy-dispersive spectroscopy characterisations, it was found that the TiO₂ nanowire substrate acts as a skeleton to adsorb POM nanoparticles, thereby avoiding the aggregation or stacking of POM particles. The unique three-dimensional core−shell structures of these nanocomposites with high specific surface areas increases the number of active sites during the reaction process and shortens the ion diffusion pathway, thereby improving the electrochemical activities and electrical conductivities. Compared with pure POM thin films, the composite films showed improved EC properties with a significant optical contrast (38.32% at 580 nm), a short response time (1.65 and 1.64 s for colouring and bleaching, respectively), an excellent colouration efficiency (116.5 cm² C⁻¹), and satisfactory energy-storage properties (volumetric capacitance = 297.1 F cm⁻³ at 0.2 mA cm⁻²). Finally, a solid-state electrochromic energy-storage (EES) device was fabricated using the composite film as the cathode. After charging, the constructed device was able to light up a single light-emitting diode for 20 s. These results highlight the promising features of POM-based EES devices and demonstrate their potential for use in a wide range of applications, such as smart windows, military camouflage, sensors, and intelligent systems.     

Interfacial Adhesion between Fatty Acid Collectors and Hydrophilic Surfaces: Implications for Low-Rank Coal Flotation

Fatty acids, which are enriched in vegetable oil, have attracted much attention in low-rank coal flotation because of their unique chemical structure. In this study, density functional theory calculations, molecular dynamics simulations, and atomic force microscopy were employed to investigate the adsorption structure and forces between collectors and hydrophilic surfaces. The results show that fatty acids can be easily adsorbed onto surfaces through hydrogen bonds, and can cover the oxygen sites. The existence of hydration film on hydrophilic surfaces prevented nonpolar molecules from being able to adsorb, while polar fatty acids could adsorb and expel water molecules. The adhesion force between the RCOOH-terminated probe and the surface appeared in the retraction process, which differed significantly from that of the RCH₃-terminated probe, indicating that polar fatty acids are more suitable as flotation collectors for low-rank coal than nonpolar hydrocarbon oil. The simulation and AFM test revealed the mechanisms of polar fatty acids, and can provide guidance for low-rank coal flotation applications.     

化学计量学在分析化学中的应用

从化学定量构效关系、模式识别法、人工神经网络、波谱化学、多元校正分析法等方面对化学计量学在分析化学中的应用进行了综述。阐明了化学计量学在分析化学中的作用及广阔的应用前景。     

Synthesis and Rearrangement of P‐Nitroxyl‐Substituted PIII and PV Phosphanes: A Combined Experimental and Theoretical Case Study

Low‐temperature generation of P‐nitroxyl phosphane 2 (Ph₂POTEMP), which was obtained by the reaction of Ph₂PH ( 1 ) with two equivalents of TEMPO, is presented. Upon warming, phosphane 2 decomposed to give P‐nitroxyl phosphane P‐oxide 3 (Ph₂P(O)OTEMP) as one of the final products. This facile synthetic protocol also enabled access to P‐sulfide and P‐borane derivatives 7 and 13 , respectively, by using Ph₂P(S)H ( 6 ) or Ph₂P(BH₃)H ( 11 ) and TEMPO. Phosphane sulfide 7 revealed a rearrangement to phosphane oxide 8 (Ph₂P(O)STEMP) in CDCl₃ at ambient temperature, whereas in THF, thermal decomposition of sulfide 7 yielded salt 10 ([TEMP‐H₂][Ph₂P(S)O]). As well as EPR and detailed NMR kinetic studies, indepth theoretical studies provided an insight into the reaction pathways and spin‐density distributions of the reactive intermediates.