Ga8Ir4B – ein Gallium-Iridiumborid mit isolierten,annähernd quadratisch planaren Ir4B-Gruppen in einer vom CaF2-Typ abgeleiteten Struktur

Ga₈Ir₄B – a Gallium Iridium Boride with isolated, nearly square planar Ir₄B Groups in a Structure derived from the CaF₂ Type The new compound Ga₈Ir₄B (tetragonal, I4₁/acd, a = 853.69(2) pm, c = 2 105.69(6) pm, Z = 8, 614 reflections, 31 parameters, R = 0.034) was prepared by reaction of the elements at 1 100°C. The structure is derived from the CaF₂ type. It contains isolated Ir₄B groups with boron in an unusual, nearly square planar coordination.     

Regiospecific synthesis of mono- and bicyclic 6-alkoxy-2-pyrones and their use in the preparation of substituted aromatics,anthraquinones, and tetracyclic intermediates for 11-deoxyanthracycline synthesis

Several mono- and bicyclic 6-methoxy-2-pyrones having substituents at C4 and C5 can be prepared regiospecifically by either of two routes: (1) regiospecific construction of a glutaconic half-ester followed by dehydrative cyclization, and (2)regiospecific Friedel-Crafts acylation of 6-methoxy-2-pyrones at C5. These pyrones undergo clean and regiospecific Diels-Alder cycloadditions with various unsymmetrical dienophiles, e.g., quinones, unsaturated esters, etc, with subsequent loss of carbon dioxide. In this manner several polycyclic aromatic natural products have been prepared such as chrysophanol, helminthosporin, pachybasin, 2-acetylemodin and the purported structure for orientalone. The utility of this approach for the synthesis of the anthracyclines is demonstrated by its use in the preparation of various tetracyclic intermediates for anthracycline synthesis.     

Synthesis,crystal structure,magnetism, and absorption spectra of A2UX5 Type Halides (A = K,Rb; X = Cl,Br, I)

The ternary uranium(III) halides A₂UX₅ (A = K, Rb; X = Cl, Br, I) have been prepared from the binary components AX and UX₃ in sealed tantalum containers. According to their Guinier X-ray powder patterns, they all crystallize with the K₂PrCl₅/Y₂HfS₅ type of structure. Lattice constants for ambient temperature are reported. Single-crystal structure refinemens were undertaken for K₂UI₅ and Rb₂UCl₅. Magnetic susceptibility data were recorded with a SQUID magnetometer from liquid helium to room temperature. One-dimensional (intrachain) and three-dimensional antiferromagnetic ordering occur at low temperatures dependent upon the U³⁺? U³⁺ distance. Absorption spectra were recorded between 4 000 and 28 000 cm^?1. They show f—f transitions typical for U³⁺ and, depending on the halide, very strong f—d transitions above 14 000 to 15 000 cm^?1, respectively.     

Cure behavior and thermal stability of an epoxy: new bismaleimide blends for composite matrices

A new bismaleimide (BMI) resin was synthesized to formulate epoxy(tetraglycidyl diaminodiphenyl methane; TGDDM) – bismaleimide thermoset blends for composite matrix applications. 4,4′-diaminodiphenyl methane (DDM) was used as an amine curing agent for the TGDDM. A Fourier transform infrared (FTIR) spectroscopy was employed to characterize the new BMI resin. Cure behavior of the epoxy–BMI blends was studied using a differential scanning calorimeter (DSC). DSC thermograms of the thermoset blends indicated two exothermic peaks. The glass transition temperature of the thermoset blends decreased with BMI content. Thermogravimetric analysis (TGA) was carried out to investigate thermal degradation behavior of the cured epoxy–BMI thermoset blends. The new BMI resin reacted partially with the DDM and weak intercrosslinking polymer networks were formed during cure of the thermoset blends.     

