Thermal behavior and dismantlability of adhesives containing various inorganic salts

As a fundamental study on the development of dismantlable adhesives containing chemically reactive materials, the thermal behavior and dismantlability of an epoxy adhesive containing one of the twenty-seven inorganic salts (chlorides, perchlorates, and nitrates) were observed. In the thermal behavior measured by the differential scanning calorimetry, epoxy adhesives with inorganic salts containing iron, copper, zinc, and aluminum cations released heats of reaction at lower temperatures than the adhesive alone or the adhesives with other inorganic salts. Since such inorganic salts were considered to be effective candidates as fillers in dismantlable adhesives, the adhesion strengths of their mixtures with the adhesive were observed after heat aging at 270 °C for 30 min. The results showed that both chloride and perchlorate salts specifically decreased the adhesion strength after heating. On the other hand, the effect of nitrate salts on the decrease in adhesion strength was low in comparison with the chloride and perchlorate salts.     

Characterization of posticlure and the structure-related sex pheromone candidates prepared by epoxidation of (6Z,9Z,11E)-6,9,11-trienes and (3Z,6Z,9Z,11E)-3,6,9,11-tetraenes

trans-11,12-Epoxy-(6Z,9Z)-6,9-henicosadiene (posticlure) has been identified from a pheromone gland of the lymantriid species, Orgyia postica. Since the diversity of Lepidoptera suggests that some species utilize the structure-related epoxy compound as a sex pheromone component, epoxydienes and epoxytrienes derived from (6Z,9Z,11E)-6,9,11-trienes and (3Z,6Z,9Z,11E)-3,6,9,11-tetraenes with a C₁₉–C₂₁ chain were systematically synthesized and the chemical data were accumulated in order to contribute to a new pheromone research. Peracid oxidation of each triene and each tetraene produced, respectively, a mixture of three epoxydienes (cis-6,7-epoxy-9,11-diene; cis-9,10-epoxy-6,11-diene; and trans-11,12-epoxy-6,9-diene) and four epoxytrienes (cis-3,4-epoxy-6,9,11-triene; cis-6,7-epoxy-3,9,11-triene; cis-9,10-epoxy-3,6,11-triene; and trans-11,12-epoxy-3,6,9-triene). While the 9,10-epoxy compounds were unstable and, interestingly, converted into 9-ketone derivatives after chromatography over SiO₂, each positional isomer was isolated by HPLC equipped with an ODS column, and the chemical structure was determined by NMR analysis. On the GC-MS analysis with a DB-23 column, the positional isomers were also eluted separately and characteristic mass spectra were proposed. By comparing the spectral data of the epoxy compounds with a different carbon chain, diagnostic fragment ions reflecting the chemical structure were determined as follows: m/z 79, 109, 113, and M-114 for the 6,7-epoxydienes; m/z 69, 97, 111, 139, and M-111 for the 9,10-epoxydienes; m/z 57, 79, 109, 136, M-151, and M-111 for the 11,12-epoxydienes; m/z 79, 91, 105, and 119 for the 3,4-epoxytrienes; m/z 79, 124, M-124, M-96, and M-69 for the 6,7-epoxytrienes; m/z 79, 95, 109, 137, and M-108 for the 9,10-epoxytrienes; and m/z 79, 134, M-149, M-109, and M-95 for the 11,12-epoxytrienes.     

Decreased l-tryptophan concentration in distinctive brain regions of mice treated repeatedly with phencyclidine

It has been reported that repeated phencyclidine (PCP) treatment induces schizophrenia-like behavior in mice. l-Tryptophan (Trp) concentrations in brain tissues of control (n?=?8) and PCP-treated mice (10 mg/kg/day, s.c., 14 days, n?=?10) were determined using high-performance liquid chromatography (HPLC) with fluorescence detection. The HPLC method involved pre-column fluorescence derivatization with (R)-(?)-4-(N,N-dimethylaminosulfonyl)-7-(3-isothiocyanatopyrrolidin-1-yl)-2,1,3-benzoxadiazole (DBD-PyNCS). Eight different parts of the brain, namely, the frontal cortex, nucleus accumbens, striatum, hippocampus, amygdala, thalamus, hypothalamus, and cerebellum, of both groups were investigated. A significant decrease in the l-Trp concentration in the nucleus accumbens (p?=?0.024) and hippocampus (p?=?0.027) was observed in PCP-treated mice, suggesting that alteration of the l-Trp metabolism might occur in these brain parts.     

