Mechanisms and kinetics of trisodium 2-hydroxy-1,1'-azonaphthalene-3,4',6-trisulfonate adsorption onto chitosan

Chitosan, a naturally abundant biopolymer, has widely been studied for metal adsorption from various solutions, but the extension of chitosan as an adsorbent to remove organic substances from water and wastewater has seldom been explored. In this study, the adsorption of an azo dye, trisodium 2-hydroxy-1,1'-azonaphthalene-3,4',6-trisulfonate (1), from aqueous solution onto the various degrees of deacetylated chitosan has been investigated. Equilibrium studies have been carried out to determine the capacity of chitosan for dye. The experimental data were analyzed using two isotherm correlations, namely, Langmuir and Freundlich equations. The linear correlation coefficients were determined for each isotherm and the Langmuir provided the best fit. The experimental adsorption isotherms were perfectly reproduced in the simulated data obtained from numerical analysis on the basis of the Langmuir model and the isotherm constants. Adsorption of (1) onto the chitosan flakes was found to be strongly depending on degrees of deacetylation in chitosan and temperatures. Significant amounts of (1) were adsorbed by chitosan 8B (higher degree of deacetylated chitosan), but the adsorption capacity was reduced remarkably with increasing solution temperatures. Thermodynamic parameters such as change in free energy (DeltaG), enthalpy (DeltaH), and entropy (DeltaS) were also determined. In addition, kinetic study indicated that the adsorption process mechanisms were both transport- and attachment-limited.     

Facile and chemo-selective synthesis of tertiary alkyl isothiocyanates from alcohols

When tert-alcohols were treated with (COOH)₂ and NaSCN in the presence of iodine, tertiary alkyl isothiocyanates were obtained in good yield, whereas the corresponding thiocyanates were obtained in low yield in the absence of iodine.     

Synthesis of marine guanidine alkaloids and their application as chemical/biological tools

Ptilomycalin A and crambescidins, novel marine guanidine alkaloids, have a unique pentacyclic guanidine structure, and exhibit a considerable array of biological activities. The first method developed for the synthesis of the pentacyclic guanidine core structure involved successive 1,3-dipolar cycloaddition reactions and resulted in the first total synthesis of crambescidin 359. The synthesis of other pentacyclic guanidine derivatives has been based on this methodology and applied as tools for studying biological activities, and as chemical reaction catalysts.     

Stereoselective allyl amine synthesis through enantioselective addition of diethylzinc and [1,3]-chirality transfer: synthesis of lentiginosine and polyoxamic acid derivative

A new synthetic method for the preparation of allyl amines has been developed. The key steps of this method are enantioselective addition of diethylzinc and [1,3]-chirality transfer through the [3.3] sigmatropic rearrangement of allyl cyanates. Stereocontrolled syntheses of lentiginosine (1) and polyoxamic acid derivative 2 from a common intermediate 7 derived from D-tartaric acid (8), have been accomplished.     

α- and γ-Regiocontrol and Enantiospecificity in the Copper-Catalyzed Substitution Reaction of Propargylic Phosphates with Grignard Reagents

The regioselectivity (r.s.) and enantiospecificity (e.s.) of the substitution reactions of secondary propargylic alcohol derivatives using reagents derived from ArMgBr and Cu salts were studied. First, the picolinate, 3-methylpicolinate, and diethylphosphonate derivatives of Ph(CH₂)₂CH(OH)C≡CTMS were reacted with PhMgBr/CuCN in ratios of 2.5:2.7–2.5:0.25. The use of 2.5:0.25 ratio in THF/DME (6:1) at 0 °C for 1 h afforded the α-substitution product from the phosphate with ≥98 % r.s. and 99 % e.s. CuBr⋅Me₂S gave similar selectivity. The reaction system was then applied to phosphates derived from R¹CH(OH)C≡CR² and ArMgBr to obtain synthetically sufficient r.s. and e.s. values with R²=TMS, Ph, whereas iPr was borderline in terms of size as an R¹ substituent. The presence of a substituent at the o-position of Ar marginally affected the selectivity. We also found that the use of PhMgBr/Cu(acac)₂ in a 2:1 ratio in THF produced the γ-substitution products (allenes) with high r.s. and e.s.     