Reactions of N-silylphosphoranimines with alcohols: synthesis and structure of cyclotriphosphazenes with nongeminal methyl and phenyl substituents

The reactions of Me(3)SiN=P(OR")RR'(R" = Ph, CH(2)CF(3); R, R' = Me, Ph) with alcohols were investigated. With nonequivalent amounts of CF(3)CH(2)OH, the reactions produced high yields of the cyclic phosphazene (Me(2)PN)(3) and both the cis and trans isomers of nongeminally substituted [(Ph)(Me)PN](3). The isomers of this new cyclic phosphazene were separated by column chromatography and characterized by NMR and IR spectroscopy, elemental analysis, and X-ray crystallography. Crystals of the cis isomer 6a have a monoclinic crystal system, while the trans isomer 6b has a triclinic crystal system with two different molecules in an asymmetric unit. The bond lengths and bond angles are very similar to those of the simpler cyclic trimers (Me(2)PN)(3) and (Ph(2)PN)(3.) A likely pathway for the formation of these compounds is discussed.     

Experimental evidence of structural transition from fcc to bulk bcc in nanophase metal clusters of (Fe)n, (Cr)n, (Mo)n and (W)n produced by CO2 laser multiphoton decomposition of metal carbonyls

We have produced nanophase metal clusters, (Fe)_n, (Cr)_n, (Mo)_n and (W)_n, by multiphoton decomposition of the corresponding metal carbonyls with a 10.6 μm CO₂ laser in the presence of Ar and SF₆. The size distribution was narrow and the average diameter was 6, 3.5, 2 and 1 nm for Fe, Cr, Mo and W clusters, respectively. The structure was found to be bcc for both Fe and Cr clusters, fcc for Mo clusters, and amorphous for W clusters (note that all the bulk metals have bcc structure). Considering the cluster sizes (9630, 1870, 230 and 30 for Fe, Cr, Mo and W clusters, respectively) estimated from their average diameters, it is likely that there exists a structural transition from fcc to bulk bcc with increasing cluster size in these metal clusters.     

Six-coordinate and five-coordinate Fe(II)(CN)(2)(CO)(x) thiolate complexes (x = 1, 2): synthetic advances for iron sites of [NiFe] hydrogenases

The dicyanodicarbonyliron(II) thiolate complexes trans,cis-[(CN)(2)(CO)(2)Fe(S,S-C-R)](-) (R = OEt (2), N(Et)(2) (3)) were prepared by the reaction of [Na][S-C(S)-R] and [Fe(CN)(2)(CO)(3)(Br)](-) (1). Complex 1 was obtained from oxidative addition of cyanogen bromide to [Fe(CN)(CO)(4)](-). In a similar fashion, reaction of complex 1 with [Na][S,O-C(5)H(4)N], and [Na][S,N-C(5)H(4)] produced the six-coordinate trans,cis-[(CN)(2)(CO)(2)Fe(S,O-C(5)H(4)N)](-) (6) and trans,cis-[(CN)(2)(CO)(2)Fe(S,N-C(5)H(4))](-) (7) individually. Photolysis of tetrahydrofuran (THF) solution of complexes 2, 3, and 7 under CO led to formation of the coordinatively unsaturated iron(II) dicyanocarbonyl thiolate compounds [(CN)(2)(CO)Fe(S,S-C-R)](-) (R = OEt (4), N(Et)(2) (5)) and [(CN)(2)(CO)Fe(S,N-C(5)H(4))](-) (8), respectively. The IR v(CN) stretching frequencies and patterns of complexes 4, 5, and 8 have unambiguously identified two CN(-) ligands occupying cis positions. In addition, density functional theory calculations suggest that the architecture of five-coordinate complexes 4, 5, and 8 with a vacant site trans to the CO ligand and two CN(-) ligands occupying cis positions serves as a conformational preference. Complexes 2, 3, and 7 were reobtained when the THF solution of complexes 4, 5, and 8 were exposed to CO atmosphere at 25 degrees C individually. Obviously, CO ligand can be reversibly bound to the Fe(II) site in these model compounds. Isotopic shift experiments demonstrated the lability of carbonyl ligands of complexes 2, 3, 4, 5, 7, and 8. Complexes [(CN)(2)(CO)Fe(S,S-C-R)](-) and NiA/NiC states [NiFe] hydrogenases from D. gigas exhibit a similar one-band pattern in the v(CO) region and two-band pattern in the v(CN) region individually, but in different positions, which may be accounted for by the distinct electronic effects between [S,S-C-R](-) and cysteine ligands. Also, the facile formations of five-coordinate complexes 4, 5, and 8 imply that the strong sigma-donor, weak pi-acceptor CN(-) ligands play a key role in creating/stabilizing five-coordinate iron(II) [(CN)(2)(CO)Fe(S,S-C-R)](-) complexes with a vacant coordination site trans to the CO ligand.     

