Thermodynamic study of niobium oxides with ONb ratios from 2.47 to 2.50 using a high-temperature galvanic cell

The partial molar free energy, enthalpy, and entropy of oxygen in niobium oxides with $\text{O}\text{Nb}$ ratios from 2.47 to 2.50 were measured with a galvanic cell in the temperature range from 1084 to 1325 K. The partial molar enthalpies of oxygen of the Nb₂O_5?x and V phases were observed to be nearly independent of composition, indicating the presence of only weak interactions between defects. The value of the slope for the plots of log x in Nb₂O_5?x against log P_O2 was observed to be $\text{?1}\text{5.2}$ which is interpreted in terms of a defect structure involving both singly ionized and doubly ionized oxygen vacancies. The previously proposed phase diagram in the vicinity of Nb₂O_5?x was confirmed by the present emf measurements.     

Immobilization of ultra-thin layer of monoclonal antibody on glass surface

When preparing an affinity column and a biosensor, it is desirable to immobilize a unimolecular layer of pure protein on a matrix. In this work, we tried to immobilize a monoclonal antibody on a surface of a glass test-tube as a model, to confirm the stability of this ultra-thin layer by an enzyme immunoassay, and to estimate the thickness of the layer on a slide glass by Fourier transform infrared reflection spectrometry. A new test-tube was washed and dried. The tube was filled with 5% 3-aminopropyltriethoxysilane. The 3-aminopropylsilylated surface was treated with glutaraldehyde and 5.6.10(-2) mg/ml solution of a normal mouse monoclonal antibody. The Schiff base between glutaraldehyde and the antibody was further reduced with 7.9.10(-3)% NaBH4. The tube was washed with 0.05% Tween 20 to block non-specific binding. The antibody immobilized on the surface was measured by an enzyme immunoassay based on a reaction of anti-mouse immunoglobulin G labelled with alkaline phosphatase, with which p-nitrophenol was produced from p-nitrophenylphosphate as a substrate. Meanwhile, various amounts of the antibody were immobilized on slide glasses in the same manner. The antibody on each surface was measured by Fourier transform infrared reflection spectrometry. The antibody immobilized under the final conditions was detectable by the enzyme immunoassay, and stable at 4 degrees C for ten days. The antibody on the slide glass was a unimolecular layer, as judged from the Fourier transform infrared spectra referred to -CONH- band semiquantitatively. Thus, we found the optimal conditions for immobilizing an ultra-thin layer of the monoclonal antibody on the glass surface.(ABSTRACT TRUNCATED AT 250 WORDS)     

A regio- and stereoselective alpha-methylation of gamma,delta-epoxy-alpha,beta-unsaturated esters with a Me2Zn-CuCN reagent

A highly regio- and stereoselective alpha-methylation reaction of gamma,delta-epoxy-alpha,beta-unsaturated esters was achieved by using a Me2Zn-CuCN reagent.     

Circularly polarized luminescence (CPL) characteristics of hydrophobic pyrene derivatives/γ-cyclodextrin (γ-CD) complexes in aqueous solution dissolved by grinding

Circularly polarized luminescence (CPL) organic dyes are currently receiving a great interest, but there are still not many reported observations of CPL spectra of hydrophobic dyes from aqueous solution. We have prepared hydrophobic pyrene derivatives and dissolved them into aqueous solutions with γ-cyclodextrin (γ-CD) by using grinding technique. Among these derivatives, (pyrene-1-carbonyl)serine (PySer) forms a spatially restricted dimer in the hydrophobic chiral cavity of γ-CD and exhibits excimer emission with a high quantum yield of Φ_f?=?0.68. In addition, circular dichroism and CPL signals were induced for the complex. The strong g_CPL value of g_CPL?=?+?2.2?×?10^?3 was obtained, which may be attributed to the interaction between the hydroxyl groups in the side chain of PySer with those of γ-CD and it strengthens the chiral dimeric structure.

Graphic abstract

     

Bifunctional organocatalysts for enantioselective aza-Morita-Baylis-Hillman reaction

The efficient and novel bifunctional organocatalyst for the enantioselective aza-Morita-Baylis-Hillman (aza-MBH) reaction has been established with (S)-3-(N-isopropyl-N-3-pyridinylaminomethyl)BINOL for the first time. The reaction proved to be deeply influenced by the position of the Lewis base attached to BINOL. The acid-base-mediated functionalities for the activation of the substrate and the fixing of conformation of the organocatalyst are harmoniously performed to promote the reaction with high enantiocontrol.     

Separation and purification of uridine diphosphate-glucuronosyltransferases by chromatofocusing on a high-performance liquid chromatograph

A rapid method for the separation and purification of uridine diphosphate-glucuronosyltransferases (GT) was developed with the use of chromatofocusing on a high-performance liquid chromatograph. GT isoenzymes solubilized from hepatic microsomes of Wistar rats were separated on a Mono P column, a pre-packed column for chromatofocusing. Using 4-nitrophenol, testosterone and androsterone as substrates, four fractions with different GT activities were separated in a pH gradient from 9.5 to 7.0. Two isoenzymes, testosterone GT and androsterone GT were purified to apparent homogeneity. They were eluted at pH 8.9 and 8.0 and had subunit molecular weight values of 50000 and 52000, respectively. Approximately 10 mg of solubilized microsomal proteins was applied and the elution was completed within 2 h. Addition of N-nitrodiethylamine, an in vitro activator of GT activity, enhanced the GT activity toward 4-nitrophenol in the three fractions. This chromatographic analysis confirmed the absence of androsterone GT isoenzyme in LA Wistar rats, a mutant strain in terms of androsterone glucuronidation.     

