Effect of take-up speed on physical properties and permeation performance of cellulose acetate hollow fibers

Cellulose acetate (CA) ultrafiltration hollow fibers were spun via the dry-jet wet spinning technique. The effect of the take-up speed on the mechanical properties, morphology, thermal properties, pure water permeation, retention, and surface characterization of hollow fiber membranes were investigated. Both the inner and outer diameters of the hollow fiber decreased with the increase of take-up speed. Macrovoids were observed on the inner surface of the drawn hollow fibers. The d-space decreased with the increase of the take-up speed. The ultimate tensile stress (UTS) increased and the breaking elongation decreased with the increase of take-up speed. The permeation performance was measured. The hydraulic permeability increased and the retention decreased slightly with the increase of the take-up speed. The surface roughness increased with the increase of the take-up speed. The thermal analysis results showed that the endothermic peak shifts to the higher temperature region and coefficient of thermal expansion (CTE) decrease for a higher take-up speed.     

Biosorption of americium-241 by Saccharomyces cerevisiae

The biosorption of radionuclide ²⁴¹Am from solution by Saccharomyces cerevisiae (S. cerevisiae), and the effects of experimental conditions on the adsorption were investigated. The preliminary results showed thatS. cerevisiae is a very efficient biosorbent. An average of more than 99% of the total ²⁴¹Am could be removed by S. cerevisiae of 2.1 g/l (dry weight) from ²⁴¹Am solutions of 17.54–4386.0 mg/l (2.22 MBq/l–555 MBq/l) with adsorption capacities of 7.45–1880.0 mg/g biomass (dry weight) (0.94 MBq/g–237.9 MBq/g). The adsorption equilibrium was achieved within 1 hour and the optimum pH ranged 1–3. No significant differences on ²⁴¹Am adsorption were observed at 10–45 °C, or in solutions containing Au³⁺ or Ag⁺, even 2000 times above ²⁴¹Am concentration. The relationship between concentrations and adsorption capacities of ²⁴¹Am indicated the biosorption process should be described by the Freundlich adsorption isotherm.     

Rational design of an “all-in-one” phototheranostic

We report here porphodilactol derivatives and their corresponding metal complexes. These systems show promise as “all-in-one” phototheranostics and are predicated on a design strategy that involves controlling the relationship between intersystem crossing (ISC) and photothermal conversion efficiency following photoexcitation. The requisite balance was achieved by tuning the aromaticity of these porphyrinoid derivatives and forming complexes with one of two lanthanide cations, namely Gd³⁺ and Lu³⁺. The net result led to a metalloporphodilactol system, Gd-trans-2, with seemingly optimal ISC efficiency, photothermal conversion efficiency and fluorescence properties, as well as good chemical stability. Encapsulation of Gd-trans-2 within mesoporous silica nanoparticles (MSN) allowed its evaluation for tumour diagnosis and therapy. It was found to be effective as an “all-in-one” phototheranostic that allowed for NIR fluorescence/photoacoustic dual-modal imaging while providing an excellent combined PTT/PDT therapeutic efficacy in vitro and in vivo in 4T1-tumour-bearing mice.

We report here porphodilactol derivatives and their corresponding metal complexes as “all-in-one” phototheranostics by controlling the relationship between intersystem crossing (ISC) and photothermal conversion efficiency following photoexcitation.     

Synthesis and near infrared luminescence of a tetrametallic Zn2Yb2 architecture from a trinuclear Zn3L2 Schiff base complex

Near infrared luminescence is observed in tetrametallic [Zn2Yb2L2(mu-OH)2Cl4].2MeCN which is obtained from the Zn3 Schiff-base complex [Zn3L2(NO3)2].MeOH, (H2L =N,N'-bis(5-bromo-3-methoxysalicylidene)propylene-1,3-diamine).     

Thiazolium-mediated multicomponent reactions: a facile synthesis of 3-aminofuran derivatives

[reaction: see text] A facile synthesis of highly functionalized 3-aminofuran derivatives by the multicomponent reactions of thiazolium salts, aldehydes, and DMAD is described.     