Microwave-Accelerated Selective Acylation of (Hydroxyalkyl)phenols Using Acid Chlorides

Highly selective acylation of the alcoholic hydroxy group can be achieved with (hydroxyalkyl)phenols carrying both alcoholic and phenolic hydroxyls by the use of the most common acylating agents, acid chlorides, under microwave irradiation.     

Time Courses and Time‐Resolved Spectra of Firefly Bioluminescence Initiated by Two Methods of ATP Injection and Photolysis of Caged ATP

The time‐dependent characteristics of firefly bioluminescence initiated by manual injection of adenosine triphosphate (ATP) into buffer solution containing luciferin (Ln), luciferase (Luc) and Mg²⁺ were measured with a resolution of 10 ms, and compared with those obtained by photolysis of caged ATP. The time course depends on pH; both rise and decay rates decrease when pH is lowered from 7.8 to 6.8. In contrast, the parameter λ in the kinetic formula related to diffusion of ATP is almost independent of pH. The pH dependence of the time course of bioluminescence can be explained by the same pH tendency as the rate of ATP binding at the active site of Luc. The time‐resolved spectra can be decomposed into two Gaussian components with maxima at 2.2 and 2.0 eV. At pH 7.8, the band at 2.2 eV is more intense than that at 2.0 eV for all three concentration conditions. At lower pH, the band at 2.2 eV becomes weaker than that at 2.0 eV. The intensity ratio of the 2.0 and 2.2 eV bands is constant for duration time of 600 s for both injection and photolysis experiments, and the above conclusions are unaffected by the concentration ratio [Ln]/[Luc].     

Mechanistic study of asymmetric Michael addition of malonates to enones catalyzed by a primary amino acid lithium salt

A mechanistic study was carried out for the asymmetric Michael addition reaction of malonates to enones catalyzed by a primary amino acid lithium salt to elucidate the origin of the asymmetric induction. A primary β-amino acid salt catalyst, O-TBDPS β-homoserine lithium salt, exhibited much higher enantioselectivity than that achieved with the corresponding catalysts derived from α- and γ-amino acids for this reaction. Detailed studies of the transition states with DFT calculations revealed that the lithium cation and carboxylate group of the β-amino acid salt catalyst have important roles in achieving high enantioselectivity in the Michael addition reaction of malonates to enones.     

Synthesis of 2,3-dihydro-1H-isoindole-1-thiones via the bromine–lithium exchange between 1-bromo-2-(1-isothiocyanatoalkyl)benzenes and butyllithium

The reaction of 1-bromo-2-(1-isothiocyanatoalkyl)benzenes, which are easily derived from 2-bromophenyl ketones or (2-bromophenyl)methanamine, with butyllithium generates 1-(1-isothiocyanatoalkyl)-2-lithiobenzenes, which immediately underwent intramolecular cyclization to give rise to the corresponding 3-substituted and 3,3-disubstituted 2,3-dihydro-1H-isoindole-1-thiones in good yields.     

Improved synthesis of (R)-7-hydroxycarvone from (S)-α-pinene

A three-step synthesis of (R)-7-hydroxycarvone (1), which is anticipated to be a valuable building block for the versatile preparation of natural products, is described. Optimization of the reaction conditions for photooxygenation and migration of (S)-α-pinene 2, tetrapropylammonium perruthenate (TPAP) oxidation of the generated alcohol, and a subsequent ring-opening reaction in the presence of Cu(OTf)₂ led to the synthesis of 1 with good reproducibility. The desired product 1 was thus obtained in 46% yield over three steps.     

Synthesis and properties of polyfluoro(silyl)acetylene nanoparticles by reaction of fluoro(silyl)acetylenes with triethylamine

Fluoro(silyl)acetylenes, which were prepared by reaction of 1,1-difluoroethylene with silyl chlorides, reacted with triethylamine to give dark-brown colored polyfluoro(silyl)acetylene powders in excellent to moderate isolated yields. In contrast, the corresponding nonfluorinated acetylene was unable to react with triethylamine at all to afford poly(silyl)acetylene under similar conditions. Polyfluoro(silyl)acetylenes thus obtained were nanometer size-controlled cubic fine particles with a good dispersibility and stability in a variety of solvents. These polyfluoro(silyl)acetylene nanoparticles exhibited clear absorption and emission spectra related to the conjugated units in polymer main chain. Furthermore, these polyfluoro(silyl)acetylene nanoparticles were applied to the surface modification of poly(methyl methacrylate) [PMMA] film to exhibit a higher oleophobicity imparted by fluorine on their surface, compared to that on the reverse side.