超深亚微米互补金属氧化物半导体器件的剂量率效应

对0.18 μm互补金属氧化物半导体(CMOS)工艺的N型金属氧化物半导体场效应晶体管(NMOSFET)及静态随机存储器(SRAM)开展了不同剂量率下的电离总剂量辐照试验研究. 结果表明: 在相同累积剂量, SRAM的低剂量率辐照损伤要略大于高剂量率辐照的损伤, 并且低剂量率辐照损伤要远大于高剂量率辐照加与低剂量率辐照时间相同的室温退火后的损伤. 虽然NMOSFET 低剂量率辐照损伤略小于高剂量率辐照损伤, 但室温退火后, 高剂量率辐照损伤同样要远小于低剂量率辐照损伤. 研究结果表明0.18 μm CMOS工艺器件的辐射损伤不是时间相关效应. 利用数值模拟的方法提出了解释CMOS器件剂量率效应的理论模型.     

光辐射吸收材料表面形貌与吸收率关系研究

光辐射吸收材料不同的表面形貌对入射光具有不同的多重反射吸收效果,对光辐射的吸收有较大的影响,合适的表面形貌可以提高光辐射有效吸收率.本文通过光线追迹的方法对V形表面、正弦表面、具有正态倾角(平均倾角)分布的表面以及具有正态高度分布的表面进行模拟, 分析了这四种表面对光辐射吸收率的提升效果及其入射角特性.通过倾角分布分析,得出不同表面形貌提升吸收率共同的必要条件,即倾角中心分布至少大于30°,并指出V形表面在正入射时对吸收率提升的优越性. 关键词： 光吸收材料 表面形貌 吸收率 表面倾角分布     

Enhanced thermal properties and flame retardancy from a thermosetting blend of a phosphorus‐containing bismaleimide and epoxy resins

Epoxy resins modified by an organosoluble phosphorus‐containing bismaleimide (3,3′‐bis(maleimidophenyl) ­phenylphosphine oxide; BMPPPO) were prepared by simultaneously curing epoxy/diaminodiphenylmethane (DDM), and BMPPPO. The resulted epoxy resins were found to exhibit glass transition temperatures as high as 212 °C, thermal stability at temperatures over 350 °C, and excellent flame retardancy with Limited oxygen index (LOI) values around 40. Incorporation of BMPPPO into epoxy resins via the thermosetting blend was demonstrated to be an effective way to enhance the thermal properties and flame retardancy simultaneously. Copyright © 2003 John Wiley & Sons, Ltd.     

Association of Paraoxonase 1 (PON1) polymorphisms with osteoporotic fracture risk in postmenopausal Korean women

There is increasing evidence of a biochemical link between lipid oxidation and bone metabolism. Paraoxonase 1 (PON1) prevents the oxidation of low-density lipoprotein (LDL) and metabolizes biologically active phospholipids in oxidized LDLs. Here, we performed association analyses of genetic variation in PON1 to ascertain its contribution to osteoporotic fractures (OFs) and bone mineral density (BMD). We directly sequenced the PON1 gene in 24 Korean individuals and identified 26 sequence variants. A large population of Korean postmenopausal women (n=1,329) was then genotyped for eight selected PON1 polymorphisms. BMD at the lumbar spine and femoral neck was measured using dual-energy X-ray absorptiometry. Lateral thoracolumbar (T4-L4) radiographs were obtained for vertebral fracture assessment, and the occurrence of non-vertebral fractures (i.e., wrist, hip, forearm, humerus, rib, and pelvis) was examined using self-reported data. Multivariate analyses showed that none of the polymorphisms was associated with BMD at either site. However, +5989A>G and +26080T>C polymorphisms were significantly associated with non-vertebral and vertebral fractures, respectively, after adjustment for covariates. Specifically, the minor allele of +5989A>G exerted a highly protective effect against non-vertebral fractures (OR=0.59, P=0.036), whereas the minor allele of +26080T>C was associated with increased susceptibility to vertebral fractures (OR=1.73, P=0.020). When the risk for any OFs (i.e., vertebral or non-vertebral) was considered, the statistical significance of both polymorphisms persisted (P=0.002-0.010). These results suggest that PON1 polymorphisms could be one of useful genetic markers for OF risk in postmenopausal women.     

