Pd-catalysed decarboxylative Suzuki reactions and orthogonal Cu-based O-arylation of aromatic carboxylic acids

Pd-catalysed decarboxylative Suzuki reactions and orthogonal Cu-based O-arylation reactions of aromatic carboxylic acids are reported. The new reactions may provide alternative routes for the synthesis of some biaryls and aromatic carboxylic esters.     

基于石墨烯的样品制备技术研究亮点

自2004年被首次制备出来,石墨烯就受到了全世界科学家的普遍关注。石墨烯是由单层碳原子组成的六方蜂巢状结构的二维物质,如果以每平方纳米石墨烯片层结构上容纳的碳原子个数为38来计算,石墨烯具有很大的比表面积（2630 m2/g）,再加上其生产成本低,使其成为样品预处理中理想的富集材料之一。     

Mechanism of the fast exchange between bound and free guests in cucurbit[7]uril-guest systems

The fast exchange is found to be due to the mismatch between the hydrophobic interaction inside the CB[7] cavity and the ion-dipole/hydrogen-bonding interactions in the port region of the CB[7]. This mismatch also induces the multi-step separation process between guest and CB[7] molecules, as elucidated by molecular dynamics simulation.     

Flow/sequential injection determination of gaseous ammonia with a glass diffusion denuder

A new combination of a flow/sequential injection method for the analysis of ammonia has been developed. Gaseous ammonia is selectively absorbed in a phosphoric acid coated glass tube and determined with Berthelot reagents by flow injection. The combination of the gas diffusion denuder sampler with flow injection makes this method very sensitive and selective. The limit of detection of 0.15 mug NH(3).     

生物样品中速可眠及代谢产物的分析

应用气相色谱／质谱（ＧＣ／ＭＳ）法对一例速可眠中毒病人生物样品进行分析鉴定。样品经酸化、乙醚提取,然后于ＧＣ／ＭＳ分析,在患者胃内容物和血中检出速可眠,在眼药３３ｈ尿内可检出速可眠原型药物以及四个代谢产物。并用外标法对生物样品中速可眠进行定量测定,对临床救治起到了积极作用。     

聚氯乙烯—丁腈橡胶—氯丁橡胶三元共混物的研究

测定了聚氯乙烯（ＰＶＣ）－丁脯橡胶（ＮＢＲ－２９）－氯丁橡胶（ＣＲ）三元共混物的冲击性能和应力－应变行为，用动态力分析、扫描电和透射电镜研究了共混物的相容性和形态结构。结果表明，ＮＢＲ－２９对ＰＶＣ，ＣＲ有良好的增容作用，三元共混物是部分相容的二相体系，具有良好的抗冲击性能。     

冠醚配合物的研究XV.若干席夫碱及仲胺型双冠醚和碱金属离子的配位反应

本文运用微量电导滴定及计算机拟合技术，研究了若干席夫碱及仲胺型双冠醚和碱金属离子的配位反应，测定了配合物的组成及稳定常数，并对实验结果进行了讨论。     

TiO2/activated carbon fibers photocatalyst: Effects of coating procedures on the microstructure, adhesion property, and photocatalytic ability

In order to more easily separate TiO₂ photocatalyst from the treated wastewater, TiO₂ film was immobilized on the surface of activated carbon fibers (ACFs) by employing two kinds of coating procedures, dip-coating, and hydrothermal treatment. The effects of coating procedures on microstructure of TiO₂-coated ACFs (TiO₂/ACFs), such as morphology, porous property, crystal structure, and light absorption characteristics were investigated in detail. The adhesion property between TiO₂ film and ACFs was evaluated by ultrasonic vibration, and the photocatalytic activity of TiO₂/ACFs was tested by the photocatalytic decoloration of methylene blue solution. The results show that hydrothermal treatment presented many advantages to obtain high-performance TiO₂/ACFs photocatalyst in comparison with dip-coating. Hydrothermal treatment could improve the binding property between TiO₂ films and ACFs, which endowed the as-obtained TiO₂/ACFs photocatalyst with improved reusable performance, and TiO₂/ACFs synthesized by hydrothermal treatment presented higher photocatalytic activity.     

Rational design of core–shell molecularly imprinted polymer based on computational simulation and Doehlert experimental optimization: application to the separation of tanshinone IIA from Salvia miltiorrhiza Bunge

Computational simulation and Doehlert experimental optimization were done for the rational design of a core-shell molecularly imprinted polymer (CS-MIP) for use in the highly selective separation of Tanshinone IIA (TSIIA) from the crude extracts of Salvia miltiorrhiza Bunge (SMB). The functional monomer layer of the polymer shells directed the selective occurrence of imprinting polymerization at the surface of silica through the copolymerization of vinyl end groups with functional monomers and also drove TSIIA templates into the formed polymer shells through the charge-transfer complex interactions between TSIIA and the functional monomer layer. As a result, the maximum rebinding capacity was achieved with the use of optimal grafting ratio by the Doehlert design. The CS-MIP exhibited high recognition selectivity and binding affinity to TSIIA. When the imprinted particles were used as dispersive solid phase extraction sorbents, the recovery yield of TSIIA reached 93% by a one-step extraction from the crude extracts of SMB, and the purity of TSIIA was larger than 98% by HPLC analysis. These results show the possibility of a highly selective separation and enrichment of TSIIA from the SMB using the TSIIA-imprinted core-shell molecularly imprinted polymers.