离子交换聚合物固定三联吡啶钌电玫化学发光传感器的研究进展

将可电化学再生的电致化学发光试剂-三联吡啶钌固定于电极表面制备得到可再生的电致化学发光(ECL)传感器.综述了近年来使用离子交换聚合物膜固定三联吡啶钌ECL传感器的研究进展,简要介绍了不同离子交换聚合物的固定方法及其相关的应用情况.同时展望了该领域未来的发展方向和前景.     

介质极化的瞬时相位与振幅

求解电子运动的二阶微分方程，在旋转波近似下，介质在外场突然变化时产生的瞬态感应极化与外场同频，但相位总是落后，最大落后为π/2；振幅大小与初态有关，随时间按指数规律衰减，衰减快慢由介质的阻尼系数决定。     

卡尔曼滤波紫外光度法同时测定酱油、食醋中的山梨酸和苯甲酸

在酸性条件下，采用乙酸乙酯萃取、Na2HPO4溶液反萃取分离酱汪、食醋中的山梨酸、苯甲酸，卡尔曼滤波法计算结果，并与比值导数波谱法进行比较。结果表明，卡尔曼滤波法较地数波谱法有较高准确度和精密度，并能监测干扰物质存在与否。用于实际样品分析有更高的可靠性。     

标准芳烃及其混合溶液的同步荧光光谱分析

为了提供区分标准芳烃的实验依据,并为环境中芳烃污染检测提供参考.对10个标准芳烃样品(萘、芴、蒽、菲、荧蒽、苊、芘、1,2-苯并[A]蒽、苯并[k]荧蒽、苯并菲)及其混合溶液(蒽、萘、芴混合溶液,苊、荧蒽、菲混合溶液和芘、1,2-苯并[A]蒽、苯并[k]荧蒽、苯并菲混合溶液)的同步荧光特性进行了分析,获得10种标准芳烃标志峰最好时对应的Δλ值及其标志峰位.在此基础上,通过同步荧光光谱分析区分了三种标准芳烃混合溶液的组分,实验发现对蒽、萘、芴混合溶液,Δλ=3nm时最易区分三种组分;对苊、荧蒽、菲混合溶液,Δλ=3nm或Δλ=10nm均可区分三种组分,相对而言,Δλ=10nm更简便些;对芘、1,2-苯并[A]蒽、苯并[k]荧蒽、苯并菲混合溶液,Δλ=5nm时是最好的,但也仅能区分芘、1,2-苯并[A]蒽、苯并[k]荧蒽三种组分,苯并菲不确定.     

针板型电晕稳定开关的电晕稳定性

设计了一款可用于触发和自触发的针板型电晕稳定开关,其中针电极直径为2 mm,主间隙距离为10 mm,触发间隙为5 mm。通过静电场的模拟得知其场强的不均匀系数大于7,并且通过大量实验数据得出:开关起晕电压和击穿电压分别为6.8 kV和19.3 kV,由此得知电晕稳定开关的电晕稳定因子为0.55,这说明开关具有较好的电晕稳定性。     

CaLuBO4∶Tb^3+荧光粉的制备及发光性质

采用高温固相反应法合成了不同Tb^3+掺杂浓度的CaLuBO4∶xTb^3+荧光粉,研究了样品的晶体结构和发光性质。在紫外光激发下,样品的发射光谱由Tb3+离子的5D3→7FJ(J=6,5,4)和5D4→7FJ′(J′=6,5,4,3)特征发射组成,其中位于545 nm和554 nm附近的5D4→7F5跃迁发射强度最大。荧光粉的激发光谱是由位于紫外区的Tb3+的4f-5d和f-f跃迁构成的。研究了Tb3+浓度对样品发光性质的影响。测量并分析了CaLuBO4∶xTb^3+荧光粉的5D3能级和5D4能级荧光寿命。结果表明,CaLuBO4∶xTb^3+是一种适于紫外激发的新型黄绿光荧光粉。     

