Identification of the origin of chondroitin sulfate in "health foods"

Twelve "health foods" products containing chondroitin sulfate (CS) were purchased from the Japanese market and the origin of the CS was investigated by conducting disaccharide compositional analysis after enzymatic depolymerization and by 1H-NMR spectroscopy. Nine of the 12 products had labels indicating that the origin of the CS was shark cartilage. However, two of them were found to contain mammalian CS. Next, we compared the ratio of the sulfate group to the galactosamine residue after the acid hydrolysis of CS. The results suggest that all of the CS from sharks had a ratio of more than 1.0, while the CS from mammals had a ratio of less than 1.0. Since this comparative analysis does not require expensive purified enzyme, it would be an economical way to identify the origin of CS in "health foods." Being able to determine the origin of the ingredients in natural products is very important for ensuring their quality, safety, and efficacy. Therefore, we think that regulatory requirements for accurately indicating the origin of "health foods" and effective enforcement of these requirements are needed.     

The ruthenium-catalyzed reduction and reductive N-alkylation of secondary amides with hydrosilanes: practical synthesis of secondary and tertiary amines by judicious choice of hydrosilanes

A triruthenium cluster, (mu3,eta2,eta3,eta5-acenaphthylene)Ru3(CO)7 (1) catalyzes the reaction of secondary amides with hydrosilanes, yielding a mixture of secondary amines, tertiary amines, and silyl enamines. Production of secondary amines with complete selectivity is achieved by the use of higher concentration of the catalyst (3 mol %) and the use of bifunctional hydrosilanes such as 1,1,3,3-tetramethyldisiloxane. Acidic workup of the reaction mixture affords the corresponding ammonium salts, which can be treated with a base, providing a facile method for isolation of secondary amines with high purity. In contrast, tertiary amines are formed with high selectivity by using lower concentration of the catalyst (1 mol %) and polymeric hydrosiloxanes (PMHS) as reducing agent. Reduction with PMHS encapsulates the ruthenium catalyst and organic byproducts to the insoluble silicone resin. The two reaction manifolds are applicable to various secondary amides and are practical in that the procedures provide the desired secondary or tertiary amine as a single product. The product contaminated with only minimal amounts of ruthenium and silicon residues. On the basis of the products and observed side products as well as NMR studies a mechanistic scenario for the reaction is also described.     

Time-resolved in situ ATR-IR observations of the process of sorption of water into a poly(2-methoxyethyl acrylate) film

A process of water sorption into a biocompatible polymer, poly(2-methoxyethyl acrylate) (PMEA), was investigated by time-resolved, in situ, attenuated total reflection infrared spectroscopy. Evidence for three different types of hydrated water in PMEA, that is, nonfreezing water, freezing bound water, and freezing water, were found. Each hydration structure was elucidated at the functional group level. Nonfreezing water, which never crystallizes, even at -100 degrees C, has a C=O...H-O type of hydrogen bonding interaction with the carbonyl group of PMEA. Freezing bound water, which crystallizes in a heating process below 0 degrees C, interacts with the methoxy moiety in the PMEA side chain terminal. Freezing water, which crystallizes approximately 0 degrees C, has bulk-water-like structure with an O-H...O-H hydrogen bonds network. It has been concluded from the present study that the methoxy moiety in the PMEA side chain terminal plays an important role for the excellent biocompatibility of PMEA.     

Infrared Spectroscopy and X-Ray Diffraction Studies of C?H…O Hydrogen Bonding and Thermal Behavior of Biodegradable Poly(hydroxyalkanoate)

Infrared (IR) spectra and wide-angle X-ray diffraction (WAXD) patterns of poly(3-hydroxybutyrate) (PHB) and its copolyester, poly(3-hydroxybutyrate-co-3-hydroxyhexanoate), P(HB-co-HHx) (HHx = 12 mol%) were measured over a temperature range of 20 °C to higher temperatures (PHB, 185 °C, HHx = 12 mol%, 140 °C) to explore their structure change and thermal behavior and molecular interaction. The WAXD measurements revealed that the a lattice parameter increases significantly with temperature, while the b lattice parameter varies a little in the crystalline PHB and P(HB-co-HHx). It seems that the intermolecular interaction between the CO group of one helical structure and the CH₃ group of the other helical structure decreases along the a axis of crystalline PHB and P(HB-co-HHx) with temperature. The temperature-dependent IR spectral variations were analyzed for the CH stretching, CO stretching, CH₃ deformation, and C O C stretching variation regions, and bands characteristic of crystalline and amorphous parts were identified in each region. It was found from the anomalous frequencies of the CH₃ asymmetric stretching and CO stretching bands of PHB and P(HB-co-HHx) and the X-ray crystallographic structure of PHB that there is an intermolecular interaction (C H…OC hydrogen bond) between the CO group and the CH₃ group combining two helical structures in PHB and P(HB-co-HHx). In this review paper we discuss the role of the C H…OC hydrogen bonding and the crystal and lamella structure of PHB and P(HB-co-HHx) (HHx = 12 mol %) in comparison with the structure of Nylon.     

