Influences of high-temperature annealing on atomic layer deposited Al2 O3/4H-SiC

High-temperature annealing of the atomic layer deposition (ALD) of Al2O3 films on 4H-SiC in O 2 atmosphere is studied with temperature ranging from 800℃ to 1000℃. It is observed that the surface morphology of Al2O3 films annealed at 800℃ and 900℃ is pretty good, while the surface of the sample annealed at 1000℃ becomes bumpy. Grazing incidence X-ray diffraction (GIXRD) measurements demonstrate that the as-grown films are amorphous and begin to crystallize at 900℃. Furthermore, C-V measurements exhibit improved interface characterization after annealing, especially for samples annealed at 900℃ and 1000℃. It is indicated that high-temperature annealing in O2 atmosphere can improve the interface of Al2O3 /SiC and annealing at 900℃ would be an optimum condition for surface morphology, dielectric quality, and interface states.     

Efficient and rapid accuracy estimation of the Earth’s gravitational field from next-generation GOCE Follow-On by the analytical method

Firstly, a new analytical error model of the cumulative geoid height using the three-dimensional diagonal tensors of satellite gravity gradiometry (SGG) is introduced based on the variance-covariance matrix principle. Secondly, a study for the requirements demonstration on the next-generation GOCE Follow-On satellite gravity gradiometry system is developed using different satellite orbital altitudes and measurement accuracies of satellite gravity gradiometer by the new analytical error model of SGG. The research results show that it is preferable to design satellite orbital altitudes of 300 km-400km and choose the measurement accuracies of 10-13/s2 -10-15/s2 from satellite gravity gradiometer. Finally, the complementarity of the four-stage satellite gravity missions, including past CHAMP, current GRACE, and GOCE, and next-generation GOCE Follow-On, is contrastively demonstrated for precisely recovering the Earth’s full-frequency gravitational field with high spatial resolution.     

A sensitive method of determining optic axis azimuth based on laser feedback

A sensitive method to determine the optic axis azimuth of the birefringence element is presented, which is based on laser feedback. The phase difference between the two intensities in birefringence feedback changes with the angle between the optic axis of the birefringence element and laser original polarization. The phase difference is highly sensitive to the relative position of the optic axis and the laser original polarization. This method is used to highly precisely determine the optic axis azimuth, and is able to distinguish between the fast axis and the slow axis of the birefringence element. Theoretical analysis and experimental results are both demonstrated.     

Photoinduced charge injection in the metal/organic interface studied by transient photovoltage measurements with bias

Transient photovoltage of ITO/organic/Al cells is studied under different bias polarities and voltages.It is found that for an ITO/NPB/Al cell,light incidence on the Al side induces more bias-dependent transient photovoltage variation when the photovoltage is positive than when it is negative.However,for an ITO/C60 /Al cell,the variation characteristics of transient photovoltage is reversed.These results support the previously proposed mechanism that Al could inject charges into the organic layer upon photon excitation,indicating that the absorption of electrode can also contribute to photovoltaic effect.     

Optimization of direct modulation rate for circular microlasers by adjusting mode Q factor

Semiconductor microcircular lasers have been investigated as potential light sources for photonic integrated circuits and optical interconnections for more than two decades. However, the direct modulation bandwidths of the circular microlasers remain a challenge, especially when being compared with other microlasers, such as photonic crystal lasers. In this paper, microcircular lasers connected to an output waveguide are investigated for high‐speed direct modulation with optimized mode Q factors. Small signal modulation with a resonance frequency of f_R = 12.5 GHz is realized for a AlGaInAs/InP circular microlaser with a radius of 10 µm at 290 K. Furthermore, clear eye diagrams are observed at 12.5 Gbit/s for a 15‐µm radius circular microlaser with f_R = 6.9 GHz.     

A fractal interpretation of size effects on the strength of metallic glasses

Yielding strength of metallic glasses in the uniaxial tensile and compressive tests is scale-dependent, which is attributed to the self-similar distribution of atomic cluster and free volume in the work. In contrast with the Weibull statistical theory previously employed in scaling phenomena of metallic glasses, fractal scaling laws are for the first time applied to describe the size effect inherent to the material disorder. Especially, the Multifractal Scaling Law (MFSL) originally proposed for quasi-brittle materials is used to interpret some experimental data in the literature. The best-fitted parameters (_fy$f_{\mathrm{y}}$ and l_ch) from the MFSL are in good consistency with the bulk yielding strength and the shear band size of metallic glasses observed in the alternative approaches or experiments. The fractal size effect laws provide insight into not only the scaling phenomena, but also further engineering strength predictions and designs.     

Effect of defect configuration on the localization of phonons in two-dimensional phononic crystals

Effects of defect location on the defect frequency and the localization of phonons are investigated in two novel kinds of model, created by moving the location of the native cylinder and inserting an ad-cylinder in the central cellular respectively. The results show that the defect frequency in Model 1 is only related to the distance, while in Model 2, is related not only to the distance, but also to the moving direction. From the pressure distribution, obvious localization phenomenon is found. The position and shape of the localized energy are varied with the position of the defect.     

Trace Elements in Lycium barbarum L. Leaves by Inductively Coupled Plasma Mass Spectrometry after Microwave Assisted Digestion and Multivariate Analysis

The concentrations of 14 elements in Lycium barbarum L. leaves collected from the Qaidam basin (China) were determined by inductively coupled plasma mass spectrometry after microwave assisted digestion. This work presents two goals: (1) to determine 14 elements in L. barbarum leaves; (2) to examine the relationship between elements using correlation analysis, principal component analysis, and cluster analysis. The accuracy and precision were verified against a GBW07605 Tea Leaves certified reference material. The results demonstrated that the method was reliable, reproducible, and suitable for determination of the concentrations of trace elements in L. barbarum leaves. Correlation analysis showed that aluminum–copper, arsenic–zinc, manganese–selenium, and chromium–iron have medium correlation coefficients. Principal component loading for L. barbarum leaves extracted seven components explained about 85% of the total variance. Cluster analysis depicts four clusters: (1) arsenic and titanium; (2) calcium, magnesium, manganese, selenium, and zinc; (3) cobalt, iron, and molybdenum; (4) aluminum, copper, and chromium.     

红外低温相机视轴引出方法

测量红外低温相机的系统调制传递函数(MTF)需要借助于低温平行光管。由于红外低温相机探测器在常温下无法正常工作,并且红外低温相机、低温平行光管离轴抛物镜以及模拟靶标三者是空间分离的,因此实验前需要将相机的视轴引出到平行光管的视轴方向,同时将模拟靶标调整到平行光管焦面位置且靶标中心处于平行光管的中心视场。借助于干涉仪,利用经纬仪分别将相机视轴和平行光管视轴引出到外基准立方镜a和b,通过两立方镜坐标系的方向余弦矩阵关系,将红外低温相机的视轴引出到低温平行光管的视轴方向。对视轴引出精度进行了分析,给出了实验采集的图像。实验结果表明,系统MTF满足要求,同时表明红外低温相机视轴引出方法合理可行。