Construction of Helically Stacked π-Electron Systems in Poly(quinolylene-2,3-methylene) Stabilized by Intramolecular Hydrogen Bonds

π-Stacked polymers, which consist of layered π-electron systems in a polymer, can be expected to be used in molecular electronic devices. However, the construction of a stable π-stacked structure in a polymer is considerably challenging because it requires sophisticated designs and precise synthetic methods. Herein, we present a novel π-stacked architecture based on poly(quinolylene-2,3-methylene) bearing alanine derivatives as the side chain, obtained through the living cyclo-copolymerization of an o-allenylaryl isocyanide. In the resulting polymer, the neighboring quinoline rings of the main chain form a layered structure with π–π interactions, which is stabilized by intramolecular hydrogen bonds. The vicinal quinoline units form two independent helices and the whole molecule is a twisted-tape structure. This structure is established on the basis of UV/CD spectra, theoretical calculations, and atomic-force microscopy.     

Mechanical and tribological properties of DLC coatings deposited by plasma-based ion implantation and deposition method on polyoxymethylene

Polyoxymethylene (POM, polyacetal) is one of the most popular plastics for machine elements, especially in Japan. However, it is difficult to use it under severe operating conditions such as high speed and high contact pressure. Diamond-like carbon (DLC) coatings were well known to be tribological and functional coatings. However, both POM and DLC coatings are difficult to adhere them each other. In the present paper, DLC coatings are deposited by plasma-based ion implantation and deposition (PBIID) method on POM substrate, and validity of DLC coatings on POM was investigated through friction and mechanical tests. When gas pressure was 0.2 and 0.8 Pa, hardness and adhesion properties of DLC coating deposited under gas pressure of 0.5 Pa were lower compared with under 0.2 and 0.8 Pa. For preparing DLC coatings having hard and good adhesion properties, relatively thin substrate was suitable. A correlation between relative humidity in the laboratory and friction coefficient was confirmed while DLC coatings remain on the substrate.     

Silaboration of [1.1.1]Propellane: A Storable Feedstock for Bicyclo[1.1.1]pentane Derivatives

The silaboration of [1.1.1]propellane enables direct introduction of B and Si functional groups onto the bicyclo[1.1.1]pentane (BCP) scaffold in high yield under mild, additive‐free conditions. The silaborated BCP can be obtained on a gram‐scale in a single step without the need for column‐chromatographic purification, and is storable and easy to handle, providing a versatile synthetic intermediate for BCP derivatives. We also describe various conversions of the C?B/C?Si bonds on the BCP scaffold, including development of a modified Suzuki–Miyaura cross‐coupling reaction at the highly sterically hindered bridgehead sp³ carbon center of the BCP skeleton using a combination of highly activated BCP boronic esters, copper(I) oxide, and a PdCl₂(dppf) catalyst system.     

Unprecedented Sequence Control and Sequence‐Driven Properties in a Series of AB‐Alternating Copolymers Consisting Solely of Acrylamide Units

Herein, we report a method to synthesize a series of alternating copolymers that consist exclusively of acrylamide units. Crucial to realizing this polymer synthesis is the design of a divinyl monomer that contains acrylate and acrylamide moieties connected by two activated ester bonds. This design, which is based on the reactivity ratio of the embedded vinyl groups, allows a “selective” cyclopolymerization, wherein the intramolecular and intermolecular propagation are repeated alternately under dilute conditions. The addition of an amine to the resulting cyclopolymers afforded two different acryl amide units, i.e., an amine‐substituted acryl amide and a 2‐hydroxy‐ethyl‐substituted acryl amide in alternating sequence. Using this method, we could furnish ten types of alternating copolymers; some of these exhibit unique properties in solution and in the bulk, which are different from those of the corresponding random copolymers, and we attributed the differences to the alternating sequence.     

Construction of Helically Stacked π‐Electron Systems in Poly(quinolylene‐2,3‐methylene) Stabilized by Intramolecular Hydrogen Bonds

π‐Stacked polymers, which consist of layered π‐electron systems in a polymer, can be expected to be used in molecular electronic devices. However, the construction of a stable π‐stacked structure in a polymer is considerably challenging because it requires sophisticated designs and precise synthetic methods. Herein, we present a novel π‐stacked architecture based on poly(quinolylene‐2,3‐methylene) bearing alanine derivatives as the side chain, obtained through the living cyclo‐copolymerization of an o‐allenylaryl isocyanide. In the resulting polymer, the neighboring quinoline rings of the main chain form a layered structure with π–π interactions, which is stabilized by intramolecular hydrogen bonds. The vicinal quinoline units form two independent helices and the whole molecule is a twisted‐tape structure. This structure is established on the basis of UV/CD spectra, theoretical calculations, and atomic‐force microscopy.     