Dynamic identification of phosphopeptides using immobilized metal ion affinity chromatography enrichment, subsequent partial beta-elimination/chemical tagging and matrix-assisted laser desorption/ionization mass spectrometric analysis

The enrichment of phosphopeptides using immobilized metal ion affinity chromatography (IMAC) and subsequent mass spectrometric analysis is a powerful protocol for detecting phosphopeptides and analyzing their phosphorylation state. However, nonspecific binding peptides, such as acidic, nonphosphorylated peptides, often coelute and make analyses of mass spectra difficult. This study used a partial chemical tagging reaction of a phosphopeptide mixture, enriched by IMAC and contaminated with nonspecific binding peptides, following a modified beta-elimination/Michael addition method, and dynamic mass analysis of the resulting peptide pool. Mercaptoethanol was used as a chemical tag and nitrilotriacetic acid (NTA) immobilized on Sepharose beads was used for IMAC enrichment. The time-dependent dynamic mass analysis of the partially tagged reaction mixture detected intact phosphopeptides and their mercaptoethanol-tagged derivatives simultaneously by their mass difference (-20 Da for each phosphorylation site). The number of new peaks appearing with the mass shift gave the number of multiply phosphorylated sites in a phosphopeptide. Therefore, this partial chemical tagging/dynamic mass analysis method can be a powerful tool for rapid and efficient phosphopeptide identification and analysis of the phosphorylation state concurrently using only MS analysis data.     

Synthesis of nanosized TiO2/SiO2 particles using microwave processes and their photocatalytic activity on the decomposition of orange II

The nanosized titania and TiO₂/SiO₂ particles were prepared by the microwave-hydrothermal method. The effect of physical properties TTIP/TEOS ratio and calcination temperature has been investigated. The major phase of the pure TiO₂ particle is of the anatase structure, and a rutile peak was observed above 800°C. In TiO₂/SiO₂ particles, however, no significant rutile phase was observed, although the calcination temperature was 900°C. No peaks for the silica crystal phase were observed at either silica/titania ratio. The crystallite size of TiO₂/SiO₂ particles decreases as compared to pure TiO₂ at high calcination temperatures. The TiO₂/SiO₂ particles show higher activity on the photocatalytic decomposition of orange II as compared to pure TiO₂ particles.     

Unique Fluxional Behavior. Synthesis, Structure, and Properties of Novel (Diamine)platinum(II) Complexes of 9-Fluorenylidene- and Benzhydrylidenemalonate Ligands

New (diamine)platinum(II) complexes A(2)PtX(2) (A(2) = trans-(+/-)-1,2-diaminocyclohexane (DACH), tetrahydro-4H-pyran-4,4-diylbis(methylamine)(THPDMA); X(2) = 9-fluorenylidenemalonate(FM), benzhydrylidenemalonate(BHM)) have been synthesized and characterized by means of multinuclear NMR spectroscopy and X-ray analysis. (DACH)Pt(FM) crystallizes in space group P2(1)/c with eight formula units in a cell of dimensions a = 20.071(7) ?, b = 12.717(3) ?, c = 24.512(6) ?, beta = 103.25(2) degrees, and V = 6090(3) ?.(3) (DACH)Pt(BHM) crystallizes in space group P&onemacr; with four molecular units in a cell of dimensions a = 11.048(3) ?, b = 13.639(3) ?, c = 14.043(6) ?, alpha = 90.17(3) degrees, beta = 91.31(4) degrees, gamma = 89.98(3) degrees, and V = 2116(1) ?(3). The platinum atom in both complexes adopts a typical square planar arrangement with two nitrogen atoms in cis position. The 9-fluorenylidene and benzhydrylidene groups of the amine ligands chelated to platinum are strikingly bent up by 88.8(3) and 80.8(2) degrees, respectively, from the platinum square plane in the solid state. Variable temperature (1)H NMR spectra of the title complexes in dimethyl sulfoxide solution reveals that the amine proton resonances are sensitive to the fluxional motion of the remote arylidene groups, and suggests that interconversion occurs between two "bent-up" and "bent-down" forms. The prominent difference between the FM and BHM complexes is observed in solution, due to the presence or absence of the angle constraint of the anionic coligands.