Biofouling-resistance expanded poly(tetrafluoroethylene) membrane with a hydrogel-like layer of surface-immobilized poly(ethylene glycol) methacrylate for human plasma protein repulsions

In general, it is a challenge to control the highly polar material grafting from the chemically inert Teflon-based membrane surface. This work describes the surface modification and characterization of expanded poly(tetrafluoroethylene) (ePTFE) membranes grafted with poly(ethylene glycol) methacrylate (PEGMA) macromonomer via surface-activated plasma treatment and thermally induced graft copolymerization. The chemical composition and microstructure of the surface-modified ePTFE membranes were characterized by Fourier transform infrared spectroscopy (FT-IR), contact angle, and bio-atomic force microscopy (bio-AFM) measurements. Biofouling property of the modified membranes was evaluated by the measurements of the plasma protein (γ-globulin, fibrinogen, or albumin) adsorption determined using an enzyme-linked immunosorbent assay (ELISA). In general, the hydrophilicity of the surface of ePTFE membranes increases with increasing the grafting degree of the copolymerized PEGMA. The highly hydrated PEGMA chain on the resulting ePTFE membranes was found to form a surface hydrogel-like layer with regulated coverage in aqueous state, which can be controlled by the content of PEGMA macromonomer in the reaction solution. The relative protein adsorption was effectively reduced with increasing capacity of the hydration for the PEGMA chain grafted on the ePTFE membrane surface. From both results of protein adsorption and platelet adhesion test in vitro, it is concluded that the PEGMA-grafted hydrophilic ePTFE membranes could provide good biofouling resistance to substantially reduce plasma protein and blood platelet fouling on the membrane surface in human body temperature.     

双水相体系中Proline/CuI催化Heck反应的研究

以双水相为反应溶剂,丙烯酸酯、苯乙烯与多种芳卤化合物在催化剂碘化亚铜、配体L-脯氨酸的存在下,在较低的温度(75～85 ℃)下得到了产物,该方法具有反应时间短、产率较高、选择性较好等特点,为该反应及该类化合物的合成提供了一种新方法。产物通过熔点、红外、核磁共振氢谱、碳谱等方法的表征。     

Scanning photoemission spectromicroscopic study of 4-nm ultrathin SiO(3.4) protrusions probe-induced on the native SiO(2) layer

Atomic force microscopy probe-induced large-area ultrathin SiO(x) (x ≡ O/Si content ratio and x > 2) protrusions only a few nanometers high on a SiO(2) layer were characterized by scanning photoemission microscopy (SPEM) and X-ray photoemission spectroscopy (XPS). SPEM images of the large-area ultrathin SiO(x) protrusions directly showed the surface chemical distribution and chemical state specifications. The peak intensity ratios of the XPS spectra of the large-area ultrathin SiO(x) protrusions provided the elemental quantification of the Si 2p core levels and Si oxidation states (such as the Si(4+), Si(3+), Si(2+), and Si(1+) species). The O/Si content ratio (x) was evidently determined by the height of the large-area ultrathin SiO(x) protrusions.     

Biosynthesis of Ribostamycin Derivatives by Reconstitution and Heterologous Expression of Required Gene Sets

Ribostamycin is a 4,5-disubstituted 2-deoxystreptamine (DOS)-containing aminoglycoside antibiotics and naturally produced by Streptomyces ribosidificus ATCC 21294. It is also an intermediate in the biosynthesis of butirosin and neomycin. In the biosynthesis of ribostamycin, DOS is glycosylated to generate paromamine which is converted to neamine by successive dehydrogenation followed by amination, and finally ribosylation of neamine gives ribostamycin. Here, we report the biosynthesis of 6′-deamino-6′-hydroxyribostamycin (a ribostamycin derivative or pseudoribostamycin) in Streptomyces venezuelae YJ003 by reconstructing gene cassettes for direct ribosylation of paromamine. A trace amount of pseudoribostamycin was detected with ribostamycin in the isolates of ribostamycin cosmid heterologously expressed in Streptomyces lividans TK24. It has also indicated that the ribosyltransferase can accept both neamine and paromamine. Thus, the present in vivo modification of ribostamycin could be useful for the production of hybrid compounds to defend against bacterial resistance to aminoglycosides.     

Study on tribological behaviors of short glass fiber and polytetrafluoroethylene reinforced polycarbonate composites via a d‐optimal mixture design

This study analyzed variations of tribological behaviors that depend on the injection molding techniques during the blending of short glass fiber (SGF) and polytetrafluoroethylene (PTFE) reinforced polycarbonate (PC) composites. The proposed planning of blending experiments is to use a D‐optimal mixture design (DMD). The tribological behaviors of friction coefficient and wear mass loss were selected for discussion. Nine experimental runs, based on a DMD method, utilized to train the back‐propagation neural network (BPNN) and then the simulated annealing algorithm (SAA) approach is applied to search for an optimal mixture ratio setting. In addition, the result of BPNN integrating SAA was also compared with response surface methodology (RSM) approach. The results of confirmation experiment show that DMD, RSM, and BPNN integrating SAA method are effective tools for the optimization of reinforced process. Furthermore, the scanning electron microscope (SEM) images show that the abundant debris are peeled off from the matrix materials and predominant delamination mechanisms and plastic deformation are shown on the worn surface after tribological behavior tests. Copyright © 2010 John Wiley & Sons, Ltd.     

