pH值对聚四氨基酞菁钴膜电化学和紫外光谱性质的影响

用循环伏安法在导电玻璃(ITO)和玻碳电极(GC)上制备了聚氨基酞菁钴(CoTAPc)修饰电极(CoTAPc/GC)。探讨了pH值对CoTAPc膜的光谱和电化学性质的影响，发现其氧化还原电位与pH值有线性关系，电催化活性也随酸度的增加而增加。CoTAPc膜的紫外吸收带变化与溶液pH值及在溶液中浸泡时间有关。     

C NMR spectra of cyclomercurated ferrocenylimines: Substituent effects and conformations in the ferrocenes

Three series of cyclomercurated ferrocenylimines (2-chloromercurio-ferrocenylimines) have been studied using ¹³C NMR spectroscopy. Good to excellent linear relationships have been found to exist between the chemical shifts of the carbon atoms in the ferrocenyl moiety and normal Hammett substituent constants σ_m and σ_p. The δ values of the iminyl carbon atoms show excellent linear correlations with the σ values. In three series of the ferrocenes, the sensitivity of the carbon atoms to the substituent effect is different, which is discussed in terms of the twist angle between the N-phenyl ring and the C---C=N---C plane. The relative sensitivity of the chemical shifts on different positions in ferrocenyl moiety to the substituent effect has also been presented.     

Synthesis,crystal structures and magnetic properties of transition metal dicyanamide complexes coordinated with pyridyl nitronyl nitroxides

Two novel complexes Ni(NITpPy)₂[N(CN)₂]₂ · 2H₂O (I) and Zn(NITpPy)₂[N(CN)₂]₂ · 2H₂O (II) (NITpPy = 2-(p-pyridyl)-4,4,5,5- tetramethylimidazoline-1-oxyl-3-oxide) were synthesized and characterized by infrared spectra, elemental analyses, and UV-Vis techniques. The crystal structures of both complexes have been determined by X-ray diffraction analysis. Both complexes are of centrosymmetric distorted octahedral co-ordination geometry in which metal ions are bound to two dicyanamide anions, two water molecules, and two radicals through the nitrogen atom of pyridine rings and show one-dimensional chain structure via hydrogen bonds. The magnetic properties of complexes I and II were investigated in the temperature range 5–300 K and discussed in detail. The two compounds exhibit weak intermolecular antiferromagnetic interaction. In complex II, the diamagnetic metal zinc just plays the role of a bridge. The article was submitted by the authors in English.     

过渡金属与二取代冠醚固态配合物的制备

由４＇，５＇－二碘苯并１５冠５，４＇，５＇－二溴苯并１５冠５，４＇－溴－５＇－硝基苯并１５冠５，四溴二苯并１８冠６与过渡全属Ｍｎ（Ⅱ）、Ｃｏ（Ⅱ）、Ｃｕ（Ⅱ）、Ｚｎ（Ⅱ）、Ａｇ（Ⅱ）、Ｃｄ（Ⅱ）的硝酸盐、高氯酸盐、气化物合成了１９个未见报道的固态配合物。用元素分析、红外光谱、摩尔电导和差热－热重分析等表征了它们的组成和性质。     

Efficient dehalogenation of polyhalomethanes and production of strong acids in aqueous environments: water-catalyzed O--H-insertion and HI-elimination reactions of isodiiodomethane (CH2I-I) with water

A combined experimental and theoretical study of the ultraviolet photolysis of CH2I2 in water is reported. Ultraviolet photolysis of low concentrations of CH2I2 in water was experimentally observed to lead to almost complete conversion into CH2(OH)2 and 2HI products. Picosecond time-resolved resonance Raman spectroscopy experiments in mixed water/acetonitrile solvents (25%-75% water) showed that appreciable amounts of isodiiodomethane (CH2I-I) were formed within several picoseconds and the decay of the CH2I-I species became substantially shorter with increasing water concentration, suggesting that CH2I-I may be reacting with water. Ab initio calculations demonstrate the CH2I-I species is able to react readily with water via a water-catalyzed O--H-insertion and HI-elimination reaction followed by its CH2I(OH) product undergoing a further water-catalyzed HI-elimination reaction to make a H2C=O product. These HI-elimination reactions produce the two HI leaving groups observed experimentally and the H2C=O product further reacts with water to produce the other final CH2(OH)2 product observed in the photochemistry experiments. These results suggest that CH2I-I is the species that reacts with water to produce the CH2(OH)2 and 2HI products seen in the photochemistry experiments. The present study demonstrates that ultraviolet photolysis of CH2I2 at low concentration leads to efficient dehalogenation and release of multiple strong acid (HI) leaving groups. Some possible ramifications for the decomposition of polyhalomethanes and halomethanols in aqueous environments as well as the photochemistry of polyhalomethanes in the natural environment are briefly discussed.     