Cubic phases of 4′-n-alkoxy-3′-nitrobiphenyl-4-carboxylic acids (ANBC-n)

The structure of the thermotropic cubic phases of 4′- ⁿ -alkoxy-3′-nitrobiphenyl-4-carboxylic acids (ANBC- ⁿ , where ⁿ indicates the number of carbon atoms in the alkoxy group) was studied by X-ray diffraction. For the homologues with ⁿ = 15, 16, 17, and 18, the cubic phase was of an ^Ia 3 ^d type, whereas the homologues with ⁿ = 19, 20, and 21 exhibited an ^Im 3 ^m cubic structure; for these seven homologues the same type of cubic structure was observed both on heating and cooling. Further lengthening of the alkoxy chain to ⁿ = 22 and 26, however, gave two types of cubic structure in the cubic phase region on heating, one with ^Im 3 ^m symmetry in the low temperature region and the other with ^Ia 3 ^d symmetry in the high temperature region. On cooling, the two homologues exhibited the ^Ia 3 ^d cubic structure only. This is the first example in the cubic phase region of a series of homologues containing two types of structure, dependent on temperature and ⁿ . Such a complicated phase diagram in the cubic region is clearly understood qualitatively in terms of Gibbs free energy-temperature diagrams. The dependence of structural parameters such as the cubic lattice constant on the alkoxy chain length ⁿ are also presented and discussed.     

Hybrid EuIII Coordination Luminophore Standing on Two Legs on Silica Nanoparticles for Enhanced Luminescence

In this study, we have demonstrated a two-legged, upright molecular design method for monochromatic and bright red luminescent Ln^III-silica nanomaterials. A novel Eu^III-silica hybrid nanoparticle was developed by using a doubly binding TPPO−Si(OEt)₃ (TPPO: triphenyl phosphine oxide) linker. The TPPO−Si(OEt)₃ was confirmed by ¹H, ³¹P, ²⁹Si NMR spectroscopy and single-crystal X-ray analysis. Luminescent Eu(hfa)₃ and Eu(tfc)₃ moieties (hfa: hexafluoroacetylacetonate, tfc: 3-(trifluoromethylhydroxymethylene)camphorate) were fixed onto TPPO−Si(OEt)₃-modified silica nanoparticles, producing Eu(hfa)₃(TPPO−Si)₂-SiO₂ and Eu(tfc)₃(TPPO−Si)₂-SiO₂, respectively. Eu(hfa)₃(TPPO−Si)₂−SiO₂ exhibited the higher intrinsic luminescence quantum yield (93 %) and longer emission lifetime (0.98 ms), which is much larger than those of previously reported Eu^III-based hybrid materials. Eu(tfc)₃(TPPO−Si)₂−SiO₂ showed an extra-large intrinsic emission quantum yield (54 %), although the emission quantum yield for the precursor Eu(tfc)₃(TPPO−Si(OEt)₃)₂ was found to be 39 %. These results confirmed that the TPPO−Si(OEt)₃ linker is a promising candidate for development of Eu^III-based luminescent materials.     

Large electro‐optic activity and enhanced temporal stability of methacrylate‐based crosslinking hyperbranched nonlinear optical polymer

A methacrylate‐based crosslinking hyperbranced polymers have been synthesized through initiator‐fragment incorporation radical polymerization and used for the temperature stable electro‐optic (EO) polymer application. This polymer consists of methyl methacrylate, 2‐metacryloxyethyl isocyanate, and ethylene glycol dimethacrylate (EGDMA) monomers. The use of EGDMA as a bifunctional unit resulted in the solvent‐soluble crosslinking hyperbranched chain, so that the EO polymer enhanced glass transition temperatures. A phenyl vinylene thiophene vinylene bridge nonlinear optical chromophore was attached to the polymer backbone as the side‐chain by a post‐functionalization reaction. The loading concentration of the chromophore was varied between 30 and 50 wt % by simply changing the mixing ratio of the precursor polymer to the chromophore. The synthesized EO polymers produced optical quality films with a light propagation loss of 0.61 dB/cm in a slab waveguide at 1.31 μm. The electrically poled film had an EO coefficient (r₃₃) of 139 pm/V at 1.31 μm. The EO crosslinking hyperbranced polymer had a high‐glass transition temperature of 170 °C, and exhibited excellent temporal stability of the EO activity at 85 °C for 500 h. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012