A Facile Synthetic Method of 3-Bromoflavones

The synthesis of 3-bromoflavones by bromination-debromination using pyridinium bromide perbromide is described.     

Evaluation of liquid junction potentials and determination of pH values of strong acids at moderate ionic strengths

A new experimental approach is proposed for the evaluation of liquid junction potentials and single ion activities. Neither of these quantities can be experimentally measured without assumption. Furthermore, they are concentration dependent but without clearly defined functional relationships. Thus, a given assumption may be satisfactory to obtain these quantities at a given concentration, but will fail at another concentration. It is the intent of this paper to establish a functional relationship between the ratio of activity coefficients and the ionic strength, through which the liquid junction potentials may be computed, as well as the pH values at moderate ionic strengths (<1.0 m). Experimental results are presented and uncertainties are discussed.     

Solvent extraction and bulk liquid membrane transport of Co(II) and Ni(II) ammine cations by proton-ionizable crown ethers

Separation efficiencies and selectivities in solvent extraction of Co(II) and Ni(H) ammine cations from aqueous solutions into chloroform and toluene and in transport through bulk toluene membranes by proton-ionizable crown ethers have been determined. Six proton-ionizable crown ethers with differing lipophilicities, polyether cavity sizes and ionizable groups (carboxylic and sulfonic acid functions) were examined. Higher selectivity and efficiency for Co(II) ammine cation extraction was observed for the more lipophilic, proton-ionizable crown ethers. Highly lipophilic crown carboxylic acids provided effective and selective transport of Co(II) ammine cations through bulk toluene membranes.Presented in part at the 6th International Symposium on High Purity Materials in Science and Technology: Preparation, Characterization and Application of Well-Defined Materials, Dresden, GDR, May 1985, Poster D91, Poster Abstracts, pp. 144, 145.All extraction and transport experiments were conducted at this location.     

Preparation and Characterization of Mixed‐Valent Nickel Oxide/Nickel Hexacyanoferrate Hybrid Films and Their Electrocatalytic Properties

Polynuclear mixed‐valent nickel oxide and nickel hexacyanoferrate hybrid film was prepared on glassy carbon electrode by multiple scan cyclic voltammetry. The film growth was monitored using electrochemical quartz crystal microbalance (EQCM). The cyclic voltammogram of the nickel hexacyanoferrate film is characterized by single redox couple whereas nickel oxide/nickel hexacyanoferrate hybrid film exhibits two redox couples. Cyclic voltammetric features suggest that the charge transfer process in both films resembles that of surface‐confined redox species. In stronger basic solution (pH ≥9), nickel hexacyanoferrate film was gradually converted into nickel oxide film during potentiodynamic cycling. The peak potential of nickel oxide redox couple moved into more negative side with increasing pH of contacting solution whereas the peak potential of nickel hexacyanoferrate redox couple remains the same. Electrocatalytic behavior of hybrid film coated electrodes toward ascorbic acid, hydrazine and hydroxylamine was investigated using cyclic voltammetry technique. Analytical application of nickel oxide/nickel hexacyanoferrate hybrid film electrode was tested in amperometry and flow injection analysis.     

Four New Lariciresinol‐Based Lignan Glycosides from the Roots of Rhus javanica var. roxburghiana

The four new lariciresinol‐based lignan glycosides, (?)‐lariciresinol 4′‐(6″‐O‐feruloyl‐β‐D ‐glucopyranoside) ( 1 ), (?)‐lariciresinol 4′‐(4″,6″‐di‐O‐feruloyl‐β‐D ‐glucopyranoside) ( 2 ), 5,5′‐dimethoxylariciresinol 4′‐(4″,6″‐di‐O‐feruloyl)‐β‐D ‐glucopyranoside) ( 3 ), and 4‐O‐[α‐(1,2‐dihydroxyethyl)syringyl]‐5,5′‐dimethoxylariciresinol 4′‐(4″,6″‐di‐O‐feruloyl‐β‐D ‐glucopyranoside) ( 4 ), together with two known ones, lariciresinol 4′‐β‐D ‐glucopyranoside) ( 5 ) and tortoside B ( 6 ), were isolated from the BuOH extract of Rhus javanica var. roxburghiana roots, and their structures were established by means of various spectroscopic techniques.