化学衍生辅助液相色谱-串联质谱测定枇杷膏中的齐墩果酸和熊果酸

建立了一种液相色谱-串联质谱(LC-MS/MS)同时测定齐墩果酸和熊果酸含量的分析方法,利用衍生化试剂N,N-二甲基乙二胺(DMED)和d4-N,N-二甲基乙二胺(d4-DMED)分别衍生样品和标准工作溶液中的目标分析物,并将标准工作液的衍生产物作为稳定同位素内标。该方法线性关系良好,相关系数均0.99;齐墩果酸和熊果酸的检出限(S/N=3)分别为0.92 ng/L和1.06 ng/L,加标回收率分别为98.7%~102.7%和97.2%~105.0%。该方法简单、快速、准确,可满足枇杷膏中齐墩果酸和熊果酸高灵敏度检测的需求。     

New fabrication approach to develop a high birefringence photo-crosslinked film based on a sulfur-containing liquid crystalline molecule with large temperature dependence of birefringence

ABSTRACT

We present a new fabrication approach to achieve a high birefringence film by means of photopolymerization based on an alkylthio-containing rod-like liquid crystalline molecule exhibiting large temperature dependence of birefringence. We designed a new reactive mesogen having alkylthio linkages (BPM–S). It was found that BPM–S had a larger increment of birefringence with decreasing temperature, relative to commercially available alkoxy analog LC242. This result could be thought to be due to enhanced intermolecular attractive interaction for an alkylthio mesogen implied by the proximity of laterally neighboring molecules and cybotactic nematic tendency based on wide-angle X-ray measurement. The uniaxially-aligned photo-polymerized film for BPM–S showed higher birefringence than that for LC 242.     

Synthesis,characterization, photo‐induced alignment,and surface orientation of poly(9,9‐dioctylfluorene‐alt‐azobenzene)s

Three types of bi‐functionalized copolymers ( P1FAz , P2FAz , and P3FAz ) with different numbers of fluorene units and an azobenzene unit were synthesized and characterized using UV–vis and polarized absorption spectroanalysis. The trans‐cis photoisomerization was conformed under 400 nm light irradiation for all copolymers in chloroform. However, in the film state, only the trans‐cis photoisomerization occurred by mono‐fluorene attached copolymer poly[(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl)‐alt‐4,4′‐azobenzene)] ( P1FAz ). Photo‐induced alignment was achieved using the P1FAz film after irradiation with linear polarized 400 nm light and subsequent annealing at 60 °C. Surface orientation of a spin‐coating film of poly(9,9‐didodecylfluorene) ( F12 ) was achieved using the photo‐induced alignment layer of the P1FAz film after annealing at 90 °C. The photo‐induced alignment layer of P1FAz has potential application to the surface orientation technique for appropriate polymers, which will be useful for the fabrication of optoelectronics devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Illumination accelerates the decay of the O-intermediate of pharaonis phoborhodopsin (sensory rhodopsin II)

pharaonis phoborhodopsin (ppR, also called pharaonis sensory rhodopsin II [psRII]) is a member of the archaeal rhodopsin family and acts as a repellent phototaxis receptor of Natronobacterium pharaonis. Upon illumination, ppR is excited and undergoes a linear cyclic photoreaction, namely, a photocycle that constitutes photointermediates such as M- and O-intermediates (ppRM and ppRO, respectively). Under a constant background illumination (>600 nm) that irradiates ppRO, the decay rate of the flash-induced ppRO increased with an increase in the background light intensity, indicating the photoreactivity of ppRO. Azide did not influence the light-accelerated ppRO decay, but the time required for the cycle to be completed became shortened in an azide concentration-dependent manner because of acceleration of ppRM decay. Hence, the turnover rate of photocycling increased appreciably in the presence of both the background illumination and the azide. The observation reported previously (Schmies, G. et al. 2000, Biophys. J. 78:967-976) is discussed in connection with the present observations.     

Enhanced optical sensing of anions with amide-functionalized gold nanoparticles

A gold nanoparticle surface-modified with amide ligands shows enhanced optical sensing of anions: the detection limit is increased by about three orders of magnitude higher than that originally expected from the anion binding ability of neutral amide ligands.