Fabrication of polymer Langmuir-Blodgett films containing regioregular poly(3-hexylthiophene) for application to field-effect transistor

Semiconducting thin films consisting of regioregular poly(3-hexylthiophene) (RR-PHT) and poly(N-dodecylacrylamide) (pDDA) were constructed by the Langmuir-Blodgett (LB) technique. A mixture of RR-PHT and pDDA spread from a chloroform solution on a water surface forms a stable monolayer, which can be transferred onto solid substrates by the LB method, yielding a well-defined polymer LB film. Surface morphology studies of the LB film indicate that the RR-PHT is dispersed uniformly throughout the surface. The polymer thin film was chemically doped by contacting with FeCl3 acetonitrile solution, and a conductivity of 5.6 S/cm was achieved. Further, the LB film was utilized as the semiconducting film in the field-effect transistor (FET), and mobilities of 2.2 x 10(-4) and 4.4 x 10(-4) cm2 V(-1) s(-1) were obtained by analyzing the saturated and linear regions of the current-voltage characteristic, respectively.     

Ethylene and propylene polymerization behavior of a series of bis(phenoxy–imine)titanium complexes

This contribution reports ethylene and propylene polymerization behavior of a series of Ti complexes bearing a pair of phenoxy–imine chelate ligands. The bis(phenoxy–imine)Ti complexes in conjunction with methylalumoxane (MAO) can be active catalysts for the polymerization of ethylene. Unexpectedly, this C₂ symmetric catalyst produces syndiotactic polypropylene. ¹³C NMR spectroscopy has revealed that the syndiotacticity arises from a chain-end control mechanism. Substitutions on the phenoxy–imine ligands have substantial effects on both ethylene and propylene polymerization behavior of the complexes. In particular, the steric bulk of the substituent ortho to the phenoxy–oxygen is fundamental to obtaining high activity and high molecular weight for ethylene polymerization and high syndioselectivity for the chain-end controlled propylene polymerization. The highest ethylene polymerization activity, 3240 kg/mol-cat h, exhibited by a complex having a t-butyl group ortho to the phenoxy–oxygen, represents one of the highest reported to date for Ti-based non-metallocene catalysts. Additionally, the polypropylene produced exhibits a T_m, 140 °C, and syndioselectivity, rrrr 83.7% (achieved by a complex bearing a trimethylsilyl group ortho to the phenoxy–oxygen) that are among the highest for polypropylenes produced via a chain-end control mechanism. Hence, the bis(phenoxy–imine)Ti complexes are rare examples of non-metallocene catalysts that are useful for the polymerization of not only ethylene but also propylene.     

Phase behavior of sucrose monoalkanoate in a water-long-chain alcohol system

Phase diagram of a water/sucrose monododecanoate (SE)/hexanol system was determined at 30°C. Aqueous micellar, reverse micellar, normal hexagonal liquid crystalline, and lamellar liquid crystalline phases appear in the phase diagram. The change in interlayer spacing and interfacial section area of surfactant in the liquid crystalline phases was investigated by small-angle x-ray scattering. Upon addition of water, the section area and the radius of cylindrical aggregates are almost constant in a hexagonal liquid crystal, whereas the distance between each cylinder is separated on the water-SE axis. The interlayer spacing slightly decreases or is almost unchanged on the surfactant-hexanol axis, because alcohol molecules penetrate into the palisade of bilayers. Although the average section area decreases with increasing alcohol content, each section area of SE and alcohol molecules are kept constant. Since the interfacial section area of alcohol is less than the section area of hydrocarbon chain, the phase transition from lamellar liquid crystal to reverse micelle occurs in an alcohol-rich region.     

Crystal structure of the parent misfit-layered cobalt oxide [Sr2O2]qCoO2

The crystal structure of our newly discovered Sr-Co-O phase is investigated in detail through high-resolution electron microscopy (HREM) techniques. Electron diffraction (ED) measurement together with energy dispersive X-ray spectroscopy (EDS) analysis show that an ampoule-synthesized sample contains an unknown Sr-Co-O ternary phase with monoclinic symmetry and the cation ratio of Sr/Co=1. From HREM images a layered structure with a regular stacking of a CdI₂-type CoO₂ sheet and a rock-salt-type Sr₂O₂ double-layered block is observed, which confirms that the phase is the parent of the more complex “misfit-layered (ML)” cobalt oxides of [M_mA₂O_m+2]_qCoO₂ with the formula of [Sr₂O₂]_qCoO₂, i.e. m=0. It is revealed that the misfit parameter q is 0.5, i.e. the two sublattices of the CoO₂ sheet and the Sr₂O₂ block coexist to form a commensurate composite structure. We propose a structural model with monoclinic P2₁/m symmetry, which is supported by simulations of ED patterns and HREM images based on dynamical diffraction theory.