Simultaneous determination of neodymium, erbium and holmium in rare earth mixtures with 2-phenyltrifluoroacetone and octylphenol poly(ethyleneglycol) ether by third-derivative spectrophotometry

The complexes of the rare earth metals with 2-phenyltrifluoroacetone in the presence of TX-100 are reported. The characteristic absorbances of neodymium, holmium and erbium complexes can be increased by factors of 8.5, 31 and 15 respectively, compared to those of the cholrides. The third-derivative spectra have been used to eliminate the interference of cerium, and the sensitivities are increased again by factors of 7.4, 5.5 and 6.5. A method for the direct determination of neodymium, erbium and holmium in rare earth mixtures is proposed.     

Study on the Silylation of Aromatic Hydrocarbons. The Trimethylsilylation of Naphthalene

Direct trimethylsilylation of naphthalene under certain condition has been found to afford substitution as well as addition products: 1-and 2-trimethylsilylnaphtalene (I, II), 1-trimethylsilyl-1,4-dihydronaphthalene (III), trans-1,2-bis(trimethylsilyl)-1,2-dihydronaphthalene (IV-a) and its isomer (IV-b), and 1,2,4-tris(trimethylsilyl)-1,2-dihydronaphthalene (V). The configuration has been determined by nmr spectroscopy, and the possible reaction path was proposed.     

Prediction of retention indexes. III. Silylated derivatives of polar compounds.

Polar compounds containing hydroxyl, amino and carboxyl groups, singly or in combination, can be chromatographed after the polar functional groups are silylated. The silylated derivatives of acids, alcohols, amines, diols, amino alcohols, amino acids are shown to behave chromatographically as hydrocarbons, and their retention indexes can be readily predicted from their base values. The column difference, namely, the difference between the retention indexes of the analyte on polar and non-polar columns is minimal for the silylated derivatives in comparison to that observed for the underivatized analytes. This minimal column difference is attributed to the hydrocarbon-like chromatographic characteristics of the silylated derivatives. The retention indexes of the silyl derivatives appear to correlate with the atom number Z of the analyte.     

Stationary phase evaluations of quantum rate constants

We compute the quantum rate constant based on two extended stationary phase approximations to the imaginary-time formulation of the quantum rate theory. The optimized stationary phase approximation to the imaginary-time flux-flux correlation function employs the optimized quadratic reference system to overcome the inaccuracy of the quadratic expansion in the standard stationary phase approximation, and yields favorable agreements with instanton results for both adiabatic and nonadiabatic processes in dissipative and nondissipative systems. The integrated stationary phase approximation to the two-dimensional barrier free energy is particularly useful for adiabatic processes and demonstrates consistent results with the imaginary-time flux-flux correlation function approach. Our stationary phase methods do not require calculation of tunneling paths or stability matrices, and work equally well in the high-temperature and the low-temperature regimes. The numerical results suggest their general applicability for calibration of imaginary-time methods and for the calculation of quantum rate constants in systems with a large number of degrees of freedom.     

Thermally responsive polymeric micellar nanoparticles self-assembled from cholesteryl end-capped random poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide): synthesis, temperature-sensitivity, and morphologies

Cholesteryl end-capped thermally responsive amphiphilic polymers with two different hydrophobic/hydrophilic chain-length ratios were synthesized from the hydroxyl-terminated random poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) and cholesteryl chloroformate. The hydroxyl-terminated precursor polymers with narrow molecular weight distributions were synthesized by free-radical polymerization using 2-hydroxyethanethiol as a chain-transfer agent. The aqueous solutions of the cholesteryl end-capped copolymers exhibited reversible phase transitions at temperatures slightly above human body temperature, with the lower critical solution temperature values being 37.7 and 38.2 degrees C, respectively. The critical micelle concentration values of the two cholesteryl end-capped polymers were 9 and 25 mg/L, respectively. Polymeric micellar nanoparticles were prepared from the amphiphilic polymers using a dialysis method as well as a direct dissolution method. Transmission electron microscope studies showed that the micellar nanoparticles existed in different morphologies, including spherical, star-like, and cuboid shapes. Pyrene as a model hydrophobic compound could be readily encapsulated in these polymeric nanoparticles, at loading levels of 1.0 and 0.8 mg/g for the two cholesteryl end-capped polymers, respectively. The temperature sensitivity and unusual morphology of these novel polymeric nanoparticles would make an interesting drug delivery system.