FTIR studies of conformational energies of poly(acrylic acid) in cast films

Fourier transform infrared (FTIR) spectroscopic measurements have been undertaken to estimate the conformational energies of poly(acrylic acid) (PAA) cast films in the temperature range of 40–130°C. The temperature dependence of the IR spectra in the C=O stretching region has been analyzed to yield the side-chain and backbone conformational energies. The estimated energies are close to those previously obtained by polarized Raman spectroscopic measurements for PAA solutions. Combining the FTIR value of conformational energy with the simplified rotational isomeric state (RIS) model proposed in the Raman analysis provides a persistence length in accordance with earlier SAXS experiments. The data also agree with the Gibbs-DiMarzio predictions, further substantiating the validity of the analysis. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys, 35: 507–515, 1997     

Effects of Lower-limb Muscle Fatigue,Cardiopulmonary Fatigue,and Brain FatigueTasks on One-legged Landing Motion

Objective: Anterior cruciate ligament (ACL) injury is one of the most frequent sportsinjuries, and previous studies have shown that fatigue is a risk factor for sports injuries.This study aimed to inform prevention of ACL injury by investigating how exercise and desk tasks affect trunk and lower limb alignment and ground reaction force (GRF) during one-legged landing movements. Methods: The study subjects were 12 men who performed a one-legged landing movement from a 30-cm platform before and after fatigue tasks, including lower-limb muscle fatigue, cardiopulmonary fatigue, and brain fatigue tasks. For the measurement of joint angles and moments and GRF, a three-dimensional motion analysis device and a floor reaction-force meter were used. Statistics were performed using Wilcoxon''s signed rank sum test as a multiple comparison test with Bonferroni adjustment to compare the difference in effects. Results: The maximum trunk flexion angle during landing on one leg was significantly lower in the brain fatigue group than in the control group. The time to peak vertical GRF (pGRF) was significantly shorter in the leg-muscle fatigue group than in the control group. Conclusion: Brain fatigue may have altered the postural strategy before and after landing, resulting in a decrease in trunk flexion angle. Time to pVGRF was shortened in the leg muscle fatigue group, suggesting that there may be an increased risk of ACL injury. Time to pVGRF during lower extremity muscle fatigue and trunk flexion angle during brain fatigue may be more pronounced during actual sports activities.     

Near-Infrared Imaging Using a High-Speed Monitoring Near Infrared Hyperspectral Camera(Compovision)

This review paper reports near-infrared (NIR) imaging studies using a newly-developed NIR camera, Compovision. Compovision can measure a significantly wide area of 150 mm×250 mm at high speed of between 2 and 5 s. It enables a wide spectral region measurement in the 1 000～2 350 nm range at 6 nm intervals. We investigated the potential of Compovision in the applications to industrial problems such as the evaluation of pharmaceutical tablets and polymers. Our studies have demonstrated that NIR imaging based on Compovision can solve several issues such as long acquisition times and relatively low sensitivity of detection. NIR imaging with Compovision is strongly expected to be applied not only to pharmaceutical tablet monitoring and polymer characterization but also to various applications such as those to food products, biomedical substances and organic and inorganic materials.     

Molecular origin for rheological characteristics of native gellan gum

The ¹H-nuclear magnetic resonance spectrum showed that the l-rhamnosyl residues of native gellan gum were coinvolved in both a small number of ⁴C₁-pyranose conformations and a large number of ¹C₄-pyranose conformations, whereas for deacylated polymer, almost of the residues were involved in ⁴C₁-pyranose conformation. The flow curves of native gellan gum showed plastic behavior above 0.2%. The elastic modulus stayed at a constant value with increase in temperature up to 40 °C, then decreased rapidly. The elastic modulus increased with addition of CaCl₂ (6.8 mM) and stayed constant value with increase in temperature up to 65 °C, then decreased rapidly. The stronger elastic modulus was observed in deacylated gellan gum with addition of CaCl₂. The elastic modulus of native gellan gum showed larger value than that in aqueous solution in the presence of urea (4.0 M). Intra- and intermolecular associations of native gellan gum molecules in the presence of Ca⁺² were proposed.     

Specific crystal structure of poly(3-hydroxybutyrate) thin films studied by infrared reflection–absorption spectroscopy

Infrared reflection–absorption (IR-RAS) and transmission spectra were measured for poly(3-hydroxybutyrate) (PHB) thin films to explore its specific crystal structure in the surface region. As IR-RAS is sensitive to the vibration mode of perpendicular orientation of the surface, differences between IR-RAS and transmission spectra indicate an orientation of the lamella structure in the surface of PHB thin films. The relative intensity of the crystalline CO stretching band in the IR-RAS spectrum is significantly weaker than that in the transmission spectrum. It may be concluded that the transient dipole moment of the CO stretching mode of the crystalline state is not oriented perpendicular but nearly parallel to the substrate surface. On the other hand, the relative intensity of the band at 3009 cm⁻¹ due to the C–H stretching mode of the C–HOC hydrogen bonding is similar between the IR-RAS and transmission spectra, suggesting that the C–H bond is oriented neither perpendicular nor parallel to the substrate surface but in an intermediate direction. Since the CO group of the C–HOC hydrogen bonding is oriented nearly parallel to the surface and its C–H group is in the intermediate direction, it is very likely that the C–HOC hydrogen bonding has a somewhat bent structure. These results are in good agreement with our previous conclusion that the C–HOC hydrogen bonding of PHB exists along the a-axis (not the b-axis) between the CH₃ group of one helix and the CO group of another helix.