Facile fabrication and optical properties of novel Pb(OH)Cl nanotubes

Uniform Pb(OH)Cl nanotubes were synthesized for the first time through a reverse micelles system. The system was consisting of C₁₂E₉ as a surfactant, n-pentanol as a cosurfactant, hexamethylene as the continuous oil phase and lead acetate or sodium chloride solution as the dispersed aqueous phase. The obtained Pb(OH)Cl nanotubes have an average outer diameter of 60 nm, inner diameter of about 40 nm, and an length up to 3 μm as TEM picture showed. And the range of the nanotube diameter is from 50 nm to 70 nm. XRD result indicated that Pb(OH)Cl crystallized in an orthorhombic phase. Photoluminescent (PL) spectrum showed that the product emit in near ultraviolet region and visible region at 335 nm and 439 nm respectively. The experimental results show that reaction temperature have effect on the shape of Pb(OH)Cl nanotubes. A possible formation mechanism was also discussed.     

罗布泊遥感影像"耳纹"特征分析及其环境意义

研究典型干旱区的罗布泊,对揭示区域环境演变特征和全球变化具有重要意义.从遥感影像上的"耳纹"特征入手,通过光谱、土壤和地表参数等分析,认为:地表全盐含量和结构差异是形成罗布泊遥感影像"耳纹"特征的直接原因;光谱、全盐含量和土壤粒径的分析结果具有很好的一致性."耳纹"记录下了罗布泊地区的环境演变特征,这些特征表明:受全球环境影响,湖水在气候不断干旱的过程中逐渐干涸,干涸过程的气候调整,使罗布泊地区经历了两次相对湿润的气候环境,前一次较长,后一次很短.     

Geometric and electronic structure of positively and negatively poled LiNbO3 (0 0 0 1) surfaces

The effect of ferroelectric poling direction on the structure and electronic properties of the LiNbO₃ (0 0 0 1) surface was characterized. Low energy and reflection high energy electron diffraction indicated that both the positively and negatively poled surfaces were (1 × 1) with no evidence of longer range periodic reconstructions. Low energy ion scattering spectra from both surfaces were dominated by scattering from oxygen atoms. X-ray and ultraviolet photoelectron spectra also showed little difference between the positively and negatively poled surfaces, with the exception of a high binding energy shoulder on the O 1s core level of the negative surface. Exposure of the surfaces to atomic hydrogen caused reduction of the surface Nb rather than an increase in intensity on the high binding energy side of the O 1s peak, indicating that the shoulder on the O 1s peak on the negative surface was not due to surface hydroxyl groups. Temperature programmed desorption measurements indicated that the nearly stoichiometric LiNbO₃ samples were susceptible to loss of Li₂O starting at temperatures as low as 500 K, independent of the poling direction. An adatom/vacancy model is proposed in which oxygen ad-anions accumulate on one side of the crystal while oxygen anion vacancies are created on the opposite surface. This model can explain the apparent oxygen termination of both surfaces and the observed (1 × 1) periodicity of the surfaces, and also effectively screens the thickness dependent electric field associated with the polar orientation of the crystal.     

Impact of organic contamination in vacuum on laser-induced damage threshold of TiO2/SiO2 dielectric mirrors

The influence of organic contamination in vacuum on the laser-induced damage threshold (LIDT) of coatings is studied. TiO2/SiO2 dielectric mirrors with high reflection at 1064 nm are deposited by the electronbeam evaporation method and their LIDTs are measured in vacuum and atmosphere, respectively.It is found that the contamination in vacuum is easily attracted to optical surfaces because of the low pressure and becomes the source of damage, O2 molecules in vacuum with contamination can accelerate the laser-induced damage by observing LIDT and damage morphologies. LIDTs of mirrors have a little change in vacuum compared with in atmosphere when the organic contamination is wiped off. The results indicate that organic contamination is a significant reason to decrease the LIDT in vacuum.