Calycilactone A, a novel hexacyclic alkaloid from Daphniphyllum calycillum

A novel Daphniphyllum alkaloid with a rearranged fused-hexacyclic ring system, calycilactone A, was isolated from the leaves of Daphniphyllum calycillum (Daphniphyllaceae), and the structure and relative stereochemistry of the new compound were elucidated on the basis of spectroscopic data.     

EFFECT OF MOLECULAR WEIGHT OF PDMS ON MORPHOLOGY AND MECHANICAL PROPERTIES OF PP/PDMS BLENDS

 A series of polydimethylsiloxane (PDMS) with varied molecular weights (Mw = 3  106, 1  106 and 0.5  106) were melt blended with PP to investigate the effect of PDMS molecular weight (MW) on the morphology and mechanical properties of PP/PDMS blends. Scanning electron microscopic (SEM) examination showed that the size of PDMS domains was dependent on the MW of PDMS. It was found that the lower the value of PDMS MW, the better dispersion of the PDMS domains in the PP matrix. Tensile and Izod impact tests revealed that the addition of PDMS with lower MW would lead to a more significant increase in impact strength of the blends compared with the blends with higher MW ones, while the influence of the molecular weight on tensile strengths of the blends was relatively small in the MW range studied. Differential scanning calorimetry (DSC) results also showed that the crystallization temperature of PP was increased with decreasing PDMS MW, indicating a better nucleation capability of lower MW of PDMS. Melting flow rate (MFR) measurements indicated that the processibility of PP could be enhanced by adding PDMS, and again the lower MW PDMS resulted in better data. Our work demonstrates that not only the processibility but also the mechanical properties of PP could be enhanced to a more significant degree by using low MW PDMS than the higher ones.     

Sensitive Determination of DNA by Resonance Light Scattering with Pentamethoxyl Red

A novel sensitive method for the determination of nucleic acid (DNA) using the resonance light scattering (RLS) spectra of pentamethoxyl red has been developed. It is based on the effects on the resonance light scattering of Pentamethoxyl Red. The effective factors and the optimum conditions were studied, and the enhanced intensity of RLS is in proportion to the concentration of nucleic acids in the range of 0–2.54 µg mL⁻¹ for ct-DNA, 0–4.54 µg mL⁻¹ for hs-DNA. The limits of detection are 1.1 and 2.1 ng mL⁻¹, respectively. Most foreign substances do not interfere in the determination, and the method has good selectivity and high sensitivity. It has been applied to the determination of DNA in synthetic samples and in real samples with satisfactory results.     

Agonist–PPARγ interactions: Molecular modeling study with docking approach

Docking simulation of 18 agonists with the ligand binding pocket (LBP) of PPARγ has been performed. The binding conformations and binding affinities of these agonists were obtained by use of the flexible docking protocol FlexX. Test compound calculations indicated that FlexX can reproduce the binding conformation of the crystal structure (root mean square deviation = 1.43 Å); moreover, the predicted binding affinities correlate well with the activities of these agonists. The interaction model and pharmacophore of PPARγ agonists were derived and the difference in biologic activities of these agonists can be well explained. The PPARγ agonists must have both polar head and the hydrophobic tail, which form hydrogen bonds and hydrophobic contacts with hydrophilic and hydrophobic regions of the LBP of PPARγ, respectively. In addition, a suitable linker is also necessary. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 93: 405–410, 2003     

The detection of formaldehyde in textiles using interdigitated microelectrode array diffusion layer titration with electrogenerated hypobromite

An interdigitated microelectrode array (IDA) was applied to the determination of formaldehyde released from textiles produced in industry. The proposed method is based on formaldehyde reaction with hypobromite which is formed in weakly basic media by control current electrooxidation of bromide on the generator segment of the IDA array. The unreacted hypobromite diffuses through the gap between individually polarisable IDA segments and it is amperometrically detected on the collector segment of the IDA. The efficiency of this nonconvective transfer process in the absence of formaldehyde was substantially higher (78%) in comparison with that when using the rotating ring disc electrode. The influence of the added formaldehyde on the transfer process can be utilised to develop a simple and sensitive analytical procedure for formaldehyde detection with a detection limit of 4×10⁻⁶ mol dm⁻³.