Widely tunable THz synthesizer

The generation of cw-THz radiation by photomixing is particularly suited to the high resolution spectroscopy of gases; nevertheless, until recently, it has suffered from a lack of frequency metrology. Frequency combs are a powerful tool that can transfer microwave frequency standards to optical frequencies and a single comb has permitted accurate (10⁻⁸) THz frequency synthesis with a limited tuning range. A THz synthesizer composed of three extended cavity laser diodes phase locked to a frequency comb has been constructed and its utility for high resolution gas phase spectroscopy demonstrated. The third laser diode allows a larger tuning range of up to 300 MHz to be achieved without the need for large frequency excursions, while the frequency comb provides a versatile link to be established from any traceable microwave frequency standard. The use of a single frequency comb as a reference for all of the cw-lasers eliminates the dependency of synthesized frequency on the carrier envelope offset frequency. This greatly simplifies the frequency comb stabilization requirements and leads to a reduced instrument complexity.     

Aggregation structure and mechanical properties of functionally graded polyurethane elastomers

Functionally graded polyurethane elastomers (FGPUEs) were prepared with two molds fixed at different temperatures (30 and 150 °C). The effects of the molar ratio of the curing agent (60/40, 75/25, or 97/3 1,4‐butane diol/1,1,1‐trimethylol propane) and the molecular weight of the polymer glycol (number‐average molecular weight = 2000 or 3000) on the molecular aggregation state and mechanical properties of the FGPUEs were investigated with differential scanning calorimetry, polarized optical microscopy, dynamic viscoelastic measurements, and tensile tests. The aggregation state of the FGPUEs was changed continuously from the one side (lower temperature side) to the other side (higher temperature side); for example, the glass‐transition temperature gradually increased in this direction. Also, the number of spherulites formed in the FGPUEs increased in the same manner. In the mechanical tests, the tensile strength and elongation at break of the lower temperature side were higher than those of the higher temperature side. This was correlated with the strong phase separation of the lower temperature side. The poly(oxytetramethylene glycol)‐based FGPUE with a chain extender of 75 wt % showed the largest degree of the temperature gradient. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2355–2363, 2003     

Formation of a liquid organic ion associate in aqueous solution and its application to the GF-AAS determination of trace cadmium in environmental water as a complex with 2-(5-bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropylamino)phenol

The formation of a liquid organic ion associate in an aqueous sample was applied to the concentration and determination of cadmium in environmental water samples. Cadmium was converted into a complex with 2-(5-bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropylamino)phenol (5-Br-PAPS) in a 40-mL sample solution, and was extracted into a liquid ion associate of phenolsulfonate and benzethonium during phase formation. More than 400-fold enrichment was easily attained by this technique, because the volume of the liquid organic phase formed was very small, ca. 2 microL. After dilution of the organic phase with a small volume of 2-methoxyethanol, the cadmium in the solution was determined by GF-AAS. The detection limit was 0.09 ng/L (3sigma(b)). This method was applied to the determination of cadmium in river water and seawater.     

A risk assessment of human ether-a-go-go-related gene potassium channel inhibition by using lipophilicity and basicity for drug discovery

The blockade of human ether-a-go-go-related gene (hERG) potassium channels is widely regarded as the predominant cause of drug-induced QT prolongation. The correlation analysis between the inhibition of the hERG channel (hERG inhibition) and physicochemical properties was investigated by use of in-house quinolone antibiotics as model compounds. In order to establish a simple prediction model of hERG inhibition, we focused on the comprehensible physicochemical parameters such as lipophilicity (log P) and basicity (pK(a)). At first, the risk associated with increasing log P and pK(a) was examined by statistical analysis. It was demonstrated that the risk associated with increasing log P and pK(a) by one unit, respectively, almost identically increased. Consequently, equal attention should be paid to both parameters on hERG inhibition. Next, a prediction model of hERG inhibition which was represented by log P and pK(a) was investigated. As a result, we built the stepwise discriminant prediction model which took advantage of the risk judgment by zone classification. In conclusion, the impact of log P and pK(a) on hERG inhibition was clarified relatively and quantitatively. The quantitative risk assessment established based on both parameters, was considered to be a practical and useful tool in avoiding hERG inhibition and in the rational drug design for drug discovery, especially in lead optimization. Moreover, we also carried out a trend analysis using a different derivative and demonstrated that both parameters were equally significant for hERG inhibition.