Effects of Nb substitution for Zr on the phases,microstructure and magnetic properties of Co80Zr18−xNbxB2 melt-spun ribbons

The phases, microstructure, and magnetic properties of Co₈₀Zr_18−xNb_xB₂ (x=1, 2, 3, and 4) melt-spun ribbons were investigated. The small substitution of Nb for Zr in the Co–Zr–B melt-spun ribbons resulted in the improvement of magnetic properties, especially the coercivity. The main effect of added Nb on the coercovity of Co–Zr–Nb–B melt-spun ribbons, originated from modification of the grain size of Co₁₁Zr₂ phase. The coercivity of the Co–Zr–Nb–B melt-spun ribbons depends on the annealing temperature. The optimal magnetic properties of H_c=5.1 kOe, and (BH)_max=3.4 MGOe were obtained in the Co₈₀Zr₁₅Nb₃B₂ melt-spun ribbons annealed at 600 °C for 3 min.     

Dual Lie Bialgebra Structures of W -algebra W (2, 2) Type

In the present paper, we investigate the dual Lie coalgebras of the centerless W(2, 2) algebra by studying the maximal good subspaces. Based on this, we construct the dual Lie bialgebra structures of the centerless W(2, 2) Lie bialgebra. As by-products, four new infinite dimensional Lie algebras are obtained.     

流动注射区域采样法测定镀锌钝化液中高浓度锌

本文建立了流动注射二甲酚橙光度法测定镀锌纯化液中Ｚｎ￣２＋的自动分析方法。利用区域采样技术和调整管路参数自动完成对样品的上千倍稀释，确定了最佳分析条件并研究了干扰离子的影响及消除办法。所建方法仪器简单，分析速度为８４次／小时，变异系数（Ｚｎ￣２＋１６．０ｇ／Ｌ，ｎ＝２０）为１．Ｏ％，用于实际钝化液分析，相对误差小于±１０％。     

Theoretical study of halophilic reactions of stable silylenes with chloro- and bromocarbons

A theoretical study of the mechanism of the reaction of stable silylenes with halocarbons has been carried out using the B3LYP density functional method. The main findings are as follows: (1) Lewis acid-base complexes formed between silylenes and halocarbons do not play a role in silylene insertion chemistry into halocarbons; therefore, the acid-base complex mechanism proposed by West et al. (J. Am. Chem. Soc. 2002, 124, 4186) is not appropriate to describe the disilane formation reaction. (2) The disilane formation reactions follow the energetically favorable general reaction pathway (X = halogen): (i) Y2Si: + HCX3 --> TS1 --> Y2XSi-CHX2. (ii) Y2Si: + Y2XSi-CHX2 --> TS2 --> Y2XSi-SiY2CHX2. (3) The observed preference of stable silylenes to undergo C-X bond insertion rather than C-H bond has been investigated. The theoretical findings suggest that this preference is a result of the thermodynamic factor. (4) Stable silylenes prefer to insert into a C-Br rather than a C-Cl bond because the energy barrier to insertion is lower, and the reaction is more exothermic.     

Selected-control synthesis of monodisperse fe(3) o(4) @c core-shell spheres, chains, and rings as high-performance anode materials for lithium-ion batteries

A method is reported for the first time for the selected-control, large-scale synthesis of monodispersed Fe(3) O(4) @C core-shell spheres, chains, and rings with tunable magnetic properties based on structural evolution from eccentric Fe(2) O(3) @poly(acrylic acid) core-shell nanoparticles. The Fe(3) O(4) @C core-shell spheres, chains, and rings were investigated as anode materials for lithium-ion batteries. Furthermore, a possible formation mechanism of Fe(3) O(4) @C core-shell chains and rings has also been proposed.